Z800 cid36 dead with 3.91 - GSM-Forum

hamltd · 06-01-2005, 13:50

Ready!
EMMA smartcard detected at startup.
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 36
Phone color: Red
Trying CID29 recovery applet...
Sending applet prologue...

No suitable applet found.

Phone not power

Hamltd

eggwisher · 06-01-2005, 13:59

mm i'm not sure but try http://www.microengineers.cc/cruiser...ery_GSM_Series

and after flask with convertion file from V800 to z800
good luck

eggwisher · 06-01-2005, 14:00

opps sorrry

http://www.microengineers.cc/cruiser...very_3G_Series

Lead · 06-01-2005, 14:18

A bug. Reconnect battery and wait for next version. The phone is not dead.
I forgot to include some applets into the release version.

eggwisher · 06-01-2005, 14:23

lead plz where is the k300i test point pic??
i've killed 2 k300i already

hamltd · 06-01-2005, 14:35

I can connect K750 too flash mode with original DCU-60.
But Cruiser not find K750.

Hmltd

Lead · 06-01-2005, 14:50

DCU-60 can't be used with Cruiser.
DCU-60 is only a data cable that only supports firmware upgrade via FOTA.

hamltd · 06-01-2005, 15:03

Quote:

Originally Posted by Lead

DCU-60 can't be used with Cruiser.
DCU-60 is only a data cable that only supports firmware upgrade via FOTA.

..... and EMMA III

Hamltd

Lead · 06-01-2005, 15:21

FOTA is located in flash. EMMA III may utilize it.
FOTA won't let you to convert from red to brown.
Adding support for DCU-60 is IMHO useless.

Lucky7Napoleon · 06-01-2005, 15:32

Version 2.00 (12th January 2005, beta version):
Boot process optimized.
Fixed a minor bug when booting S7xx phones with phone type autodetection turned off.
RSA unlocking routine optimized. It works also for Z1010 and V800 of any color.
Added languagepack change for Z1010 and V800 phones.

so now v800 z800 cid36 is ok? supported? thanks

hamltd · 06-01-2005, 18:53

Z800 cid 36 alive.
But I can ulock this phone.

eady!
EMMA smartcard detected at startup.
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 36
Phone color: Red
Trying Red CID36 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Flash ID: 890D
OTP CID: 36
Phone hardware initialized OK
Analyzing configuration...
Reading primary certificate...
Primary certificate CID: 36
Primary certificate color: Red
Reading secondary certificate...
Secondary certificate CID: 36
Secondary certificate color: Brown
OSE configuration found.
Analysing GDFS...
Done.
Sending CS applet...
Initializing CS applet...
Checking EMMA smartcard presence...
Card serial number: xxxxxxxxx
Entering PIN: xxxx
Selecting key...
Checking key status...
Remaining number of uses: 190
Starting up GDFS service...
Reading security zone...
Done.
Turning off phone...
Phone turned off.
Phone automatically detached.
Connecting via Fighter USB Cable...
Powering on the phone...
Baseband chip ID: 0x7100
Protocol version: 3.1
Baudrate = 460800Bd
Sony Ericsson phone detected.
Phone CID: 36
Phone color: Red
Trying Red CID36 flash applet...
Sending applet prologue...
Sending applet body...
Time spent entering bootstrap: 1s
Initializing phone hardware...
Flash ID: 890D
OTP CID: 36
Phone hardware initialized OK
Analyzing configuration...
Reading primary certificate...
Primary certificate CID: 36
Primary certificate color: Red
Reading secondary certificate...
Secondary certificate CID: 36
Secondary certificate color: Brown
OSE configuration found.
Analysing GDFS...
Done.
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800Bd
Connect the testpoint!
Disconnect the testpoint!
Defeating RSA protection...

need test point???

Hamltd

hamltd · 06-01-2005, 19:26

Analyzing configuration...
Reading primary certificate...
Primary certificate CID: 36
Primary certificate color: Red
Reading secondary certificate...
Secondary certificate CID: 36
Secondary certificate color: Brown
OSE configuration found.
Analysing GDFS...
Done.
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800 Bd
Connect the testpoint!
Disconnect the testpoint!
Defeating RSA protection...

need test point for Z800

Thx!
Hamltd

MOBICOM · 06-02-2005, 00:14

Quote:

Originally Posted by hamltd

Analyzing configuration...
Reading primary certificate...
Primary certificate CID: 36
Primary certificate color: Red
Reading secondary certificate...
Secondary certificate CID: 36
Secondary certificate color: Brown
OSE configuration found.
Analysing GDFS...
Done.
Defeating RSA protection...
Waiting for the phone to turn off...
Should the communication hang, reinsert battery.
Baudrate = 460800 Bd
Connect the testpoint!
Disconnect the testpoint!
Defeating RSA protection...

need test point for Z800

Thx!
Hamltd

I don't understand totaly, why phones have two certificate and in this case also with diferent colours.
Which certificate is important when we flash phone to flash with same colour?

wbr.

muppet · 06-02-2005, 00:42

Quote:

Originally Posted by Lucky7Napoleon

Version 2.00 (12th January 2005, beta version):
Boot process optimized.
Fixed a minor bug when booting S7xx phones with phone type autodetection turned off.
RSA unlocking routine optimized. It works also for Z1010 and V800 of any color.
Added languagepack change for Z1010 and V800 phones.

so now v800 z800 cid36 is ok? supported? thanks

You have quoted the Cruiser 2.0 release notes! When the changelog for Cruiser 2.0 was released, CID36 did not exist (or was not public knowledge anyway)

Read the full release notes (specifially for Cruiser 3.90-3.92), CID36 is supported for brown phones, Red is only supported via TestPoint. It would seem that it's possible to convert Red to Brown (again, using TP)

evan_silbert · 06-02-2005, 01:23

Yes, it seems like the most graceful way to do what is needed with CID36 phones will be to connect TP once and convert them to brown, then work with them.

Hopefully a non-TP solution will eventually come, but that seems workable for now

We just need to know where the TPs are for Z800, K750, etc...

06-01-2005, 13:50	#1 (permalink)
hamltd Freak Poster Join Date: Jul 2001 Location: Russia Age: 52 Posts: 272 Member: 5238 Status: Offline Thanks Meter: 2	Z800 cid36 dead with 3.91 Ready! EMMA smartcard detected at startup. Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x7100 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 36 Phone color: Red Trying CID29 recovery applet... Sending applet prologue... No suitable applet found. Phone not power Hamltd

06-01-2005, 14:35	#6 (permalink)
hamltd Freak Poster Join Date: Jul 2001 Location: Russia Age: 52 Posts: 272 Member: 5238 Status: Offline Thanks Meter: 2	Also need K750 soution. I can connect K750 too flash mode with original DCU-60. But Cruiser not find K750. Hmltd

06-01-2005, 18:53	#11 (permalink)
hamltd Freak Poster Join Date: Jul 2001 Location: Russia Age: 52 Posts: 272 Member: 5238 Status: Offline Thanks Meter: 2	Thx Lead! Z800 cid 36 alive. But I can ulock this phone. eady! EMMA smartcard detected at startup. Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x7100 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 36 Phone color: Red Trying Red CID36 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Flash ID: 890D OTP CID: 36 Phone hardware initialized OK Analyzing configuration... Reading primary certificate... Primary certificate CID: 36 Primary certificate color: Red Reading secondary certificate... Secondary certificate CID: 36 Secondary certificate color: Brown OSE configuration found. Analysing GDFS... Done. Sending CS applet... Initializing CS applet... Checking EMMA smartcard presence... Card serial number: xxxxxxxxx Entering PIN: xxxx Selecting key... Checking key status... Remaining number of uses: 190 Starting up GDFS service... Reading security zone... Done. Turning off phone... Phone turned off. Phone automatically detached. Connecting via Fighter USB Cable... Powering on the phone... Baseband chip ID: 0x7100 Protocol version: 3.1 Baudrate = 460800Bd Sony Ericsson phone detected. Phone CID: 36 Phone color: Red Trying Red CID36 flash applet... Sending applet prologue... Sending applet body... Time spent entering bootstrap: 1s Initializing phone hardware... Flash ID: 890D OTP CID: 36 Phone hardware initialized OK Analyzing configuration... Reading primary certificate... Primary certificate CID: 36 Primary certificate color: Red Reading secondary certificate... Secondary certificate CID: 36 Secondary certificate color: Brown OSE configuration found. Analysing GDFS... Done. Defeating RSA protection... Waiting for the phone to turn off... Should the communication hang, reinsert battery. Baudrate = 460800Bd Connect the testpoint! Disconnect the testpoint! Defeating RSA protection... need test point??? Hamltd

06-01-2005, 19:26	#12 (permalink)
hamltd Freak Poster Join Date: Jul 2001 Location: Russia Age: 52 Posts: 272 Member: 5238 Status: Offline Thanks Meter: 2	Z800i Analyzing configuration... Reading primary certificate... Primary certificate CID: 36 Primary certificate color: Red Reading secondary certificate... Secondary certificate CID: 36 Secondary certificate color: Brown OSE configuration found. Analysing GDFS... Done. Defeating RSA protection... Waiting for the phone to turn off... Should the communication hang, reinsert battery. Baudrate = 460800 Bd Connect the testpoint! Disconnect the testpoint! Defeating RSA protection... need test point for Z800 Thx! Hamltd

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can I flash N-91 RM 43_8GB V.3.00.060 with N-91-5 RM 158 V.3.00.060 ?	phitsawarn	MT-BOX	4	04-14-2007 14:59
k750i cid36 dead	infogsm	Sony Ericsson	0	12-28-2006 02:40
V800 cid36 recovery? z800 cid36 ---> v800	Lucky7Napoleon	Cruiser Suite	5	07-09-2005 03:32
Z800 CID36 unlock problem	Virginia	Cruiser Suite	16	05-30-2005 04:44

06-01-2005, 13:59	#2 (permalink)
eggwisher Freak Poster Join Date: Jan 2005 Age: 42 Posts: 365 Member: 104924 Status: Offline Thanks Meter: 8	mm i'm not sure but try http://www.microengineers.cc/cruiser...ery_GSM_Series and after flask with convertion file from V800 to z800 good luck

06-01-2005, 14:00	#3 (permalink)
eggwisher Freak Poster Join Date: Jan 2005 Age: 42 Posts: 365 Member: 104924 Status: Offline Thanks Meter: 8	opps sorrry http://www.microengineers.cc/cruiser...very_3G_Series

06-01-2005, 14:18	#4 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	A bug. Reconnect battery and wait for next version. The phone is not dead. I forgot to include some applets into the release version.

06-01-2005, 14:23	#5 (permalink)
eggwisher Freak Poster Join Date: Jan 2005 Age: 42 Posts: 365 Member: 104924 Status: Offline Thanks Meter: 8	lead plz where is the k300i test point pic?? i've killed 2 k300i already

06-01-2005, 14:50	#7 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	DCU-60 can't be used with Cruiser. DCU-60 is only a data cable that only supports firmware upgrade via FOTA.

06-01-2005, 15:21	#9 (permalink)
Lead No Life Poster Join Date: Aug 2008 Age: 52 Posts: 3,292 Member: 1841 Status: Offline Thanks Meter: 469	FOTA is located in flash. EMMA III may utilize it. FOTA won't let you to convert from red to brown. Adding support for DCU-60 is IMHO useless.

06-01-2005, 15:32	#10 (permalink)
Lucky7Napoleon No Life Poster Join Date: Nov 2004 Location: Heaven of course! Age: 44 Posts: 943 Member: 93497 Status: Offline Thanks Meter: 2	Version 2.00 (12th January 2005, beta version): Boot process optimized. Fixed a minor bug when booting S7xx phones with phone type autodetection turned off. RSA unlocking routine optimized. It works also for Z1010 and V800 of any color. Added languagepack change for Z1010 and V800 phones. so now v800 z800 cid36 is ok? supported? thanks

06-02-2005, 01:23	#15 (permalink)
evan_silbert No Life Poster Join Date: Feb 2003 Location: Boston Posts: 5,027 Member: 21920 Status: Offline Thanks Meter: 10	Yes, it seems like the most graceful way to do what is needed with CID36 phones will be to connect TP once and convert them to brown, then work with them. Hopefully a non-TP solution will eventually come, but that seems workable for now We just need to know where the TPs are for Z800, K750, etc...