Problem with W995 unlock on 3.11 - Colour now Blue

[jimbo19]

Hoping someone can help here , purchased ultimate credit and unlocked the phone using d-ultimate .However there was a problem , the unlock did not ask to unplug and reconnect the DCU-60 cable

20:06:15 D-Ultimate Unlocker v3.11 by Cruiser Team
20:06:15 - Fast & Full - Unlock, Relock, Show codes, Sec.zone rebuild, EROM repair, CID change
20:06:16 Initializing...
! 20:06:16 1. Please see the documentation first (the tab 'Info' or attached .pdf file)
! 20:06:16 2. Choose the phone model
! 20:06:16 3. Select the desired options
! 20:06:16 4. Please connect the phone either via USB while holding 2-5.
! 20:06:16 - or via a serial cable and double-click on it in the device list
20:06:24 Selected phone: W995
20:06:24 Connecting via Generic EMP USB Flash Device (USB1).
20:06:24 Device driver version: 2.2.0.2
20:06:24 Device driver date: 12-5-2008
20:06:25 Connecting to the baseband CPU...
20:06:25 Entering baseband CPU service mode...
20:06:25 Detected chipset: DB3210 P2A
20:06:25 Boot mode: ROM
20:06:26 IMEI: xxxxxxxxxxxxxxxxx
20:06:26 OTP CID: 53
20:06:26 Product type: Retail
20:06:26 Effective color: Red
20:06:26 Sending loader...
20:06:31 Communicating with server.
! 20:06:34 News: Your credit consumption policy: Level 1 (Novice)
20:06:34 Remainig credit (supreme): 0.45
20:06:37 Remainig credit (supreme): 0
20:06:37 Restarting phone .
E 20:07:38 Error: 0xE1E2479D
E 20:07:38 Error: 0x07F5EFDA
E 20:07:38 Error: 0xA8A269DB
E 20:07:38 Error: 0xE7AA3974
E 20:07:38 Error: 0xDDB61C08
E 20:07:38 Error: 0xFB12E1E5
E 20:07:38 Error: 0x5EBDED89
E 20:07:38 Error: 0x3CA1C96F
E 20:07:38 Error: 0x14C12528
E 20:07:38 Error: 0x49BC9496
E 20:07:38 Error: 0x59AF7680
E 20:07:38 Cable disconnect detected
E 20:07:38 Failed!




I then disconnected cable and pressed restart on client
and got this


20:09:31 - Fast & Full - Unlock, Relock, Show codes, Sec.zone rebuild, EROM repair, CID change
20:09:31 Initializing...
! 20:09:31 1. Please see the documentation first (the tab 'Info' or attached .pdf file)
! 20:09:31 2. Choose the phone model
! 20:09:31 3. Select the desired options
! 20:09:31 4. Please connect the phone either via USB while holding 2-5…
! 20:09:31 - or via a serial cable and double-click on it in the device list
20:09:37 Selected phone: W995
20:09:37 Connecting via Generic EMP USB Flash Device (USB1)…
20:09:37 Device driver version: 2.2.0.2
20:09:37 Device driver date: 12-5-2008
20:09:38 Connecting to the baseband CPU...
20:09:38 Entering baseband CPU service mode...
20:09:38 Detected chipset: DB3210 P2A
20:09:38 Boot mode: ROM
20:09:39 IMEI: xxxxxxxxxxxxx
20:09:39 OTP CID: 53
20:09:39 Product type: Retail
20:09:39 Effective color: Blue
20:09:39 Sending loader...
20:09:42 Sending loader...
20:09:44 Writing flash…
20:09:45 Code NCK for relock: xxxxxxxxx
20:09:45 Code NSCK for relock: xxxxxxxxx
20:09:45 Code SPCK for relock: xxxxxxxxxx
20:09:45 Code CCK for relock: xxxxxxxxxxx
20:09:45 Code PCK for relock: xxxxxxxxxx
20:09:45 Code ESLCK for relock: xxxxxxxxx
20:09:45 Code NCK for unlock: xxxxxxxxxxx
20:09:45 Code NSCK for unlock: xxxxxxxxxxx
20:09:45 Code SPCK for unlock: xxxxxxxxxxxx
20:09:45 Code CCK for unlock: xxxxxxxxxxxx
20:09:45 Code PCK for unlock: xxxxxxxxxxxx
20:09:45 Code ESLCK for unlock: xxxxxxxxxxx
20:09:45 To enter a code, type < * * < on the phone with SIM-card inserted
20:09:46 Turning off the phone...
20:09:46 Done.


As you can see this has now changed the colour from Red to Blue
I did not select to change the Colour , will this now cause problems if I want to upgrade with SEUS ?? And what is the solution if any ?

Thanks

Jim

[jimbo19]

Anyone ??????????????????

[jimbo19]

Any supposrt avaialbale here ?
Used D-unlocker had issue (due to client) which is now upgraded to 4.01 because of this type of issue

My W995 now says colour is BLUE - how do I get it back to RED so I can use SEUS if needed
If it stays on Blue what are the implications ??

[Mainboard]

I don't think that your phone is Blue, it was blue BEFORE unlocking as you can see first was readed certificate color and after this was performed final unlock procedure.