W830 error...? why?
 

after write gdfs with log supreme w830 is dead, fisrt before write gdfs recontruction at cid52...i try to write gdfs and unlock with se ultimate unlocker w830 had cid49 brown....the phone stiil dead
i try agan to flash with cruiser ....

System diagnostics passed.
Version 13.20 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x9900
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Trying CID53 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Applet ID: 070703 1229 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 51
Phone CID: 49
Phone color: Brown
Sending applet...
Terminating threads...
All threads terminated.

just tab flash not found

plz help me sir....how to flash it, plz ..give me solution???
thx a lot



br,


ABMedia-GSM

and i try to with flash setool same error too...

identify=

v0.915030/UNI
CARD SERIAL: 00xxxx09
Loaded 51 flash descriptors
Open COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
Flash ID check:897E
Flash props sent ok
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35457901403707 CERT:N/A
FLASH CID:49 COLOR:BROWN
no ack during gdfs_readvar !
SCRC READ FAILURE
Elapsed: 32 secs.


flash=

pen COM port OK
ChipID:9900,EMP protocol:0301
Speed:921600
OTP: LOCKED:1 CID:51 PAF:1 IMEI:35457901403707 CERT:N/A
FLASH CID:49 COLOR:BROWN
ldr_on_ldr payload error (30)
Elapsed: 3 secs.


so i try to 2 box flasher same problem too...i cant flash at all
plz help...
thx

Your main problem is with phone cid, your flash cid is lower than your otp cid, so it can't be flashed. I think if you change your flash cid with 52 or 53 your problem is solved. Use TP metode or supreme log to change your flash cid, then flash/customize your phone. (Semoga membantu)

http://ultimate.philipfotos.com/DB20..._to_Red53.a1sw

flash it to ARM and then do whatever you want.