safe unlock both K608 & K750i both cid 49 - GSM-Forum

zigma300 · 05-08-2006, 19:06

Plz can you give 99.99 % sure procedure for these fones.

Only unlock

Br
Ziggy

Lead · 05-08-2006, 20:08

Quote:

Originally Posted by zigma300

Plz can you give 99.99 % sure procedure for these fones.

Only unlock

Br
Ziggy

Flashing red CID49 phones:

Attach.
Unlock RSA.
Reattach.
Flash main FW and raw FS.
Customize FS.
Turn off phone.

Unlocking red CID49 phones:

Attach.
Unlock RSA.
Reattach and flash restore file (of the same version as main FW).
Direct unlock.

More procedures will be released tomorrow.

Lead · 05-08-2006, 20:10

To unlock AND flash red CID49 phones:

Attach.
Unlock RSA.
Reattach.
Unlock.
Reattach.
Flash main FW and raw FS.
Customize FS.
Turn off phone.

Lead · 05-08-2006, 20:11

To attach phone you may use Ctrl-A.
To turn the phone off you may use Ctrl-O.

Lead · 05-08-2006, 20:18

These procedures are correct for flashing CID36 or brown CID49 files to red CID49 phones. For flashing red CID49 files to red CID49 phones a different procedure is needed.

zigma300 · 05-08-2006, 20:23

thank you master Lead i think this should be sticky because information is complete.

Lead · 05-08-2006, 20:29

The information will be extended and put to the Cruiser help file.

Linkinsoldier · 05-08-2006, 20:40

thx Mr. LEAD. You answered a lot of my questioned today! I will wait for the guide now, so you dont need to answer them along six hundret times...

hossam_on_line · 05-08-2006, 20:45

Mr leed i flash alot of w550 red cid 49 without unlock rsa just i convert it to browen and after i finish flahing and custmoize i convert it again to red .... and work very fine ... any proplem in this way ... ?

Gerti · 05-08-2006, 21:13

For me the safe mode for unlock this phone now is Usb-Smart,or with Setool with tespoint .

Kashif Khan · 05-08-2006, 21:15

Thanx for the very useful info Lead.
BR
Kashif Khan

Top Sony · 05-09-2006, 00:50

This sequence has not worked, I have proven several times without success:

Flashing red CID49 phones:
1-Attach.
2-Unlock RSA.
3-Reattach.
4-Flash main FW and raw FS.
5-Customize FS.
6-Turn off phone.
------------------------------
I obtained success with this sequence:

1-Attach.
2-Unlock RSA.
3-Reattach.
4-Flash main FW and raw FS.
5-Reattach.
6-Unlock RSA.
7-Reattach and flash restore file
8-Customize FS.
9-Turn off phone.

Version 9.54 ready!
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Unknown phone detected.
Phone CID: 26728
Phone color: Unknown
Use testpoint to boot the phone!
All threads terminated.
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2000_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
Preparing to program flash...
Programming flash...
Time: 00:00:01
Flash process done.
Phone automatically detached.
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2000_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
Flash file: "R5BC004_CXC1250057_GENERIC_SA.cw9sw"
Waiting for flash file to load...
Preparing to program flash...
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Initializing applet...
Baudrate = 460800Bd
Identifying firmware...
Firmware ID: prgCXC1250057_GENERIC_SA
Firmware version: R5BC004
Defeated!
Sending applet...
Programming flash...
RSA protection was set back to normal.
Time: 00:00:06
Flash process done.
Sending CS applet...
Initializing CS applet...
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
Done.
Writing CDA Version MS string...
Done.
Writing Default Article MS string...
Done.
Writing Default Version MS string...
Done.
Writing langpack string...
Done.
Writing country...
Done.
Uploading certificates...
Certificates uploaded successfuly.

Some explanation?

whiteswang · 05-09-2006, 01:59

Quote:

Originally Posted by Top Sony

This sequence has not worked, I have proven several times without success:

Flashing red CID49 phones:
1-Attach.
2-Unlock RSA.
3-Reattach.
4-Flash main FW and raw FS.
5-Customize FS.
6-Turn off phone.
------------------------------
I obtained success with this sequence:

1-Attach.
2-Unlock RSA.
3-Reattach.
4-Flash main FW and raw FS.
5-Reattach.
6-Unlock RSA.
7-Reattach and flash restore file
8-Customize FS.
9-Turn off phone.

Version 9.54 ready!
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Unknown phone detected.
Phone CID: 26728
Phone color: Unknown
Use testpoint to boot the phone!
All threads terminated.
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2000_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
Preparing to program flash...
Programming flash...
Time: 00:00:01
Flash process done.
Phone automatically detached.
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2000_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Flash manufacturer: Intel
Flash ID: 0x890D
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK
Flash file: "R5BC004_CXC1250057_GENERIC_SA.cw9sw"
Waiting for flash file to load...
Preparing to program flash...
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Initializing applet...
Baudrate = 460800Bd
Identifying firmware...
Firmware ID: prgCXC1250057_GENERIC_SA
Firmware version: R5BC004
Defeated!
Sending applet...
Programming flash...
RSA protection was set back to normal.
Time: 00:00:06
Flash process done.
Sending CS applet...
Initializing CS applet...
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
Done.
Writing CDA Version MS string...
Done.
Writing Default Article MS string...
Done.
Writing Default Version MS string...
Done.
Writing langpack string...
Done.
Writing country...
Done.
Uploading certificates...
Certificates uploaded successfuly.

Some explanation?

please see clear the above way is for These procedures are correct for flashing CID36 or brown CID49 files to red CID49 phones!

UnlockBR · 05-09-2006, 22:37

Quote:

Originally Posted by Lead

These procedures are correct for flashing CID36 or brown CID49 files to red CID49 phones. For flashing red CID49 files to red CID49 phones a different procedure is needed.

Lead please post correct procedure for RED CID49 phones. I must upgrade and change language of a W810i.

Thanks in advance,

UnlockBR

xpertzoneuk · 05-10-2006, 00:59

Quote:

Originally Posted by Lead

These procedures are correct for flashing CID36 or brown CID49 files to red CID49 phones. For flashing red CID49 files to red CID49 phones a different procedure is needed.

Hi Lead !

i got w810i , cid 49 red , i want to flash it & unlock it as well by new cruiser sw , so can u plz recomend me the best way to hanle it.

thanks

GSMSOL
UK

05-08-2006, 19:06	#1 (permalink)
zigma300 No Life Poster Join Date: Aug 2005 Age: 50 Posts: 566 Member: 175822 Status: Offline Thanks Meter: 4	safe unlock both K608 & K750i both cid 49 Plz can you give 99.99 % sure procedure for these fones. Only unlock Br Ziggy

05-08-2006, 20:10	#3 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	To unlock AND flash red CID49 phones: Attach. Unlock RSA. Reattach. Unlock. Reattach. Flash main FW and raw FS. Customize FS. Turn off phone.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
k750i problem cid 49	gsmrazvan	Cruiser Suite	9	10-01-2006 15:30
Da Vinci unlocks k608 cid 49 without TP	e-person	Cruiser Suite	17	02-04-2006 22:55
V608/K608 CID 49 with TP unlock method meldet as CID 29?!	rambo amadeus	SonyEricsson (USB-Smart)	0	01-24-2006 16:35
Safe Unlocker for V200 & S10x	LogoMan	Trident/AGERE Platform	3	08-07-2003 02:02

05-08-2006, 20:11	#4 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	To attach phone you may use Ctrl-A. To turn the phone off you may use Ctrl-O.

05-08-2006, 20:18	#5 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	These procedures are correct for flashing CID36 or brown CID49 files to red CID49 phones. For flashing red CID49 files to red CID49 phones a different procedure is needed.

05-08-2006, 20:23	#6 (permalink)
zigma300 No Life Poster Join Date: Aug 2005 Age: 50 Posts: 566 Member: 175822 Status: Offline Thanks Meter: 4	thank you master Lead i think this should be sticky because information is complete.

05-08-2006, 20:29	#7 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	The information will be extended and put to the Cruiser help file.

05-08-2006, 20:40	#8 (permalink)
Linkinsoldier Freak Poster Join Date: Mar 2006 Posts: 104 Member: 244696 Status: Offline Thanks Meter: 1	thx Mr. LEAD. You answered a lot of my questioned today! I will wait for the guide now, so you dont need to answer them along six hundret times...

05-08-2006, 20:45	#9 (permalink)
hossam_on_line Freak Poster Join Date: Mar 2005 Age: 48 Posts: 164 Member: 125482 Status: Offline Thanks Meter: 30	Mr leed i flash alot of w550 red cid 49 without unlock rsa just i convert it to browen and after i finish flahing and custmoize i convert it again to red .... and work very fine ... any proplem in this way ... ?

05-08-2006, 21:13	#10 (permalink)
Gerti No Life Poster Join Date: Apr 2005 Location: Albania Posts: 1,049 Member: 137489 Status: Offline Thanks Meter: 68	For me the safe mode for unlock this phone now is Usb-Smart,or with Setool with tespoint .

05-08-2006, 21:15	#11 (permalink)
Kashif Khan No Life Poster Join Date: Oct 2004 Location: Holland China Brazil Age: 43 Posts: 3,815 Member: 88016 Status: Offline Thanks Meter: 320	Thanx for the very useful info Lead. BR Kashif Khan

05-09-2006, 00:50	#12 (permalink)
Top Sony Junior Member Join Date: Dec 2005 Posts: 15 Member: 212933 Status: Offline Thanks Meter: 4	This sequence has not worked, I have proven several times without success: Flashing red CID49 phones: 1-Attach. 2-Unlock RSA. 3-Reattach. 4-Flash main FW and raw FS. 5-Customize FS. 6-Turn off phone. ------------------------------ I obtained success with this sequence: 1-Attach. 2-Unlock RSA. 3-Reattach. 4-Flash main FW and raw FS. 5-Reattach. 6-Unlock RSA. 7-Reattach and flash restore file 8-Customize FS. 9-Turn off phone. Version 9.54 ready! Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x7100 Protocol version: 3.1 Baudrate = 460800Bd Unknown phone detected. Phone CID: 26728 Phone color: Unknown Use testpoint to boot the phone! All threads terminated. Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x7100 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2000_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Flash manufacturer: Intel Flash ID: 0x890D OTP Security Level: 1 (Retail) OTP CID: 49 Sending applet... RSA protection state cannot be determined for this CID. Phone hardware initialized OK Preparing to program flash... Programming flash... Time: 00:00:01 Flash process done. Phone automatically detached. Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x7100 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2000_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Flash manufacturer: Intel Flash ID: 0x890D OTP Security Level: 1 (Retail) OTP CID: 49 Sending applet... RSA protection state cannot be determined for this CID. Phone hardware initialized OK Flash file: "R5BC004_CXC1250057_GENERIC_SA.cw9sw" Waiting for flash file to load... Preparing to program flash... Defeating RSA protection... Waiting for the phone to turn off... Should the communication hang, reinsert battery. Baudrate = 460800Bd Sending applet prologue... Sending applet body... Waiting for acknowledge... Initializing applet... Baudrate = 460800Bd Identifying firmware... Firmware ID: prgCXC1250057_GENERIC_SA Firmware version: R5BC004 Defeated! Sending applet... Programming flash... RSA protection was set back to normal. Time: 00:00:06 Flash process done. Sending CS applet... Initializing CS applet... Starting up GDFS service... Starting up filesystem, please wait... Building customization... Customizing phone... Done. Writing CDA Article MS string... Done. Writing CDA Version MS string... Done. Writing Default Article MS string... Done. Writing Default Version MS string... Done. Writing langpack string... Done. Writing country... Done. Uploading certificates... Certificates uploaded successfuly. Some explanation?