t630 Imei Changing - GSM-Forum

yuval44 · 03-23-2007, 10:55

hi frends
i have t630 and i want to Changing Imei
i use cruiser. but when i try to read the phone the soft option ( flash ; unlock ..... ) not open and i need to press again the " Attach to Phone " option

this is what the soft writ

can somebody help
big thanks yuval

System diagnostics passed.
Version 10.36 ready!

[ --- Attach to Phone --- ]
Connecting via Simple Serial Cable (NTZ112311)...
Power on the phone, please!
Baseband chip ID: 0x5B08
Protocol version: 2.1
Booting via ROM...
Trying CID29 applet...
Sending applet prologue...
Sending applet body...
RSA protection feature ACTIVE.
Time spent entering bootstrap: 3s
Initializing phone hardware...
Terminating threads...
All threads terminated.

yuval44 · 03-23-2007, 11:48

i use new cruiser box .....

yuval44 · 03-23-2007, 11:49

plz help...........................

cruiserloginfo · 03-23-2007, 13:36

please use latest software version 10.39.

· Turn off the phone and attach Cruiser to the phone.

· Go to the Security AVR page of the Control Window.

· You may change any of the AVR security zone parameters. These include: phone IMEI, network unlocking codes, network code, number of unlocking attempts, frequency bandlock and a few other options.

· Ensure yourself the option Directly write to GDFS is checked (otherwise an MDC file would be created instead of direct writing to GDFS).

· Press the Create security zone button.

· Detach the phone by clicking the Finalize GDFS button in the GDFS page of Control Window, removing the battery from the phone and disconnecting the phone from cable.

the above procedure is written in cruiser manual. please read through cruiser manual to learn more.

yuval44 · 03-23-2007, 16:24

thanks but i cant Go to the Security AVR page of the Control Window

Mounir · 03-23-2007, 16:47

i think you can not changing imei with cruiser
because i have this probleme too when i open security avr i see nothing for imei

yuval44 · 03-23-2007, 19:34

but when i try to read the phone the soft option ( flash ; unlock ..... ) not open and i need to press again the " Attach to Phone " option

yuval44 · 03-23-2007, 20:05

take a look..............

oldcoyoteinc · 03-24-2007, 11:51

select recovery boot, autodetect CID THEN attach the phone

yuval44 · 03-24-2007, 12:27

thanks oldcoyoteinc it work
big big tanks

oldcoyoteinc · 03-24-2007, 13:33

u r welcome

B.R.

yuval44 · 03-24-2007, 15:30

the problem cam back why ?
my log
support cruiser plz help

System diagnostics passed.
Version 10.39 ready!

[ --- Attach to Phone --- ]
Connecting via Simple Serial Cable (NTZ112311)...
Power on the phone, please!
Baseband chip ID: 0x5B08
Protocol version: 2.1
Booting via ROM...
Trying CID29 applet...
Sending applet prologue...
Sending applet body...
RSA protection feature ACTIVE.

yuval44 · 03-25-2007, 22:21

Hi frends my name is yuval !!! and
I just want to say big big thanks to this member the clash
He give me attitude and help of professional
And he don’t leave me until I solve my problem

I am really appraisat him

And again big big thanks to the clash

yuval

03-23-2007, 10:55	#1 (permalink)
yuval44 Freak Poster Join Date: Feb 2005 Location: israel Age: 48 Posts: 422 Member: 116078 Status: Offline Thanks Meter: 17	t630 Imei Changing hi frends i have t630 and i want to Changing Imei i use cruiser. but when i try to read the phone the soft option ( flash ; unlock ..... ) not open and i need to press again the " Attach to Phone " option this is what the soft writ can somebody help big thanks yuval System diagnostics passed. Version 10.36 ready! [ --- Attach to Phone --- ] Connecting via Simple Serial Cable (NTZ112311)... Power on the phone, please! Baseband chip ID: 0x5B08 Protocol version: 2.1 Booting via ROM... Trying CID29 applet... Sending applet prologue... Sending applet body... RSA protection feature ACTIVE. Time spent entering bootstrap: 3s Initializing phone hardware... Terminating threads... All threads terminated.

03-23-2007, 19:34	#7 (permalink)
yuval44 Freak Poster Join Date: Feb 2005 Location: israel Age: 48 Posts: 422 Member: 116078 Status: Offline Thanks Meter: 17	but when i try to read the phone the soft option ( flash ; unlock ..... ) not open and i need to press again the " Attach to Phone " option Last edited by yuval44; 03-23-2007 at 19:54.

03-25-2007, 22:21	#13 (permalink)
yuval44 Freak Poster Join Date: Feb 2005 Location: israel Age: 48 Posts: 422 Member: 116078 Status: Offline Thanks Meter: 17	big big thanks to this member Hi frends my name is yuval !!! and I just want to say big big thanks to this member the clash He give me attitude and help of professional And he don’t leave me until I solve my problem I am really appraisat him And again big big thanks to the clash yuval

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Sony Ericsson T630 IMEI Change	spinner	Sony Ericsson	15	04-03-2006 05:18
t630 imei change	osmanabu	Sony Ericsson	0	11-24-2005 22:37
T610/t630 Imei Changing	marici24	Sony Ericsson	4	11-18-2005 15:59
t630 imei change	redboxtechnolog	Cruiser Suite	3	03-12-2004 08:50
t630 imei changing	whizkidmobiles	Sony Ericsson	0	03-11-2004 03:11

03-23-2007, 11:48	#2 (permalink)
yuval44 Freak Poster Join Date: Feb 2005 Location: israel Age: 48 Posts: 422 Member: 116078 Status: Offline Thanks Meter: 17	i use new cruiser box .....

03-23-2007, 11:49	#3 (permalink)
yuval44 Freak Poster Join Date: Feb 2005 Location: israel Age: 48 Posts: 422 Member: 116078 Status: Offline Thanks Meter: 17	plz help...........................

03-23-2007, 13:36	#4 (permalink)
cruiserloginfo Freak Poster Join Date: Nov 2006 Location: www.cruiserlogserver.com Posts: 175 Member: 383021 Status: Offline Thanks Meter: 5	please use latest software version 10.39. · Turn off the phone and attach Cruiser to the phone. · Go to the Security AVR page of the Control Window. · You may change any of the AVR security zone parameters. These include: phone IMEI, network unlocking codes, network code, number of unlocking attempts, frequency bandlock and a few other options. · Ensure yourself the option Directly write to GDFS is checked (otherwise an MDC file would be created instead of direct writing to GDFS). · Press the Create security zone button. · Detach the phone by clicking the Finalize GDFS button in the GDFS page of Control Window, removing the battery from the phone and disconnecting the phone from cable. the above procedure is written in cruiser manual. please read through cruiser manual to learn more.

03-23-2007, 16:24	#5 (permalink)
yuval44 Freak Poster Join Date: Feb 2005 Location: israel Age: 48 Posts: 422 Member: 116078 Status: Offline Thanks Meter: 17	thanks but i cant Go to the Security AVR page of the Control Window

03-23-2007, 16:47	#6 (permalink)
Mounir No Life Poster Join Date: Mar 2004 Location: Berkane to netherland Age: 48 Posts: 978 Member: 58969 Status: Offline Thanks Meter: 56	i think you can not changing imei with cruiser because i have this probleme too when i open security avr i see nothing for imei

03-24-2007, 11:51	#9 (permalink)
oldcoyoteinc Freak Poster Join Date: Nov 2005 Location: Tukiye/izmir Age: 39 Posts: 466 Member: 204211 Status: Offline Thanks Meter: 41	select recovery boot, autodetect CID THEN attach the phone

03-24-2007, 12:27	#10 (permalink)
yuval44 Freak Poster Join Date: Feb 2005 Location: israel Age: 48 Posts: 422 Member: 116078 Status: Offline Thanks Meter: 17	thanks oldcoyoteinc it work big big tanks

03-24-2007, 13:33	#11 (permalink)
oldcoyoteinc Freak Poster Join Date: Nov 2005 Location: Tukiye/izmir Age: 39 Posts: 466 Member: 204211 Status: Offline Thanks Meter: 41	u r welcome B.R.

03-24-2007, 15:30	#12 (permalink)
yuval44 Freak Poster Join Date: Feb 2005 Location: israel Age: 48 Posts: 422 Member: 116078 Status: Offline Thanks Meter: 17	the problem cam back why ? my log support cruiser plz help System diagnostics passed. Version 10.39 ready! [ --- Attach to Phone --- ] Connecting via Simple Serial Cable (NTZ112311)... Power on the phone, please! Baseband chip ID: 0x5B08 Protocol version: 2.1 Booting via ROM... Trying CID29 applet... Sending applet prologue... Sending applet body... RSA protection feature ACTIVE.