Waiting for GDFS applet to start.. (part II) - GSM-Forum

Invisible · 01-07-2005, 11:25

hi,

I got another T610 with same problem so spent some time making test,
phone was boxed (never used), firmware R3C, I updated to R5C and after insert sim I noticed bluethooth was not working, just freezing when "activate" option choosed.
Fighter started to give "Waiting for GDFS applet to start" message and even ARM part was not able to being flashed..
Readed GDFS backup on flp not able to restore...how to restore this?
(flashing ARM with GDFS.flp not working)
I flashed with UFS, Se Tool, Div, Old fighter versions but no result..same problem, then I downgrade again to R3C, upload full GDFS, insert sim and power on and bluethooth working again.
I uploaded few things to phone, power off and leave charging arround 30 min, when I came back I connect to fighter and at first try I was able to restore gdfs_sec.mdc,

So I figure out, no cable/version problem, no battery problem since I was swapping with a full charged one, looks this problem is related to phone,
in some way phone get "locked" and refuses to run script, however this not happening with ufs..
Overwriting firmware/gdfs did not solved problem, solved after some "init" on phone, perhaps any flag/mcu state..just guessing

best regards
Invisible

btw, when ufs init security zone it creates "old layout" while fighter creates "new layout", both looks working fine

evan_silbert · 01-07-2005, 21:55

Do you think it could have to do with some ARM corruption? That seems like it would explain the bluetooth problems...

01-07-2005, 11:25	#1 (permalink)
Invisible No Life Poster Join Date: Apr 2001 Location: รำมว&# Posts: 2,461 Member: 3956 Status: Offline Sonork: galletto3 rules :D Thanks Meter: 55	Waiting for GDFS applet to start.. (part II) hi, I got another T610 with same problem so spent some time making test, phone was boxed (never used), firmware R3C, I updated to R5C and after insert sim I noticed bluethooth was not working, just freezing when "activate" option choosed. Fighter started to give "Waiting for GDFS applet to start" message and even ARM part was not able to being flashed.. Readed GDFS backup on flp not able to restore...how to restore this? (flashing ARM with GDFS.flp not working) I flashed with UFS, Se Tool, Div, Old fighter versions but no result..same problem, then I downgrade again to R3C, upload full GDFS, insert sim and power on and bluethooth working again. I uploaded few things to phone, power off and leave charging arround 30 min, when I came back I connect to fighter and at first try I was able to restore gdfs_sec.mdc, So I figure out, no cable/version problem, no battery problem since I was swapping with a full charged one, looks this problem is related to phone, in some way phone get "locked" and refuses to run script, however this not happening with ufs.. Overwriting firmware/gdfs did not solved problem, solved after some "init" on phone, perhaps any flag/mcu state..just guessing best regards Invisible btw, when ufs init security zone it creates "old layout" while fighter creates "new layout", both looks working fine

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Waiting for eexplications how to moove old credits on new server.	decoder5000	FuriouS II	2	02-03-2005 04:54
Waiting for GDFS applet to start..	Invisible	Cruiser Suite	21	01-04-2005 17:13

01-07-2005, 21:55	#2 (permalink)
evan_silbert No Life Poster Join Date: Feb 2003 Location: Boston Posts: 5,027 Member: 21920 Status: Offline Thanks Meter: 10	Do you think it could have to do with some ARM corruption? That seems like it would explain the bluetooth problems...