***Ort product support***
 

please support ku9100 cyon phones












;)

Hi ,

SU910 / KU9100 Repair Dead Boot is already supported for a long time
Releated Pinouts / Dump / Repair Files are available in support area

Best Regards
Oz.

hi,

please send me via pm about procedure, tools version , cable difinition , etc,etc, on my ku9100 dead boot..

im new in this tool and i want you to assist me.








thanks
;)

LG SU910 / KU9100 Repair Guide

After Making Succesfull Connections accordingly to : JTAG Pinouts

1- Power on phone (it may not power on due to dead boot)
2- Start Software ( ORT Plus Latest Version )
3- Click Scan & After having the phone detected !
4- Select File "LG-SU910_KU9100_0x00000000_8M.bin"
5- Click Write & Wait for process to finish !


if not get detected @ Step 3:
#You may need to use PS_HOLD "Look for PS_HOLD point on the pcb and learn how to use PS_HOLD in Master Manual in support area

Find out you really need PS_HOLD ?
#Powering on the phone VREF Pin should give 2.6V !
#if 2.6V not exist even you powered on , you need PS_HOLD !

What else you can do without PS_HOLD ?
#You can hold power button pressed during the operation time
#But PS_HOLD is recommended

PS_HOLD Usage Summary :
#Connect PS_HOLD 4.7K resistor and connect to battery !


After having succesfully written please disconnect !
You may need to flash your phone with original firmware and flasher !


Smiliar Manual and new Pinout pictures uploaded to support area

Best Regards
http://www.ORT-JTAG.com

cable connection is very important before doing that procedue, please explain what color what name on cable.

only pinout on pcb in your support :(










please :)

Do you have Rainbow cable in hand that comes in package ?
Actually on the picture there is front view of the cable !

I will post a picture very soon .

But Accordingly to last cables we shipped !

1-VREF(Black)
3-TRST (Grey)
5-TDI (Blue)
7-TMS (Yellow)
9-TCK (Red)
11-RTCK (Black)
13-TDO (Grey)
15-RST (Blue)
16-GND (Green)


Best Regards
Oz.

need pinout on pcb ku9100 cyon :)



after fix my ku9100 next we have SU600 dead boot also.


link > http://forum.gsmhosting.com/vbb/f594...s-box-1167953/








thanks in advance ;)










;)

i have same problem with my cable but my cable it white coulor
can i use same pinout by numbers?

Yes it is same pinout already !

i will make another picture with grey color Cable for you !
Consider only connector Header !


Best Regards
Oz.

Plz tell me full menual

how to repair zte c3330.332,335,336 dead boot repair .today i will purchese ort box but not succesfull zte c332 dead boot repair plz elecroboys sir.
try to dump file flashing .flashing complited but not detectad com port with zte flasher plz

It gets powered on and definitely works !
Can you try to flash with latest version with Verify selected lets see if there is any error

Br
Oz.

Qualcomm 6030 cpu Pinout.
 

Please give me pinout of Huwai 5330. It is QSC6030.

I will do it :) full solution for you .

Hello Electro

,I have HD2 T-mobile , Dead Boot By writing Wrong RUU ,
I write HD2 t-mobile Repair ORT File But Mobile Not Going To working Still dead

plzz Give Me suggestion How to Solve Boot

Br