t610 restarts after rsa removal - GSM-Forum

gorgans · 11-29-2004, 18:51

i unlocked a t610 sw ver T610 EU2 R6C005 [CXC125566] after removing rsa and writing new security zone flash with T610 EU7 R3B011 [CXC125598] . now phone boots then restarts over and over. how do i fix this?

YamahaR1 · 11-29-2004, 19:02

Use Terminator and no problem.

gorgans · 11-29-2004, 19:54

Quote:

Originally Posted by YamahaR1

Use Terminator and no problem.

how do i fix problem with terminator?

YamahaR1 · 11-29-2004, 20:00

Remove RSA. Remove locks SP, USER what ever. Flash phone.
And it will work, did 100s.
Upload T610_Original_GDFS_area.gdf
And T610 Default Acoustics(T610 to T616)version 1.gdf
And T610 Default_Phone_Identifier.gdf

Gorden · 11-29-2004, 23:06

i cannot really understand why someone with a fighter should "repair" his phone with terminator dongle! how´s the solution with fighter? there must be one!
otherwise i would be really disappointed! :-)

gorden

gorgans · 11-29-2004, 23:37

i don't have any flash file for terminator . is there any way to repair this phone with fighter? i also flash phone with T610 EU2 R6C005 [CXC125566] full flash but phone is always restarting.

muppet · 11-30-2004, 00:16

Quote:

Originally Posted by gorgans

i don't have any flash file for terminator . is there any way to repair this phone with fighter? i also flash phone with T610 EU2 R6C005 [CXC125566] full flash but phone is always restarting.

Did you flash the ARM to R6C005 as well?

gorgans · 11-30-2004, 01:00

Quote:

Originally Posted by muppet

Did you flash the ARM to R6C005 as well?

no i did not flash arm to R6C005 i only flash avr R6C005.

muppet · 11-30-2004, 01:30

Then flash the ARM as well!!!
If you don't have matching AVR/ARM versions, the phone will restart like you've posted.

Ignore YamahaR1's blabberings about using Div. Use Div only if you don't want your phone to work again.

balal_boss · 11-30-2004, 02:33

Quote:

Originally Posted by muppet

Did you flash the ARM to R6C005 as well?

yes you must flash arm

thanks muppet

gorgans · 11-30-2004, 05:49

i am trying to flash arm but get error at 60%. why do i get this error when trying to flash arm of phone and it always stops at 60%.

Flash file: "T610_TAE_Standard_CXC125562_R6C005.ARM.flp"
Waiting for flash file to load...
Sending ARM init applet...
Sending ARM flash applet...

muppet · 11-30-2004, 06:25

Quote:

Originally Posted by gorgans

i am trying to flash arm but get error at 60%. why do i get this error when trying to flash arm of phone and it always stops at 60%.

Flash file: "T610_TAE_Standard_CXC125562_R6C005.ARM.flp"
Waiting for flash file to load...
Sending ARM init applet...
Sending ARM flash applet...

Make sure the contacts on the bottom of your phone are clean. Get and old toothbrush and give them a scrub if they're not shiny and clean.

I have seen this problem once or twice after flashing AVR, try detaching and reattaching the phone, then flashing ARM (sometimes Fighter has problems if you've just flashed AVR, though I've only seen it with T68i's)

It's not actually flashing 60% of the ARM at all, it's 60% of trying to get the phone ready for ARM flashing and that's what's failing.

balal_boss · 11-30-2004, 06:30

ok u want dowengread ver R4C003and after repier 4 locks closed your phone ok

gorgans · 11-30-2004, 12:31

Quote:

Originally Posted by muppet

Make sure the contacts on the bottom of your phone are clean. Get and old toothbrush and give them a scrub if they're not shiny and clean.

I have seen this problem once or twice after flashing AVR, try detaching and reattaching the phone, then flashing ARM (sometimes Fighter has problems if you've just flashed AVR, though I've only seen it with T68i's)

It's not actually flashing 60% of the ARM at all, it's 60% of trying to get the phone ready for ARM flashing and that's what's failing.

i cleaned contacts removed battery but no luck same problem when trying to flash arm. any other susestions?

Waiting for flash file to load...
Sending ARM init applet...
Sending ARM flash applet...

gorgans · 11-30-2004, 14:33

i finall got arm to flash by upgrading from 4.30 to 4.31 but phone still restarts. can any R6C005 arm file work? this is what i used.

Firmware: T610 EU2 R6C005 [CXC125566]
Flash file: "T610_TAE_Standard_CXC125562_R6C005.ARM.flp"

11-29-2004, 18:51	#1 (permalink)
gorgans No Life Poster Join Date: May 2003 Location: Jamaica Posts: 1,967 Member: 28559 Status: Offline Thanks Meter: 85	t610 restarts after rsa removal i unlocked a t610 sw ver T610 EU2 R6C005 [CXC125566] after removing rsa and writing new security zone flash with T610 EU7 R3B011 [CXC125598] . now phone boots then restarts over and over. how do i fix this?

11-29-2004, 23:37	#6 (permalink)
gorgans No Life Poster Join Date: May 2003 Location: Jamaica Posts: 1,967 Member: 28559 Status: Offline Thanks Meter: 85	i don't have any flash file for terminator . is there any way to repair this phone with fighter? i also flash phone with T610 EU2 R6C005 [CXC125566] full flash but phone is always restarting. Last edited by gorgans; 11-29-2004 at 23:49.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
P910 Dead after RSA Removal..Plz Help!	Nokia man	Sony Ericsson	49	11-23-2006 14:49
T610 dead after RSA	BMobile	Sony Ericsson	4	09-20-2005 02:53
t610 restarting after removal of rsa	gbada	Sony Ericsson	8	03-19-2005 18:47
T630 dead after RSA remove	xelo	Sony Ericsson	14	10-07-2004 14:41
cant flash t630 after RSA remove	xelo	Sony Ericsson	3	10-01-2004 14:22

11-29-2004, 19:02	#2 (permalink)
YamahaR1 Freak Poster Join Date: Feb 2002 Location: I am outside your house, I am armed Age: 56 Posts: 482 Member: 9698 Status: Offline Thanks Meter: 0	Use Terminator and no problem.

11-29-2004, 20:00	#4 (permalink)
YamahaR1 Freak Poster Join Date: Feb 2002 Location: I am outside your house, I am armed Age: 56 Posts: 482 Member: 9698 Status: Offline Thanks Meter: 0	Remove RSA. Remove locks SP, USER what ever. Flash phone. And it will work, did 100s. Upload T610_Original_GDFS_area.gdf And T610 Default Acoustics(T610 to T616)version 1.gdf And T610 Default_Phone_Identifier.gdf

11-29-2004, 23:06	#5 (permalink)
Gorden Freak Poster Join Date: Dec 2003 Location: Bavaria Age: 51 Posts: 177 Member: 47371 Status: Offline Thanks Meter: 1	i cannot really understand why someone with a fighter should "repair" his phone with terminator dongle! how´s the solution with fighter? there must be one! otherwise i would be really disappointed! :-) gorden

11-30-2004, 01:30	#9 (permalink)
muppet No Life Poster Join Date: Oct 2003 Location: Auckland, New Zealand Posts: 3,034 Member: 42570 Status: Offline Thanks Meter: 11	Then flash the ARM as well!!! If you don't have matching AVR/ARM versions, the phone will restart like you've posted. Ignore YamahaR1's blabberings about using Div. Use Div only if you don't want your phone to work again.

11-30-2004, 05:49	#11 (permalink)
gorgans No Life Poster Join Date: May 2003 Location: Jamaica Posts: 1,967 Member: 28559 Status: Offline Thanks Meter: 85	i am trying to flash arm but get error at 60%. why do i get this error when trying to flash arm of phone and it always stops at 60%. Flash file: "T610_TAE_Standard_CXC125562_R6C005.ARM.flp" Waiting for flash file to load... Sending ARM init applet... Sending ARM flash applet...

11-30-2004, 06:30	#13 (permalink)
balal_boss Freak Poster Join Date: Apr 2004 Location: all world Posts: 190 Member: 61743 Status: Offline Thanks Meter: 11	ok u want dowengread ver R4C003and after repier 4 locks closed your phone ok

11-30-2004, 14:33	#15 (permalink)
gorgans No Life Poster Join Date: May 2003 Location: Jamaica Posts: 1,967 Member: 28559 Status: Offline Thanks Meter: 85	i finall got arm to flash by upgrading from 4.30 to 4.31 but phone still restarts. can any R6C005 arm file work? this is what i used. Firmware: T610 EU2 R6C005 [CXC125566] Flash file: "T610_TAE_Standard_CXC125562_R6C005.ARM.flp"