W700i succesfully flashed but hangs at "please wait" screen - GSM-Forum

MC Harami · 08-01-2006, 00:23

I have just flashed a W700i both parts and i ticked the option when it says customize fs after flash.
It went through ok but now wheni switch it on it says please wait like normal but stays like that for ages.
I have unlocked the RSA and restore firmware but still nothing!
System diagnostics passed.
Version 9.74 ready!

[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
Flash manufacturer: ST Microelectronics
Flash ID: 0x200D
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
Applet ID: 050909 1014 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2A
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Main Firmware --- ]
Flash file: "W700i_CXC1250514_EU1_R1CA021_Red49.cw7sw"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
Programming flash...
Time: 00:03:54
Flash process done.

[ --- Customize File System --- ]
Baudrate = 460800Bd
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...

[ --- Detach Phone --- ]
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
Flash manufacturer: ST Microelectronics
Flash ID: 0x200D
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
Applet ID: 050909 1014 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2A
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Unlock RSA --- ]
Preparing to program flash...
Baudrate = 921600Bd
Programming flash...
Time: 00:00:00
Flash process done.
Phone automatically detached.

[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...

[ --- Detach Phone --- ]
All threads terminated.

[ --- Attach to Phone --- ]
Connecting via UC-10 Universal Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H
Flash manufacturer: ST Microelectronics
Flash ID: 0x200D
OTP Security Level: 1 (Retail)
OTP CID: 49
Sending applet...
Applet ID: 050909 1014 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2A
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Restore Firmware --- ]
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_SEMC R1D
Initializing applet...
Baudrate = 460800Bd
Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_SEMC R1D
Identifying firmware...
Firmware ID: prgCXC1250514_EU_1_CR
Firmware version: R1CA021
Defeated!
Sending applet...
Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER_R1A
Sending applet...
Applet ID: 060222 0202 CRUCXC1250166_1_SEMC_COMPACTPRODUCTION NAN
Searching for FW restoral file...
File name: R1CA021_CXC1250514_EU_1_CR.cw7sw
FW restoral file found.
Preparing to program flash...
Baudrate = 921600Bd
Programming flash...
RSA protection was set back to normal.
Time: 00:00:02
Flash process done.

[ --- Flash Raw File System --- ]
Flash file: "W700i_CXC1250522_Europe1_R1CA021_Red49.cw7fs"
Waiting for flash file to load...
Preparing to program flash...
Programming flash...
Time: 00:01:56
Flash process done.

[ --- Customize File System --- ]
Sending CS applet...
The applet ignored baudrate change request!
Applet ID: 060118 0312 CRUCXC1327364_COMPACT_SEMC_CS_LOADER__V23
Initializing CS applet...
Applet ID: 060118 0312 CRUCXC1327364_COMPACT_SEMC_CS_LOADER__V23
Baudrate = 921600Bd
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
Done.
Writing CDA Version MS string...
Done.
Writing Default Article MS string...
Done.
Writing Default Version MS string...
Done.
Writing langpack string...
Done.
Writing country...
Done.
Uploading certificates...
Certificates uploaded successfuly.

[ --- Shutdown File System --- ]
Turning off phone...
GDFS access terminated.
Phone automatically detached.

sources · 08-01-2006, 05:07

try use setool to flash, unlock/repair...Gooodluck

devika · 08-01-2006, 05:18

try with usb smart repair option ......................it will ok

**.::Gsmdenis::.** · 08-01-2006, 06:36

check ur flash files

BR.,

Denis

MC Harami · 08-01-2006, 09:15

Quote:

Originally Posted by .::Gsmdenis::.

check ur flash files

BR.,

Denis

what do u reckon i should select??
I dont have any other tool yet still waiting on my SE tool

Irfangk786 · 08-01-2006, 10:23

What was the problem with phone why u flashed it?I didnt see w700i befor,But I face this problem on k750i.So I remove memory card.Because k750i's memory cards pins was short.Try to remove memory card then try to one it if it has memory card.

gsmservices · 08-01-2006, 11:53

just simply unlock it will work 100 %

barhoomh · 08-01-2006, 12:22

restore firmware
br

MC Harami · 08-02-2006, 00:26

i have unlocked it and restored firmware but still nothing! Any other suggestions?

rzmadjid2 · 08-02-2006, 02:10

Quote:

Originally Posted by MC Harami

i have unlocked it and restored firmware but still nothing! Any other suggestions?

just reflash raw fs and do customise fs and don't click on shutdown fs just detach phone
post result

MC Harami · 08-02-2006, 10:44

Quote:

Originally Posted by rzmadjid2

just reflash raw fs and do customise fs and don't click on shutdown fs just detach phone
post result

I have tried to do this with another raw fs file but when it gets to customization the phone turns on and i get error in cruiser!

Cure-IT · 08-02-2006, 11:18

flash main ARM flash again, then check the box for CUSTOMISE FS and flash the FS after. this will complete the fone and will boot up no problem. If no joy may need to read GDFS of another w700 and write it into the main ARM FLASH. or download GDFS for that model from Cruiser and write it in to ARM FLASH. Then repeat from above with the CUSTOMISE FS BOX AND FLASHING

tersace · 08-02-2006, 11:19

Hi

I have flashed 2 phones with the following files, they work perfect.

W700i_CXC1250514_EU1_R1CA021_Red49.cw7sw
W700i_CXC1250522_Europe1_R1CA021_Red49.cw7fs

1. Unlock RSA
2. Unlock Phone
3. Flash Files
4. Customize
5. Shutdown FS

It should work for you.

Good Luck

MC Harami · 08-02-2006, 11:39

I have just done a direct unlock and it boots fine. Now i have configuration error!

tersace · 08-02-2006, 11:41

Quote:

Originally Posted by MC Harami

I have just done a direct unlock and it boots fine. Now i have configuration error!

Customize FS, then shut down

08-01-2006, 00:23	#1 (permalink)
MC Harami No Life Poster Join Date: Jan 2004 Location: Peh Bhooti, Pakistan Age: 41 Posts: 673 Member: 49896 Status: Offline Thanks Meter: 14	W700i succesfully flashed but hangs at "please wait" screen I have just flashed a W700i both parts and i ticked the option when it says customize fs after flash. It went through ok but now wheni switch it on it says please wait like normal but stays like that for ages. I have unlocked the RSA and restore firmware but still nothing! System diagnostics passed. Version 9.74 ready! [ --- Attach to Phone --- ] Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2010_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H Flash manufacturer: ST Microelectronics Flash ID: 0x200D OTP Security Level: 1 (Retail) OTP CID: 49 Sending applet... Applet ID: 050909 1014 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2A RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Flash Main Firmware --- ] Flash file: "W700i_CXC1250514_EU1_R1CA021_Red49.cw7sw" Waiting for flash file to load... Preparing to program flash... Baudrate = 921600Bd Programming flash... Time: 00:03:54 Flash process done. [ --- Customize File System --- ] Baudrate = 460800Bd Defeating RSA protection... Waiting for the phone to turn off... Should the communication hang, reinsert battery. Baudrate = 460800Bd Sending applet prologue... Sending applet body... Waiting for acknowledge... [ --- Detach Phone --- ] All threads terminated. [ --- Attach to Phone --- ] Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2010_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H Flash manufacturer: ST Microelectronics Flash ID: 0x200D OTP Security Level: 1 (Retail) OTP CID: 49 Sending applet... Applet ID: 050909 1014 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2A RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Unlock RSA --- ] Preparing to program flash... Baudrate = 921600Bd Programming flash... Time: 00:00:00 Flash process done. Phone automatically detached. [ --- Attach to Phone --- ] Connecting via UC-10 Universal Cable... Powering on the phone... [ --- Detach Phone --- ] All threads terminated. [ --- Attach to Phone --- ] Connecting via UC-10 Universal Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2010_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 060206 1814 NPACXC125872_COMPACTPRODUCTION_ID_LOADER P3H Flash manufacturer: ST Microelectronics Flash ID: 0x200D OTP Security Level: 1 (Retail) OTP CID: 49 Sending applet... Applet ID: 050909 1014 NPACXC1250165_1_SEMC_COMPACTFLASHLOADER R2A RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Restore Firmware --- ] Defeating RSA protection... Waiting for the phone to turn off... Should the communication hang, reinsert battery. Baudrate = 460800Bd Sending applet prologue... Sending applet body... Waiting for acknowledge... Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_SEMC R1D Initializing applet... Baudrate = 460800Bd Applet ID: 060514 1351 CRUCXCxxxxxx_S_LOADER_SEMC R1D Identifying firmware... Firmware ID: prgCXC1250514_EU_1_CR Firmware version: R1CA021 Defeated! Sending applet... Applet ID: 060525 0308 CRUCXCxxxxxx_PRE_LOADER_R1A Sending applet... Applet ID: 060222 0202 CRUCXC1250166_1_SEMC_COMPACTPRODUCTION NAN Searching for FW restoral file... File name: R1CA021_CXC1250514_EU_1_CR.cw7sw FW restoral file found. Preparing to program flash... Baudrate = 921600Bd Programming flash... RSA protection was set back to normal. Time: 00:00:02 Flash process done. [ --- Flash Raw File System --- ] Flash file: "W700i_CXC1250522_Europe1_R1CA021_Red49.cw7fs" Waiting for flash file to load... Preparing to program flash... Programming flash... Time: 00:01:56 Flash process done. [ --- Customize File System --- ] Sending CS applet... The applet ignored baudrate change request! Applet ID: 060118 0312 CRUCXC1327364_COMPACT_SEMC_CS_LOADER__V23 Initializing CS applet... Applet ID: 060118 0312 CRUCXC1327364_COMPACT_SEMC_CS_LOADER__V23 Baudrate = 921600Bd Starting up GDFS service... Starting up filesystem, please wait... Building customization... Customizing phone... Done. Writing CDA Article MS string... Done. Writing CDA Version MS string... Done. Writing Default Article MS string... Done. Writing Default Version MS string... Done. Writing langpack string... Done. Writing country... Done. Uploading certificates... Certificates uploaded successfuly. [ --- Shutdown File System --- ] Turning off phone... GDFS access terminated. Phone automatically detached.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
W810 hang on "Please wait"	atukhi	Sony Ericsson Hardware Repair	17	08-17-2011 11:18
Please help ! K750i with 5 locks closed and hang in "please wait"	nova75c	Cruiser Suite	9	09-16-2006 04:40
w550 w800 stop at "please wait"	mutualmobile	Sony Ericsson	10	03-22-2006 14:22
stop at "please wait"	mutualmobile	SonyEricsson (USB-Smart)	4	02-26-2006 21:55
phone stays at "please wait" after flashing	cgigate	TOTAL MultiServer	4	02-13-2006 01:25

08-01-2006, 05:07	#2 (permalink)
sources Freak Poster Join Date: Feb 2005 Age: 40 Posts: 440 Member: 117604 Status: Offline Thanks Meter: 42	try use setool to flash, unlock/repair...Gooodluck

08-01-2006, 05:18	#3 (permalink)
devika No Life Poster Join Date: Aug 2004 Location: india Age: 51 Posts: 638 Member: 78028 Status: Offline Thanks Meter: 90	try with usb smart repair option ......................it will ok

08-01-2006, 06:36	#4 (permalink)
.::Gsmdenis::. Product Manager Join Date: Aug 2002 Location: MFC Posts: 8,297 Member: 79315 Status: Offline Thanks Meter: 6,024	check ur flash files BR., Denis

08-01-2006, 10:23	#6 (permalink)
Irfangk786 No Life Poster Join Date: May 2005 Age: 44 Posts: 927 Member: 146630 Status: Offline Thanks Meter: 21	What was the problem with phone why u flashed it?I didnt see w700i befor,But I face this problem on k750i.So I remove memory card.Because k750i's memory cards pins was short.Try to remove memory card then try to one it if it has memory card.

08-01-2006, 11:53	#7 (permalink)
gsmservices No Life Poster Join Date: Dec 2004 Age: 48 Posts: 790 Member: 101827 Status: Offline Thanks Meter: 23	just simply unlock it will work 100 %

08-01-2006, 12:22	#8 (permalink)
barhoomh No Life Poster Join Date: Sep 2004 Location: in somewher in the earth Age: 43 Posts: 746 Member: 82249 Status: Offline Sonork: 100.114416 Thanks Meter: 63	restore firmware br

08-02-2006, 00:26	#9 (permalink)
MC Harami No Life Poster Join Date: Jan 2004 Location: Peh Bhooti, Pakistan Age: 41 Posts: 673 Member: 49896 Status: Offline Thanks Meter: 14	i have unlocked it and restored firmware but still nothing! Any other suggestions?

08-02-2006, 11:18	#12 (permalink)
Cure-IT Insane Poster Join Date: Aug 2006 Posts: 88 Member: 323031 Status: Offline Thanks Meter: 1	flash main ARM flash again, then check the box for CUSTOMISE FS and flash the FS after. this will complete the fone and will boot up no problem. If no joy may need to read GDFS of another w700 and write it into the main ARM FLASH. or download GDFS for that model from Cruiser and write it in to ARM FLASH. Then repeat from above with the CUSTOMISE FS BOX AND FLASHING

08-02-2006, 11:19	#13 (permalink)
tersace Freak Poster Join Date: Nov 2003 Age: 46 Posts: 379 Member: 44483 Status: Offline Thanks Meter: 4	Hi I have flashed 2 phones with the following files, they work perfect. W700i_CXC1250514_EU1_R1CA021_Red49.cw7sw W700i_CXC1250522_Europe1_R1CA021_Red49.cw7fs 1. Unlock RSA 2. Unlock Phone 3. Flash Files 4. Customize 5. Shutdown FS It should work for you. Good Luck

08-02-2006, 11:39	#14 (permalink)
MC Harami No Life Poster Join Date: Jan 2004 Location: Peh Bhooti, Pakistan Age: 41 Posts: 673 Member: 49896 Status: Offline Thanks Meter: 14	I have just done a direct unlock and it boots fine. Now i have configuration error!