t610 reboot ???? - GSM-Forum

Nokall · 05-20-2005, 05:23

any solucion to t610 reboot phones whit new versions r6c ??? because i have 3 t610 if i flash phone whit last version phone only reboot if i put flash r1 phones ok but camera don´t work ,

some man have downgrade phone version r6c to r3c.

gbluez · 05-22-2005, 19:33

Yes,, me too. its alot of T610 reboot now (if upgrade to r6c from previous), i dont know why..
Also:
camera---> capture----> phone freezed!!!! How?How?How? Sent to SE service center, they said it has to change the board. didnt solved until now.

fingusio · 05-22-2005, 19:42

If you have T610 or T630 with R6C version, always downgrade to R4C005 (MCU and MOD!!!!!!) and all works fine.
If flash to other version yes camera , irda dosen't work.

br.
fingusio

gbluez · 05-22-2005, 21:00

must be r4c or other bellow r6c can?
also AVR / ARM but not the GDFS , right?

regards

fingusio · 05-22-2005, 21:48

Must be R4C005. Other version if you flash, camera and irda will be dont work;/ Yes ARM and AVR must be R4C005.
I test it on 20 T610 and always same problem if flash by other version than R4C

br.
fingusio

hrco · 05-23-2005, 08:29

I have one similar problem, but this my in first have problem whit lcd light, phone work well but light is not working good, bilinking and other stuff!then I upgrade on last version, and then I get restart problem, and light problem was gone, back on R4C version not get any result....gdfs reflash, whit all know version gdfs1,2, total....nothing help!
Then I open phone rehot bouth flashes and phoen stop restart, but no network!
Then I get info from se offical service this problem shows becouse demage flash chips...and then i give it up...

This is my expirince whit this problem, maybe help you!
redgards
hrco!bye,bye....

Nokall · 05-23-2005, 17:19

here is flash R4C005??? i only find r4c003 , in cruiser suporte and tornado

gbluez · 05-31-2005, 17:54

maybe i got other faults fones.. bad luck with r4c. still the same error. all, arm/avr/gdfs/recalc. dcrc.... still same error. Camera ok, but when capture image; please wait........ phone freezed then reboot it self. It make me temptation, because SE service center told it has to swap the board.

05-20-2005, 05:23	#1 (permalink)
Nokall No Life Poster Join Date: Jun 2002 Location: Portugal Lisbon* Age: 45 Posts: 893 Member: 13223 Status: Offline Thanks Meter: 59	t610 reboot ???? any solucion to t610 reboot phones whit new versions r6c ??? because i have 3 t610 if i flash phone whit last version phone only reboot if i put flash r1 phones ok but camera don´t work , some man have downgrade phone version r6c to r3c.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
T610 reboot after 15 sec	gorbulas	Sony Ericsson	20	11-11-2004 20:38
T610 Reboot	wintesla	Sony Ericsson Hardware Repair	1	08-14-2004 23:34
t610 reboots	gsnbhagawan	Sony Ericsson	0	01-14-2004 10:47
T610 Rebooting	yeldar	Sony Ericsson	2	12-17-2003 19:57
T610 reboot problem	mathis	Sony Ericsson	7	11-24-2003 16:55

05-22-2005, 19:33	#2 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	Yes,, me too. its alot of T610 reboot now (if upgrade to r6c from previous), i dont know why.. Also: camera---> capture----> phone freezed!!!! How?How?How? Sent to SE service center, they said it has to change the board. didnt solved until now.

05-22-2005, 19:42	#3 (permalink)
fingusio No Life Poster Join Date: Oct 2002 Posts: 2,367 Member: 16927 Status: Offline Thanks Meter: 134	If you have T610 or T630 with R6C version, always downgrade to R4C005 (MCU and MOD!!!!!!) and all works fine. If flash to other version yes camera , irda dosen't work. br. fingusio

05-22-2005, 21:00	#4 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	must be r4c or other bellow r6c can? also AVR / ARM but not the GDFS , right? regards

05-22-2005, 21:48	#5 (permalink)
fingusio No Life Poster Join Date: Oct 2002 Posts: 2,367 Member: 16927 Status: Offline Thanks Meter: 134	Must be R4C005. Other version if you flash, camera and irda will be dont work;/ Yes ARM and AVR must be R4C005. I test it on 20 T610 and always same problem if flash by other version than R4C br. fingusio

05-23-2005, 08:29	#6 (permalink)
hrco No Life Poster Join Date: Sep 2002 Location: home Posts: 946 Member: 15506 Status: Offline Thanks Meter: 3	I have one similar problem, but this my in first have problem whit lcd light, phone work well but light is not working good, bilinking and other stuff!then I upgrade on last version, and then I get restart problem, and light problem was gone, back on R4C version not get any result....gdfs reflash, whit all know version gdfs1,2, total....nothing help! Then I open phone rehot bouth flashes and phoen stop restart, but no network! Then I get info from se offical service this problem shows becouse demage flash chips...and then i give it up... This is my expirince whit this problem, maybe help you! redgards hrco!bye,bye....

05-23-2005, 17:19	#7 (permalink)
Nokall No Life Poster Join Date: Jun 2002 Location: Portugal Lisbon* Age: 45 Posts: 893 Member: 13223 Status: Offline Thanks Meter: 59	here is flash R4C005??? i only find r4c003 , in cruiser suporte and tornado

05-31-2005, 17:54	#8 (permalink)
gbluez No Life Poster Join Date: Jul 2004 Posts: 11,049 Member: 73565 Status: Offline Thanks Meter: 5,062	maybe i got other faults fones.. bad luck with r4c. still the same error. all, arm/avr/gdfs/recalc. dcrc.... still same error. Camera ok, but when capture image; please wait........ phone freezed then reboot it self. It make me temptation, because SE service center told it has to swap the board.