W850i Blinking - GSM-Forum

tuhingr · 10-07-2007, 10:30

System diagnostics passed.
Version 12.10 ready!

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x9900
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 51
Phone CID: 51
Phone color: Red
Sending applet...
Applet ID: 061205 1523 HANCXC9876543210_DB2020...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Raw File System --- ]
Flash file: "W850i_CXC1250489_Baltic_R1JC002_Red51.cw85fs"
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:06:00
Flash process done.

[ --- Customize File System --- ]
Sending CS applet...
Applet ID: 070410 1557 HANCXC1250562_DB2020_CS...
Initializing CS applet...
Applet ID: 070410 1557 HANCXC1250562_DB2020_CS...
Baudrate = 921600Bd
Starting up GDFS service...
Starting up filesystem, please wait...
Building customization...
Customizing phone...
Done.
Writing CDA Article MS string...
New value: CDA102568/10
Done.
Writing CDA Version MS string...
New value: R7A
Done.
Writing Default Article MS string...
New value: cxc1250489
Done.
Writing Default Version MS string...
New value: R1KG001
Done.
Writing langpack string...
New value: EUROPE_1
Done.
Writing country...
New value: Generic Trade
Done.

[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.

[ --- Attach to Phone --- ]
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x9900
Protocol version: 3.1
Baudrate = 460800Bd
Booting via ROM...
Trying CID52 recovery applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 2s
Initializing phone hardware...
Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_...
Flash manufacturer: Intel
Flash ID: 0x897E
OTP Security Level: 1 (Retail)
OTP CID: 51
Phone CID: 51
Phone color: Red
Sending applet...
Applet ID: 061205 1523 HANCXC9876543210_DB2020...
Sending applet...
Applet ID: 061201 1314 HANCXC1329129_DB2020_FL...
RSA protection state cannot be determined for this CID.
Phone hardware initialized OK

[ --- Flash Main Firmware --- ]
Flash file: "W850i_CXC1250200_Generic_R1JC002_Red51.cw85sw "
Waiting for flash file to load...
Preparing to program flash...
Baudrate = 921600Bd
The applet ignored baudrate change request!
Programming flash...
Time: 00:11:54
Flash process done.

[ --- Turn off Phone --- ]
Turning off phone...
Phone turned off.
Phone automatically detached.

1st I search forum. I got more way.

Flsah FS
Customize
Flash SW
1st time ok after this procidure,
after some time still same problem.

Blinking....
How can i solve it?

Faisal_Computer · 10-07-2007, 15:36

did you solve ? as i said to you ?

Br

Faisal_Computer

koa · 10-07-2007, 20:15

Try to check the keypad connector. It happen to W850i most the time is the connector damage. I fixed many of this b4.

tuhingr · 10-09-2007, 13:56

My problem solved.
This is hardware problem. Change rebon then ok.

Thankx to KOA

softmaster00121 · 11-30-2007, 08:20

Quote:

Originally Posted by tuhingr

My problem solved.
This is hardware problem. Change rebon then ok.

Thankx to KOA

salam g i have w850i which is in blinking. when i power up its vibrate n show blank display for a while n off after that its began to blink for again n again untill i remove battery.Whats ur suggestions. I also flash it but resuilt is same.

tuhingr · 11-30-2007, 19:06

I solved this problem cahnged flex cable. after 2/3 days came to same problem.
Now i have w710i same problem.

wamang · 12-16-2007, 10:44

hi:

i try reconnect front keypad board and flexi cable it ok,
and now the phone can on already.

thanks for the info

aziz patel · 03-13-2008, 11:55

thankuuuuuuuuu f.c..............

vipishe · 03-13-2008, 17:27

"show blank display for a while"
Problem with flex cable or front keypad board.

ccanning2 · 01-26-2010, 14:17

Hi
I also have a w850i and my screen on start-up also blinks white and black... How and where can I fix this problem? I tried using XS ++ but it wont work, how do I flash/over write my phone so all the settings will be reset? I also used Ultimate unlocker but came up with whole lot of errors... Can anyone kindly help me thank you

10-07-2007, 10:30	#1 (permalink)
tuhingr No Life Poster Join Date: Jun 2005 Location: Chittagong, Bangladesh. Posts: 1,113 Member: 152752 Status: Offline Sonork: 100.1581661 Thanks Meter: 182	W850i Blinking System diagnostics passed. Version 12.10 ready! [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x9900 Protocol version: 3.1 Baudrate = 460800Bd Booting via ROM... Trying CID52 recovery applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 2s Initializing phone hardware... Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_... Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 51 Phone CID: 51 Phone color: Red Sending applet... Applet ID: 061205 1523 HANCXC9876543210_DB2020... Sending applet... Applet ID: 061201 1314 HANCXC1329129_DB2020_FL... RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Flash Raw File System --- ] Flash file: "W850i_CXC1250489_Baltic_R1JC002_Red51.cw85fs" Waiting for flash file to load... Preparing to program flash... Baudrate = 921600Bd The applet ignored baudrate change request! Programming flash... Time: 00:06:00 Flash process done. [ --- Customize File System --- ] Sending CS applet... Applet ID: 070410 1557 HANCXC1250562_DB2020_CS... Initializing CS applet... Applet ID: 070410 1557 HANCXC1250562_DB2020_CS... Baudrate = 921600Bd Starting up GDFS service... Starting up filesystem, please wait... Building customization... Customizing phone... Done. Writing CDA Article MS string... New value: CDA102568/10 Done. Writing CDA Version MS string... New value: R7A Done. Writing Default Article MS string... New value: cxc1250489 Done. Writing Default Version MS string... New value: R1KG001 Done. Writing langpack string... New value: EUROPE_1 Done. Writing country... New value: Generic Trade Done. [ --- Turn off Phone --- ] Turning off phone... Phone turned off. Phone automatically detached. [ --- Attach to Phone --- ] Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x9900 Protocol version: 3.1 Baudrate = 460800Bd Booting via ROM... Trying CID52 recovery applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 2s Initializing phone hardware... Applet ID: 061220 1711 NPA4_CXC1329130_DB2020_... Flash manufacturer: Intel Flash ID: 0x897E OTP Security Level: 1 (Retail) OTP CID: 51 Phone CID: 51 Phone color: Red Sending applet... Applet ID: 061205 1523 HANCXC9876543210_DB2020... Sending applet... Applet ID: 061201 1314 HANCXC1329129_DB2020_FL... RSA protection state cannot be determined for this CID. Phone hardware initialized OK [ --- Flash Main Firmware --- ] Flash file: "W850i_CXC1250200_Generic_R1JC002_Red51.cw85sw " Waiting for flash file to load... Preparing to program flash... Baudrate = 921600Bd The applet ignored baudrate change request! Programming flash... Time: 00:11:54 Flash process done. [ --- Turn off Phone --- ] Turning off phone... Phone turned off. Phone automatically detached. 1st I search forum. I got more way. Flsah FS Customize Flash SW 1st time ok after this procidure, after some time still same problem. Blinking.... How can i solve it?

12-16-2007, 10:44	#7 (permalink)
wamang Junior Member Join Date: Jul 2004 Age: 52 Posts: 4 Member: 71370 Status: Offline Thanks Meter: 0	reconect front keypadboard hi: i try reconnect front keypad board and flexi cable it ok, and now the phone can on already. thanks for the info

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
w850i blinking after flash	sumon.bd	Cruiser Suite	6	12-28-2009 16:15
w850i blinking white light	SHARMA NEERAJ	Sony Ericsson Hardware Repair	0	09-22-2009 16:13
w850i blinking...?	celldoct	Sony Ericsson Hardware Repair	3	12-08-2008 13:45
W850i Red Blinking Light.	MobilesDoctor	Universalbox	2	02-26-2007 10:21
w850i Red LED blinking - phone dead.	Mobileforce	Cruiser Suite	5	12-30-2006 23:44

10-07-2007, 15:36	#2 (permalink)
Faisal_Computer No Life Poster Join Date: Jun 2005 Location: Kamalia, Pakistan. Age: 38 Posts: 16,852 Member: 151871 Status: Offline Thanks Meter: 71,421	did you solve ? as i said to you ? Br Faisal_Computer

10-07-2007, 20:15	#3 (permalink)
koa Freak Poster Join Date: Jun 2005 Posts: 156 Member: 152974 Status: Offline Thanks Meter: 1	Try to check the keypad connector. It happen to W850i most the time is the connector damage. I fixed many of this b4.

10-09-2007, 13:56	#4 (permalink)
tuhingr No Life Poster Join Date: Jun 2005 Location: Chittagong, Bangladesh. Posts: 1,113 Member: 152752 Status: Offline Sonork: 100.1581661 Thanks Meter: 182	My problem solved. This is hardware problem. Change rebon then ok. Thankx to KOA

11-30-2007, 19:06	#6 (permalink)
tuhingr No Life Poster Join Date: Jun 2005 Location: Chittagong, Bangladesh. Posts: 1,113 Member: 152752 Status: Offline Sonork: 100.1581661 Thanks Meter: 182	I solved this problem cahnged flex cable. after 2/3 days came to same problem. Now i have w710i same problem.

03-13-2008, 11:55	#8 (permalink)
aziz patel Freak Poster Join Date: Apr 2007 Posts: 156 Member: 495989 Status: Offline Thanks Meter: 31	thankuuuuuuuuu f.c..............

03-13-2008, 17:27	#9 (permalink)
vipishe Freak Poster Join Date: Jan 2007 Posts: 168 Member: 436305 Status: Offline Thanks Meter: 8	"show blank display for a while" Problem with flex cable or front keypad board.

01-26-2010, 14:17	#10 (permalink)
ccanning2 Junior Member Join Date: Jan 2010 Posts: 1 Member: 1219474 Status: Offline Thanks Meter: 0	Hi I also have a w850i and my screen on start-up also blinks white and black... How and where can I fix this problem? I tried using XS ++ but it wont work, how do I flash/over write my phone so all the settings will be reset? I also used Ultimate unlocker but came up with whole lot of errors... Can anyone kindly help me thank you