W810 Dead after unlock - Page 2 - GSM-Forum

algersmehdi · 05-09-2006, 00:22

I (recovery boot cid 49) now i got this message "Invalid response
Please turn the phone off and then unlock RSA!" when i try to unlock RSA
plus the only thing i can do is flash ARM but phone is still dead
How to fix my big mistake ?

zakau · 05-09-2006, 09:34

Quote:

Originally Posted by algersmehdi

big problem after bad unlock
Please remove battery from the phone...
Remember to restore the main firmware in the end.
Unlocking RSA damages first 128/256KB of main FW in red CID49 phones.
Need Help

Quote:

I (recovery boot cid 49) now i got this message "Invalid response
Please turn the phone off and then unlock RSA!" when i try to unlock RSA
plus the only thing i can do is flash ARM but phone is still dead
How to fix my big mistake ?

My problem 's the same , now W810i still dead .

After that , I flash MAIN and FS RED CID49 file ( in the support ) all's OK ,
but when select customize FS funtion, it display error :" Invalid response
Please turn the phone off and then unlock RSA!"

Big ,big problem .

ASHIF · 05-09-2006, 14:43

Quote:

Originally Posted by zakau

My problem 's the same , now W810i still dead .

After that , I flash MAIN and FS RED CID49 file ( in the support ) all's OK ,
but when select customize FS funtion, it display error :" Invalid response
Please turn the phone off and then unlock RSA!"

Big ,big problem .

i think u forgot to flash restore file before customising fs......

juses80 · 05-10-2006, 02:40

I have the same problem .

Waiting more information about that .
Thanks

zakau · 05-10-2006, 02:46

Quote:

Originally Posted by ashifrocker

i think u forgot to flash restore file before customising fs......

No ,after flash Main and FS (before customize fs ) , i also flash Restore file :
R4CK003_CXC1250316_GENERIC_HN.cw81sw
but it got same results : error .

Quote:

Flash file: "R4CK003_CXC1250316_GENERIC_HN.cw81sw"
Waiting for flash file to load...
Preparing to program flash...
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Sending applet prologue...
Sending applet body...
Waiting for acknowledge...

Results:
Invalid response
Please turn the phone off and then unlock RSA!
Script error: Unspecified [9.54.41]

CONG YANG · 05-10-2006, 04:38

me too, but have the same problem in w900i

Fonetec · 05-10-2006, 09:42

try 115200bd should sort the problem at lower flashing speed

zigma300 · 05-10-2006, 09:47

guyz once you have flashed the fone you can not touch it anymore. RED CID 49 will not allow it. which is logical... all you have to do is unlock RSA again customize and then restore...And yes 115200bd helps

MUNEEB_AKHTAR_RAZA · 05-10-2006, 16:38

Quote:

Originally Posted by zakau

No ,after flash Main and FS (before customize fs ) , i also flash Restore file :
R4CK003_CXC1250316_GENERIC_HN.cw81sw
but it got same results : error .

Results:
Invalid response
Please turn the phone off and then unlock RSA!
Script error: Unspecified [9.54.41]

Brother me also got this problem with my w900 and me also checked the lower buadrate but still same error is still there....Me also flashed this phone for 3 times still same error....So what to do with it???Any tested procedure??
Br
Muneeb Akhtar Raza

fonecellar · 05-10-2006, 16:57

i have also had this on some applications it seems to stem for something in cid 49 not 100% supported yet as it was also in version 9.22 so wait for a further update and maybe solution

sgpstar · 05-10-2006, 17:13

Well did first W810i today, removed RSA then phone dead ARM damaged( why the warning after you have already done it?) . Anyway did Direct Unlock then flashed ARM and all ok.

ramiz janjua · 09-04-2007, 09:36

i have already w810i errom corrupted any solution please help

.:::Dr. Cell:::. · 03-19-2008, 12:56

my w810 dead after trying to flash with cruiser
it was having blinking lcd problem first.
i connected the phone
unlocked rsa
flash main fw but it stopped in the middle
now phone is not showing any option
here is the log

System diagnostics passed.
Version 13.01 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x8040
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Sony Ericsson phone detected.
Phone CID: 49
Phone color: Red
Flash certificate: A1_DB2010_49_RED
Trying Red CID49 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 060206 1814 NPACXC125872_COMPACTPRO...
Flash manufacturer: ST Microelectronics
Flash ID: 0x2019
OTP Security Level: 1 (Retail)
OTP CID: 49

Sending applet...
Terminating threads...
All threads terminated.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
help urgently G1157 dead after unlock..	razisamb	FuriousGold	4	03-29-2010 15:38
w810 CID49 dead after unlock???	evaireland	SETool2	9	07-30-2009 15:33
W810 dead after failed flash (Error flashing block at address: 0x444B0000)	Xflame	Cruiser Suite	12	12-11-2006 04:27
w810 dead after unlock	Ash121	MT-BOX	7	08-20-2006 15:03
W810 dead after failed flash	Xflame	Cruiser Suite	0	08-15-2006 14:51

05-09-2006, 00:22	#16 (permalink)
algersmehdi Freak Poster Join Date: Jun 2005 Age: 50 Posts: 123 Member: 156480 Status: Offline Thanks Meter: 4	I (recovery boot cid 49) now i got this message "Invalid response Please turn the phone off and then unlock RSA!" when i try to unlock RSA plus the only thing i can do is flash ARM but phone is still dead How to fix my big mistake ?

05-10-2006, 02:40	#19 (permalink)
juses80 Major Poster Join Date: Sep 2005 Age: 43 Posts: 40 Member: 182437 Status: Offline Thanks Meter: 1	I have the same problem . Waiting more information about that . Thanks

05-10-2006, 04:38	#21 (permalink)
CONG YANG Freak Poster Join Date: Apr 2005 Age: 45 Posts: 252 Member: 134761 Status: Offline Thanks Meter: 40	me too, but have the same problem in w900i

05-10-2006, 09:42	#22 (permalink)
Fonetec Freak Poster Join Date: Mar 2005 Location: LONDON TOWN Posts: 404 Member: 129507 Status: Offline Thanks Meter: 10	try 115200bd should sort the problem at lower flashing speed

05-10-2006, 09:47	#23 (permalink)
zigma300 No Life Poster Join Date: Aug 2005 Age: 50 Posts: 566 Member: 175822 Status: Offline Thanks Meter: 4	guyz once you have flashed the fone you can not touch it anymore. RED CID 49 will not allow it. which is logical... all you have to do is unlock RSA again customize and then restore...And yes 115200bd helps

05-10-2006, 16:57	#25 (permalink)
fonecellar No Life Poster Join Date: Jul 2004 Location: 127.0.0.1 Age: 79 Posts: 7,553 Member: 545165 Status: Offline Thanks Meter: 578	i have also had this on some applications it seems to stem for something in cid 49 not 100% supported yet as it was also in version 9.22 so wait for a further update and maybe solution

05-10-2006, 17:13	#26 (permalink)
sgpstar Freak Poster Join Date: Sep 2003 Posts: 108 Member: 38513 Status: Offline Thanks Meter: 0	Well did first W810i today, removed RSA then phone dead ARM damaged( why the warning after you have already done it?) . Anyway did Direct Unlock then flashed ARM and all ok.

09-04-2007, 09:36	#27 (permalink)
ramiz janjua Insane Poster Join Date: Mar 2007 Posts: 96 Member: 462382 Status: Offline Thanks Meter: 9	i have already w810i errom corrupted any solution please help

03-19-2008, 12:56	#28 (permalink)
.:::Dr. Cell:::. Freak Poster Join Date: Jan 2004 Location: Islamabad, Pakistan Age: 42 Posts: 295 Member: 48857 Status: Offline Thanks Meter: 31	my w810 dead after trying to flash with cruiser it was having blinking lcd problem first. i connected the phone unlocked rsa flash main fw but it stopped in the middle now phone is not showing any option here is the log System diagnostics passed. Version 13.01 ready! [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x8040 Protocol version: 3.1 Baudrate = 460800Bd Booting via ROM... Sony Ericsson phone detected. Phone CID: 49 Phone color: Red Flash certificate: A1_DB2010_49_RED Trying Red CID49 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Applet ID: 060206 1814 NPACXC125872_COMPACTPRO... Flash manufacturer: ST Microelectronics Flash ID: 0x2019 OTP Security Level: 1 (Retail) OTP CID: 49 Sending applet... Terminating threads... All threads terminated.