Z1010 cid16 flashed with cid29 - GSM-Forum

Nic · 05-26-2005, 19:14

Hello

Does anyone have any idea of what to do when a z1010 r1h015 cid16 was flashed, accidentaly, with r1k010 cid29?

However, I don't know if it is the cause or not but the real problem is when flashing the r1k010 cid 16 it stops every time at 63% regardless of flashspeed.
Even tried with the r1k010 EU6 and 3 files but still the same result. Flash error at 63%....

I get Error flashing block at address: 0x21280000
and Script error: flash error [3.82.66]

With Cruiser v3.70 I get this instead
Error flashing block at address: 0x2129000
Script error: flash error [3.70 gamma.61]

Any help appreciated here

//Niclas

arash · 05-26-2005, 19:36

as i have seen on website, cross-cid flashing is supported ..

''Full support for cross-CID flashing. It is possible to flash CID16, CID17 and CID29 phones by any-CID flashes''

Nic · 05-26-2005, 19:41

Howdy

Hmmm... then I can't see the harm in doing that, completing the flashing of the cid29 files then... I'll try that and get back.

//Niclas

EDIT:

Tried with cid29 files and the very same result.

gbrooks3 · 05-26-2005, 20:35

Try and flash the phone with a 'Z' recovery file in support area, then do full reflash.

Nic · 05-27-2005, 17:21

Hi again, I tried with a 3G recovery file from support but no change in error at 63%. Will try with the Z if there is any difference or not.

//Niclas

Jani-Jan · 05-27-2005, 21:52

Quote:

Originally Posted by Nic

Hi again, I tried with a 3G recovery file from support but no change in error at 63%. Will try with the Z if there is any difference or not.

//Niclas

dear which cause you need to flash phone???

Nic · 05-28-2005, 18:06

@Jani-Jan

Which cause I need to flash phone???

If you do not have anything new to come up with then I suggest that you do not reply with such nonsense questions just in order to get your posts number increased.

There might be several reasons for me to flash the phone. One is like everyone else to upgrade the phone if you haven't heard of such before.

Back to the issue again.
I do suspect a hardware fault in the flash IC and will send this Z1010 back to SE for warranty service.
Unless someone else has any idea of what to do with it.

//Niclas

05-26-2005, 19:14	#1 (permalink)
Nic Freak Poster Join Date: Aug 2003 Location: Sweden Age: 50 Posts: 273 Member: 36361 Status: Offline Thanks Meter: 0	Z1010 cid16 flashed with cid29 Hello Does anyone have any idea of what to do when a z1010 r1h015 cid16 was flashed, accidentaly, with r1k010 cid29? However, I don't know if it is the cause or not but the real problem is when flashing the r1k010 cid 16 it stops every time at 63% regardless of flashspeed. Even tried with the r1k010 EU6 and 3 files but still the same result. Flash error at 63%.... I get Error flashing block at address: 0x21280000 and Script error: flash error [3.82.66] With Cruiser v3.70 I get this instead Error flashing block at address: 0x2129000 Script error: flash error [3.70 gamma.61] Any help appreciated here //Niclas

05-26-2005, 19:41	#3 (permalink)
Nic Freak Poster Join Date: Aug 2003 Location: Sweden Age: 50 Posts: 273 Member: 36361 Status: Offline Thanks Meter: 0	Howdy Hmmm... then I can't see the harm in doing that, completing the flashing of the cid29 files then... I'll try that and get back. //Niclas EDIT: Tried with cid29 files and the very same result. Last edited by Nic; 05-26-2005 at 20:14.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How flash k750 cid29 by uni	MN110	Universalbox	3	11-14-2008 21:41
K700i CID29 "failed to load BOOTLOADERS" after flash With file CID36 !!!!	Dynamitor	Sony Ericsson	24	12-15-2007 03:55
Dead z1010 after flash with v6	vadasz	Phoenix Black Box	1	07-25-2005 02:31
Help dead Z1010 cid16	Albinas	Sonics Box	2	07-09-2005 16:26
Z1010 problem flashing R1k010 with setool	airboy	Sony Ericsson	0	05-23-2005 16:47

05-26-2005, 19:36	#2 (permalink)
arash Insane Poster Join Date: Sep 2003 Posts: 96 Member: 39271 Status: Offline Sonork: 100.71467 Thanks Meter: 25	as i have seen on website, cross-cid flashing is supported .. ''Full support for cross-CID flashing. It is possible to flash CID16, CID17 and CID29 phones by any-CID flashes''

05-26-2005, 20:35	#4 (permalink)
gbrooks3 No Life Poster Join Date: Jul 2004 Location: 0xBA, 0xBE Age: 38 Posts: 690 Member: 73743 Status: Offline Thanks Meter: 2	Try and flash the phone with a 'Z' recovery file in support area, then do full reflash.

05-27-2005, 17:21	#5 (permalink)
Nic Freak Poster Join Date: Aug 2003 Location: Sweden Age: 50 Posts: 273 Member: 36361 Status: Offline Thanks Meter: 0	Hi again, I tried with a 3G recovery file from support but no change in error at 63%. Will try with the Z if there is any difference or not. //Niclas

05-28-2005, 18:06	#7 (permalink)
Nic Freak Poster Join Date: Aug 2003 Location: Sweden Age: 50 Posts: 273 Member: 36361 Status: Offline Thanks Meter: 0	@Jani-Jan Which cause I need to flash phone??? If you do not have anything new to come up with then I suggest that you do not reply with such nonsense questions just in order to get your posts number increased. There might be several reasons for me to flash the phone. One is like everyone else to upgrade the phone if you haven't heard of such before. Back to the issue again. I do suspect a hardware fault in the flash IC and will send this Z1010 back to SE for warranty service. Unless someone else has any idea of what to do with it. //Niclas