T610 Restarts - GSM-Forum

vicky_ocean · 12-07-2005, 06:07

Hi,

i have a T610 which keeps on restarting itself after unlocking, does any one have the solution for this

Firmware: T610 EU2 R6C005 [CXC125566]

please let me know which files to use.

Best Regards,
Nischal Ram

muppet · 12-07-2005, 06:36

flash the correct ARM to the phone as well

T610 has two parts, AVR and ARM. No doubt you flashed AVR and didn't bother to flash ARM to the same version.

taihv · 12-07-2005, 10:01

Sometimes flashing cannot help! In this case, if flashing cannot fix ur problem then maybe ur AVR flash chip damaged, i solved many T610 and T630 with reball or change AVR flash chip!

B.R.

vicky_ocean · 12-07-2005, 10:43

hi

thank you for you replies, well flashing did worked out, i got the files from
http://www.i-phonenetwork.org/blaaF0...RSA/T610_T618/

but now i have another problem, when i tried to switch on the phone about three hours after that it cant switched on, i dnt now what is the problem and now when i try to connect to cruiser it gets stuck on 10% and still says Bypassing authority check...,

i'm attching the picture of the software, and thank you guys for helping me, i also found your answer on

http:///vbb/showth...=t610+restarts and i also tried to find the answer for this problem and i only found this http:///vbb/showth...uthority+check

please let me know if you have any solution

Best Regards,
Nischal Ram

issam_isl · 12-07-2005, 11:48

try remove the battery and put it back after about 1 minute

vicky_ocean · 12-07-2005, 12:33

i have encounted another problem and this phone is really bugging me now, hope some one can help me out,

i was able to slove my first twomo problem but now i have another problem and i'm sending the picture of it

i try to connect the phone but all it say is

Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x5B08
Protocol version: 2.1
Trying CID29 applet...
Sending applet prologue...
Sending applet body...
RSA protection feature ACTIVE.
Time spent entering bootstrap: 3s
Initializing phone hardware...
All threads terminated.

could some one help me to attach the phone?

excel service · 05-26-2006, 13:45

y have same probleme like you vicky_ocean

but with usf no probleme toch flash but stil restaart

lwilson · 05-26-2006, 20:59

Change moderm flash chips, which No. is M36DR432A, then flash the phone again, 100% ok, because I fix many many.

lwilson · 05-26-2006, 21:04

Everytime u want to check this problem, u can press >*<<*<* without sim, if u can read the firmware version that mean maybe u can fix it with software, but if u can't read it then u need to change the chips like above I said.

12-07-2005, 06:07	#1 (permalink)
vicky_ocean Crazy Poster Join Date: Oct 2004 Location: Fiji Age: 38 Posts: 59 Member: 86871 Status: Offline Thanks Meter: 0	T610 Restarts Hi, i have a T610 which keeps on restarting itself after unlocking, does any one have the solution for this Firmware: T610 EU2 R6C005 [CXC125566] please let me know which files to use. Best Regards, Nischal Ram

05-26-2006, 13:45	#7 (permalink)
excel service Freak Poster Join Date: Mar 2005 Location: tunisia / belgium Age: 46 Posts: 218 Member: 123433 Status: Offline Thanks Meter: 14	re y have same probleme like you vicky_ocean but with usf no probleme toch flash but stil restaart

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
t610 restarts after rsa removal	gorgans	Cruiser Suite	29	04-18-2007 14:31
T610 restart whene finding network	gsmspace	Sony Ericsson Hardware Repair	7	12-09-2005 15:01
sony ericson T610 restarting	Nasmi	UFS2 + UFS3-Tornadoflasher	2	02-10-2005 07:49
T610 Restarts each 30 sec.. Already reflashed & Reflowed	Uvedovle	Sony Ericsson	20	08-02-2004 10:03
T610 restarts, then freezes on disconnect call	Blartiartfast	Sony Ericsson Hardware Repair	4	06-17-2004 23:41

12-07-2005, 06:36	#2 (permalink)
muppet No Life Poster Join Date: Oct 2003 Location: Auckland, New Zealand Posts: 3,034 Member: 42570 Status: Offline Thanks Meter: 11	flash the correct ARM to the phone as well T610 has two parts, AVR and ARM. No doubt you flashed AVR and didn't bother to flash ARM to the same version.

12-07-2005, 10:01	#3 (permalink)
taihv Registered User Join Date: Oct 2003 Location: Vietnam Age: 47 Posts: 963 Member: 40808 Status: Offline Thanks Meter: 10	Sometimes flashing cannot help! In this case, if flashing cannot fix ur problem then maybe ur AVR flash chip damaged, i solved many T610 and T630 with reball or change AVR flash chip! B.R.

12-07-2005, 11:48	#5 (permalink)
issam_isl Junior Member Join Date: Dec 2005 Posts: 8 Member: 204617 Status: Offline Thanks Meter: 0	try remove the battery and put it back after about 1 minute

05-26-2006, 20:59	#8 (permalink)
lwilson Freak Poster Join Date: Aug 2005 Posts: 105 Member: 171283 Status: Offline Thanks Meter: 2	Change moderm flash chips, which No. is M36DR432A, then flash the phone again, 100% ok, because I fix many many.

05-26-2006, 21:04	#9 (permalink)
lwilson Freak Poster Join Date: Aug 2005 Posts: 105 Member: 171283 Status: Offline Thanks Meter: 2	Everytime u want to check this problem, u can press ><<<* without sim, if u can read the firmware version that mean maybe u can fix it with software, but if u can't read it then u need to change the chips like above I said.