Care Unlock  
Your online unlock store
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features. By joining our free community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join our community today!

If you have any problems with the registration process or your account login, please contact contact us.

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > Cruiser Team Products > Cruiser Suite

Reply
 
LinkBack Thread Tools Display Modes
Old 08-10-2007, 13:31   #1 (permalink)
Freak Poster
 
Join Date: Mar 2007
Posts: 358
Member: 476697
Status: Offline
Thanks: 16
Thanked 5 Times in 5 Posts
Question Problem with w810and k510

Hi
I flashed completly but It stops sony ericson
please help me
  Reply With Quote
Old 08-10-2007, 18:14   #2 (permalink)
Super Moderator
 
THE CLASH's Avatar
 
Join Date: Aug 2005
Location: UK..
Age: 47
Posts: 4,426
Member: 173077
Status: Offline
Sonork: 100.1594293
Thanks: 0
Thanked 775 Times in 400 Posts
tell us a little more, what you have done, are you having problems with 2 phones,
have you flashed any sony phones with cruiser before.
  Reply With Quote
Old 08-11-2007, 01:37   #3 (permalink)
No Life Poster
 
Lhick's Avatar
 
Join Date: Aug 2006
Location: InsideOut
Posts: 5,689
Member: 333359
Status: Offline
Thanks: 0
Thanked 90 Times in 74 Posts
Quote:
Originally Posted by hossein1155 View Post
Hi
I flashed completly but It stops sony ericson
please help me
You have the same avatar as mauro1947.
  Reply With Quote
Old 08-11-2007, 03:16   #4 (permalink)
No Life Poster
 
kashi4gul's Avatar
 
Join Date: Mar 2007
Age: 28
Posts: 4,514
Member: 460762
Status: Offline
Sonork: 100.1592082
Thanks: 554
Thanked 3,096 Times in 823 Posts
Quote:
Originally Posted by hossein1155 View Post
Hi
I flashed completly but It stops sony ericson
please help me
Post ur log here, so that
mates could understood properly
where is the problem which u r facing........
  Reply With Quote
Old 08-11-2007, 08:58   #5 (permalink)
Freak Poster
 
Join Date: Mar 2007
Posts: 358
Member: 476697
Status: Offline
Thanks: 16
Thanked 5 Times in 5 Posts
Quote:
Originally Posted by THE CLASH View Post
tell us a little more, what you have done, are you having problems with 2 phones,
have you flashed any sony phones with cruiser before.
yes i have useed then befor but i have problem with K510, w810
more ever I have flashed with setool but my problem havent been solved
  Reply With Quote
Old 08-11-2007, 20:10   #6 (permalink)
Super Moderator
 
THE CLASH's Avatar
 
Join Date: Aug 2005
Location: UK..
Age: 47
Posts: 4,426
Member: 173077
Status: Offline
Sonork: 100.1594293
Thanks: 0
Thanked 775 Times in 400 Posts
What stops, does it fail when you customise, ??
does the please wait screen stay for ever...??

@lhick.. who gives a toss, now he will have somebody elses...???
  Reply With Quote
Old 08-11-2007, 20:30   #7 (permalink)
Crazy Poster
 
Join Date: Sep 2006
Location: PAKISTAN Punjab (pakpattan)
Age: 26
Posts: 52
Member: 342058
Status: Offline
Thanks: 2
Thanked 3 Times in 3 Posts
hi dear right GDFS
  Reply With Quote
Old 08-12-2007, 06:52   #8 (permalink)
Freak Poster
 
Join Date: Mar 2007
Posts: 358
Member: 476697
Status: Offline
Thanks: 16
Thanked 5 Times in 5 Posts
Quote:
Originally Posted by funnyhamid View Post
hi dear right GDFS
no problem with gdfs
phone is stops arm sonyericson
  Reply With Quote
Old 08-13-2007, 00:34   #9 (permalink)
No Life Poster
 
BENCHENA's Avatar
 
Join Date: Feb 2005
Location: El M'Hayssar
Age: 37
Posts: 932
Member: 116657
Status: Offline
Thanks: 113
Thanked 45 Times in 25 Posts
Quote:
Originally Posted by hossein1155 View Post
no problem with gdfs
phone is stops arm sonyericson
if want a real answer you should post your log here

BR BENCHENA
  Reply With Quote
Old 08-15-2007, 00:59   #10 (permalink)
No Life Poster
 
Jazz's Avatar
 
Join Date: Jan 2006
Location: Canada
Posts: 588
Member: 219362
Status: Offline
Thanks: 14
Thanked 25 Times in 24 Posts
I am having a similar problem now with a W-810i from Rogers (Canada).

Here is my log. The first part I unlocked the phone, then I reflashed to decustomize.

Quote:
System diagnostics passed.
Version 11.06 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49

Phone type (from GDFS): W810i
CXC article: R4DB005 prgCXC1250316_GENERIC_HN
CXC version: R4DB005
Language package: ROGERS
Operator: Rogers Wireless
CDA article: CDA102494/128
CDA version: R1A
Default article: cxc1250324
Default version: R4DD001

Phonecode: 0000

Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Unlock RSA --- ]
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:00:01
Flash process done.
Phone automatically detached.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...

[ --- Detach Phone --- ]
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49

Phone type (from GDFS): W810i
CXC article: R4DB005 prgCXC1250316_GENERIC_HN
CXC version: R4DB005
Language package: ROGERS
Operator: Rogers Wireless
CDA article: CDA102494/128
CDA version: R1A
Default article: cxc1250324
Default version: R4DD001

Phonecode: 0000

Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Direct Unlock --- ]
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Initializing applet...
Baudrate = 460800Bd
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Defeated!
Sending applet...
Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER...
Sending applet...
Applet ID: 060430 0501 CRUCXC1326743_COMPACTPR...
Reading security zone...
Unlocking phone...
Recalculating CRCs...
Phonecode: 0000 (default)
Turning off phone...
Phone automatically detached.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49

Phone type (from GDFS): W810i
CXC article: R4DB005 prgCXC1250316_GENERIC_HN
CXC version: R4DB005
Language package: ROGERS
Operator: Rogers Wireless
CDA article: CDA102494/128
CDA version: R1A
Default article: cxc1250324
Default version: R4DD001

Phonecode: 0000 (default)

Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Restore Firmware --- ]
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.

[ --- Detach Phone --- ]
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...

[ --- Detach Phone --- ]
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49

Phone type (from GDFS): W810i
CXC article: R4DB005 prgCXC1250316_GENERIC_HN
CXC version: R4DB005
Language package: ROGERS
Operator: Rogers Wireless
CDA article: CDA102494/128
CDA version: R1A
Default article: cxc1250324
Default version: R4DD001

Phonecode: 0000 (default)

Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Restore Firmware --- ]
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Initializing applet...
Baudrate = 460800Bd
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Identifying firmware...
Firmware ID: prgCXC1250316_GENERIC_HN
Firmware version: R4DB005
Defeated!
Sending applet...
Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER...
Sending applet...
Applet ID: 060430 0501 CRUCXC1326743_COMPACTPR...
Searching for FW restoral file...
File name: R4DB005_CXC1250316_GENERIC_HN.cw81sw
FW restoral file found.
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
RSA protection was set back to normal.
Time: 00:00:07
Flash process done.

[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49

Phone type (from GDFS): W810i
CXC article: R4DB005 prgCXC1250316_GENERIC_HN
CXC version: R4DB005
Language package: ROGERS
Operator: Rogers Wireless
CDA article: CDA102494/128
CDA version: R1A
Default article: cxc1250324
Default version: R4DD001

Phonecode: 0000 (default)

Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Unlock RSA --- ]
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:00:01
Flash process done.
Phone automatically detached.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49

Phone type (from GDFS): W810i
CXC article: R4DB005 prgCXC1250316_GENERIC_HN
CXC version: R4DB005
Language package: ROGERS
Operator: Rogers Wireless
CDA article: CDA102494/128
CDA version: R1A
Default article: cxc1250324
Default version: R4DD001

Phonecode: 0000 (default)

Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Raw File System --- ]
Flash file: "W810i_CXC1250324_Mediterr_R4DB005_Red49.cw81f s"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:04:17
Flash process done.

[ --- Customize File System --- ]
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Initializing applet...
Baudrate = 460800Bd
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Defeated!
Sending applet...
Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER...
Sending CS applet...
The applet ignored baudrate change request!
Applet ID: 060508 0506 CRUCXC1327364_COMPACT_S...
Initializing CS applet...
Applet ID: 060508 0506 CRUCXC1327364_COMPACT_S...
Baudrate = 921600Bd
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102555/4
Done.
Writing CDA Version MS string...
New value: R1A
Done.
Writing Default Article MS string...
New value: cxc1250324
Done.
Writing Default Version MS string...
New value: R4DB005
Done.
Writing langpack string...
New value: MEDITERR
Done.
Writing country...
New value: Generic Trade
Done.
Uploading certificates...
Certificates uploaded successfuly.

[ --- Detach Phone --- ]
Terminating threads...
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 49

Phone type (from GDFS): W810i
CXC article: R4DB005 prgCXC1250316_GENERIC_HN
CXC version: R4DB005
Language package: MEDITERR
Operator: Generic Trade
CDA article: CDA102555/4
CDA version: R1A
Default article: cxc1250324
Default version: R4DB005

Phonecode: 0000 (default)

Sending applet...
Applet ID: 061204 1528 HAN_DB2010_FLASHLOADER_...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Main Firmware --- ]
Flash file: "W810i_CXC1250316_Generic_R4DB005_Red49.cw81sw "
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:09:08
Flash process done.

[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.
  Reply With Quote
Old 08-15-2007, 01:09   #11 (permalink)
No Life Poster
 
Jazz's Avatar
 
Join Date: Jan 2006
Location: Canada
Posts: 588
Member: 219362
Status: Offline
Thanks: 14
Thanked 25 Times in 24 Posts
I just tried to write the GDFS from file (from an automatic backup), and here is the log:

Quote:
[ --- Write to GDFS --- ]
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Initializing applet...
Baudrate = 460800Bd
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_S...
Defeated!
Sending applet...
Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER...
Sending CS applet...
The applet ignored baudrate change request!
Applet ID: 060508 0506 CRUCXC1327364_COMPACT_S...
Initializing CS applet...
Applet ID: 060508 0506 CRUCXC1327364_COMPACT_S...
Baudrate = 921600Bd
Starting up GDFS service...
Backing up GDFS security zone...
Started writing to GDFS...
Writing security zone...
Refusing to write into security zone...
Done.
  Reply With Quote
Old 08-15-2007, 03:42   #12 (permalink)
No Life Poster
 
SALIMUS's Avatar
 
Join Date: Feb 2004
Location: ALGERIA
Posts: 2,217
Member: 54116
Status: Offline
Thanks: 82
Thanked 218 Times in 116 Posts
chek battery voltage and tray with full one .
unchek :
displaye more info on connection.

and prie for ur phone ;-)

br
  Reply With Quote
Old 08-15-2007, 03:47   #13 (permalink)
Junior Member
 
Join Date: Apr 2007
Location: NAGA CITY - PHILIPPINES
Posts: 27
Member: 480098
Status: Offline
Thanks: 16
Thanked 1 Time in 1 Post
Quote:
Originally Posted by hossein1155 View Post
yes i have useed then befor but i have problem with K510, w810
more ever I have flashed with setool but my problem havent been solved
flash your K510i with ub then post result....
  Reply With Quote
Old 08-15-2007, 04:13   #14 (permalink)
No Life Poster
 
kashi4gul's Avatar
 
Join Date: Mar 2007
Age: 28
Posts: 4,514
Member: 460762
Status: Offline
Sonork: 100.1592082
Thanks: 554
Thanked 3,096 Times in 823 Posts
Flashing sequence is absolutely wrong........
  Reply With Quote
Old 08-15-2007, 18:23   #15 (permalink)
No Life Poster
 
Jazz's Avatar
 
Join Date: Jan 2006
Location: Canada
Posts: 588
Member: 219362
Status: Offline
Thanks: 14
Thanked 25 Times in 24 Posts
Quote:
Originally Posted by kashi4gul View Post
Flashing sequence is absolutely wrong........
Are you referring to my flashing sequence in Post #10 above? If yes, then that sequence has worked for me countless times before.
  Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
thread Thread Starter Forum Replies Last Post
problem with k510 camera sahil00150 Sony Ericsson Hardware Repair Area 1 04-12-2009 08:57
Problem with K510 CID50 & Cruiser 13.20 g-zona Cruiser Suite 9 11-07-2008 16:14
Problem with k510 and W300 bu_ta Seking Server 0 10-30-2007 08:45
problem with reflash SE K510 alexvideogames Universalbox 0 09-07-2007 11:19


All times are GMT +1. The time now is 02:51.



Powered by Searchlight © 2013 Axivo Inc.
- GSM Hosting Ltd. - 1999-2013 -
Page generated in 0.43004 seconds with 11 queries

SEO by vBSEO