Setool2 Card Update, Information, TroubleShooting. [ READ FIRST POST ] - GSM-Forum

lalitjsraks · 09-14-2011, 15:23

WARNING !!!

As there is too much "blocked" setool2 GEMALTO TOP cards,we investigated issue and found problem.

due to errors in controller firmware ( or due to incompatibility between smartcard/controller firmware/motherboard usb controller )
all smartcard readers i know, which are based on CY7C63001 are failed to send long data packet to/from smartcard.
it happens on some systems only, it can happen not immediately, but on "affected" system it happens always, earlier or later.

due to that, smartcard will receive WRONG command and SETOOL2 WILL BE "BLOCKED".
THAT IS NOT RELATED TO "BLOCKED CARDMANAGER" ISSUE ( ERROR #6982 )
i can not find ANY solution to that problem, other than NOT using Cypress CY7C63001-based readers with setool2 cards.

here is few pictures of AFFECTED readers:

you can also identify such reader by smartcard reader name and driver name:

if you will use that readers, your setool2 smartcard WILL BE BLOCKED - and i will unblock such card ONLY ONCE.

IMPORTANT !
I WILL ONLY UNBLOCK GEMALTO-TOP SMARTCARDS - WITH SERIAL 177500 and above

my strong recommendation is use om****y-based readers, like that:

they are working 100% on any system.

of course, usage of latest setool2 version is ABSOLUTE requirement.

QUESTIONS AND ANSWERS

q:
What is card update? which card need to be updated?

a:
SmartCard update required to use 1.107 and following setool2 versions.
All SEtool cards with serial numbers till 177500 must be updated.

q:
how to update setool2 card ? what do i need ?

a:

to update setool2 card, you need valid setool2 account, normal internet connection ( NOT proxy ), open TCP ports 443,1934

put updater ( updater.zip ) in setool2 directory, it will auto read settings from setool2.ini.

Or extract it to any desired directory and fill username,password,server manually.

server address is:

Code:

srv01.dontexist.com

Always get updater from this thread or from setool2 homepage !!!
current updater version is 0.95 !!!
any lower versions will NOT work !!!

if you do not have valid setool2 account, use special updater account:

Code:

username=updater 
password=updater

on "operations" tab select with mouse click reader with setool2 card.
( remove all smartcards from pc except setool2 one in order to avoid misunderstanding )

you will get "Ready to work" text.
press "update card" button only after you get that.

if your setool2 card not activated ( you can NOT use setool2 version > 1.01 )
you need 20 credits for initial card update.
Credits will be discounted AUTOMATICALLY WITHOUT CONFIRMATION.

if your card eligible for update, you will see following text:

Code:

setool2 SmartCard updater [x.xx] 
 server read: "srv01.dontexist.com" 
username read: "update_test"  
Please click on reader with setool2 SmartCard. 
Ready to work SmartCard update started..... 
CARD SERIAL: 12345678 
Checking with server... setool2 card not activated, 
credits will be used...... Uploading............................................................................ Update completed

you will get usual "no credits" message in case if you do not have needed credits amount.

in time after time, we will update setool2 smartcard, corresponding notice will be posted in news.
for normal update you do not need any credits, but valid setool2 account required.
if your card eligible for normal update, you will see following text:

Code:

setool2 SmartCard updater [x.xx]  
server read: "srv01.dontexist.com" 
username read: "update_test" 
 Please click on reader with setool2 SmartCard. 
Ready to work SmartCard update started...
 CARD SERIAL: 12345678 
Checking with server......... Uploading............................................................................ Update completed

if card already updated, you will get following text:

Code:

SmartCard update started... 
CARD SERIAL: 12345678 
Checking with server. 
cmd err: [request denied]

you DO NOT NEED card update in that case.

if you will get next error message :

Code:

Please click on reader with setool2 SmartCard. 
Ready to work SmartCard update started..
 CARD IS BLOCKED. 
RECOVERY SERIAL: xxxxxxxxxxxxxxxx 
Checking with server.. 
auth #0 err: [request denied]

if you getting that text, you should post request in that thread with
- your account username
- setool2 card original serial
- reported recovery serial

admin will check issue and write resolution.

most bad thing that can happen:
if you will get next results

Code:

SmartCard update started..... 
CARD SERIAL: 00xxxxxxx 
Checking with server...... 
auth #1 err: 6982

that means your card was permanently tampered by some tools and you stuck to v1.106
nothing can be done at all.

please note, that after initial update you can only use setool2 version >= v1.107

q:
how to activate LGTool ? what do i need ?

a:
to activate LGTool, you need valid setool2 account, normal internet connection ( NOT proxy ), open TCP ports 443,1934
you do not need to have setool2 credits on account.

put attached updater in setool2 directory ( it will auto read settings from setool2.ini )
or extract it to any desired directory and fill username,password,server manually.

server address is:

Code:

srv01.dontexist.com

on "operations" tab select with mouse click reader with setool2 card.
( remove all smartcards from pc except setool2 one in order to avoid misunderstanding )

you will get "Ready to work" text.
Then press "Activate LGTool" button

if your card eligible for activation, you will get next text:

Code:

setool2 SmartCard updater [x.xx] 
server read: "srv01.dontexist.com"
 username read: "update_test" 
 Please click on reader with setool2 SmartCard. 
Ready to work 
Checking with server.. 
LG application activated

updater link : http://files.setool.net/support/SETool2/updater.zip

Code:

NOTE : always use latest updater  for card update and activation

lalitjsraks · 09-15-2011, 05:47

even server is down .
everyone is unlocking most of sony ericsson phones with setool .
although you can also unlock most of new android phones .

humancom · 09-15-2011, 15:24

hoe can i download the updater.zip ?

lalitjsraks · 09-15-2011, 15:31

Quote:

Originally Posted by humancom

hoe can i download the updater.zip ?

here another link .

http://forum.gsmhosting.com/vbb/7701598-post2.html

street · 09-30-2011, 11:09

SmartCard update started...
CARD SERIAL: 00033483
Checking with server.
cmd err: [request denied]

second time i get

SmartCard update started...
CARD SERIAL: 00033483
Checking with server.
recv err: [Connection reset by peer]

user name: simo11

lalitjsraks · 10-02-2011, 09:56

Quote:

Originally Posted by street

SmartCard update started...
CARD SERIAL: 00033483
Checking with server.
cmd err: [request denied]

second time i get

SmartCard update started...
CARD SERIAL: 00033483
Checking with server.
recv err: [Connection reset by peer]

user name: simo11

your card is already activated .

any questions about smartcard problems should be posted in corresponding sticky thread,here

if you can not run recent setool2 version, please follow instructions here

.::Indian::. · 10-14-2011, 09:21

Ready to work
SmartCard update started..
CARD IS BLOCKED.
RECOVERY SERIAL: 3541081F
Checking with server..
recv err: [Connection reset by peer]

it is new setool from gpg.we updated and used this but it showed blocked card while flashing. ple give me solution.

lalitjsraks · 10-14-2011, 09:32

Quote:

Originally Posted by .::Indian::.

Ready to work
SmartCard update started..
CARD IS BLOCKED.
RECOVERY SERIAL: 3541081F
Checking with server..
recv err: [Connection reset by peer]

it is new setool from gpg.we updated and used this but it showed blocked card while flashing. ple give me solution.

read first post .
the only thing i can say is try this way and post as described .

any questions about smartcard problems should be posted in corresponding sticky thread,here

if you can not run recent setool2 version, please follow instructions here

colombia gsm · 10-25-2011, 18:42

plz help to update my card

Ready to work
SmartCard update started...
CARD SERIAL: 00186283
Checking with server.
cmd err: [request denied]

lalitjsraks · 10-29-2011, 10:05

Quote:

Originally Posted by aayushjaiswal

solve my sony ericsson k510i show in screen configuration error.please contact your network operator or service centre.

i go to setting or mark the singened mode and customis phone after flash click on flash flash file not added

already solved by pm message .
anyway .
just tick on signed mode and customize phone after flash
and press flash .

Ryanscalvi · 11-13-2011, 16:18

help me please
CARD SERIAL: 00181393
Checking with server.
recv err: [Connection reset by peer]

lalitjsraks · 11-13-2011, 16:23

Quote:

Originally Posted by Ryanscalvi

help me please
CARD SERIAL: 00181393
Checking with server.
recv err: [Connection reset by peer]

try after some time ( after 30 minutes ) .
after several wrong retries server blocks users ip for 30 minutes .

RandikaN · 11-27-2011, 19:00

Ready to work
SmartCard update started.....
CARD SERIAL: 00126253
Checking with server...
setool2 card not activated, credits will be used..
auth #0 err: [No credits left]

cant update my setool Please help me

lalitjsraks · 11-29-2011, 15:39

Quote:

Originally Posted by RandikaN

Ready to work
SmartCard update started.....
CARD SERIAL: 00126253
Checking with server...
setool2 card not activated, credits will be used..
auth #0 err: [No credits left]

cant update my setool Please help me

hard to read and understand .

auth #0 err: [No credits left]

you need 20 credits to activate your setool card fully to use new version .

ABDULMANAN · 11-29-2011, 15:46

please help that gpg raptor box is good for setool r need change in future

09-14-2011, 15:23	#1 (permalink)
lalitjsraks No Life Poster Join Date: Mar 2004 Location: jamshedpur Age: 38 Posts: 4,303 Member: 59185 Status: Offline Sonork: 100.1593175 Thanks Meter: 4,911	Setool2 Card Update, Information, TroubleShooting. [ READ FIRST POST ] WARNING !!! As there is too much "blocked" setool2 GEMALTO TOP cards,we investigated issue and found problem. due to errors in controller firmware ( or due to incompatibility between smartcard/controller firmware/motherboard usb controller ) all smartcard readers i know, which are based on CY7C63001 are failed to send long data packet to/from smartcard. it happens on some systems only, it can happen not immediately, but on "affected" system it happens always, earlier or later. due to that, smartcard will receive WRONG command and SETOOL2 WILL BE "BLOCKED". THAT IS NOT RELATED TO "BLOCKED CARDMANAGER" ISSUE ( ERROR #6982 ) i can not find ANY solution to that problem, other than NOT using Cypress CY7C63001-based readers with setool2 cards. here is few pictures of AFFECTED readers: you can also identify such reader by smartcard reader name and driver name: if you will use that readers, your setool2 smartcard WILL BE BLOCKED - and i will unblock such card ONLY ONCE. IMPORTANT ! I WILL ONLY UNBLOCK GEMALTO-TOP SMARTCARDS - WITH SERIAL 177500 and above my strong recommendation is use om**y-based readers, like that: they are working 100% on any system. of course, usage of latest setool2 version is ABSOLUTE requirement. QUESTIONS AND ANSWERS q: What is card update? which card need to be updated? a: SmartCard update required to use 1.107 and following setool2 versions. All SEtool cards with serial numbers till 177500 must be updated. q: how to update setool2 card ? what do i need ? a: to update setool2 card, you need valid setool2 account, normal internet connection ( NOT proxy ), open TCP ports 443,1934 put updater ( updater.zip ) in setool2 directory, it will auto read settings from setool2.ini. Or extract it to any desired directory and fill username,password,server manually. server address is: Code: srv01.dontexist.com Always get updater from this thread or from setool2 homepage !!! current updater version is 0.95 !!! any lower versions will NOT work !!! if you do not have valid setool2 account, use special updater account: Code: username=updater password=updater on "operations" tab select with mouse click reader with setool2 card. ( remove all smartcards from pc except setool2 one in order to avoid misunderstanding ) you will get "Ready to work" text. press "update card" button only after you get that. if your setool2 card not activated ( you can NOT use setool2 version > 1.01 ) you need 20 credits for initial card update. Credits will be discounted AUTOMATICALLY WITHOUT CONFIRMATION. if your card eligible for update, you will see following text: Code: setool2 SmartCard updater [x.xx] server read: "srv01.dontexist.com" username read: "update_test" Please click on reader with setool2 SmartCard. Ready to work SmartCard update started..... CARD SERIAL: 12345678 Checking with server... setool2 card not activated, credits will be used...... Uploading............................................................................ Update completed you will get usual "no credits" message in case if you do not have needed credits amount. in time after time, we will update setool2 smartcard, corresponding notice will be posted in news. for normal update you do not need any credits, but valid setool2 account required. if your card eligible for normal update, you will see following text: Code: setool2 SmartCard updater [x.xx] server read: "srv01.dontexist.com" username read: "update_test" Please click on reader with setool2 SmartCard. Ready to work SmartCard update started... CARD SERIAL: 12345678 Checking with server......... Uploading............................................................................ Update completed if card already updated, you will get following text: Code: SmartCard update started... CARD SERIAL: 12345678 Checking with server. cmd err: [request denied] you DO NOT NEED card update in that case. if you will get next error message : Code: Please click on reader with setool2 SmartCard. Ready to work SmartCard update started.. CARD IS BLOCKED. RECOVERY SERIAL: xxxxxxxxxxxxxxxx Checking with server.. auth #0 err: [request denied] if you getting that text, you should post request in that thread with - your account username - setool2 card original serial - reported recovery serial admin will check issue and write resolution. most bad thing that can happen: if you will get next results Code: SmartCard update started..... CARD SERIAL: 00xxxxxxx Checking with server...... auth #1 err: 6982 that means your card was permanently tampered by some tools and you stuck to v1.106 nothing can be done at all. please note, that after initial update you can only use setool2 version >= v1.107 q: how to activate LGTool ? what do i need ? a: to activate LGTool, you need valid setool2 account, normal internet connection ( NOT proxy ), open TCP ports 443,1934 you do not need to have setool2 credits on account. put attached updater in setool2 directory ( it will auto read settings from setool2.ini ) or extract it to any desired directory and fill username,password,server manually. server address is: Code: srv01.dontexist.com on "operations" tab select with mouse click** reader with setool2 card. ( remove all smartcards from pc except setool2 one in order to avoid misunderstanding ) you will get "Ready to work" text. Then press "Activate LGTool" button if your card eligible for activation, you will get next text: Code: setool2 SmartCard updater [x.xx] server read: "srv01.dontexist.com" username read: "update_test" Please click on reader with setool2 SmartCard. Ready to work Checking with server.. LG application activated updater link : http://files.setool.net/support/SETool2/updater.zip Code: NOTE : always use latest updater for card update and activation Last edited by Danish Shafiq; 04-17-2012 at 05:50. Reason: Updated

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Eeprom reading	KLImax	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	09-22-2011 15:55
NOKIA TECHNICAL SERVICE BOOK AND NOKIA SERVICING SIM CARD FOR SALE TRADE FOR 7110	andrew bennett	Main Sales Section	0	07-09-1999 10:41

09-15-2011, 05:47	#2 (permalink)
lalitjsraks No Life Poster Join Date: Mar 2004 Location: jamshedpur Age: 38 Posts: 4,303 Member: 59185 Status: Offline Sonork: 100.1593175 Thanks Meter: 4,911	even server is down . everyone is unlocking most of sony ericsson phones with setool . although you can also unlock most of new android phones .

09-15-2011, 15:24	#3 (permalink)
humancom Junior Member Join Date: Nov 2009 Posts: 26 Member: 1155682 Status: Offline Thanks Meter: 0	hoe can i download the updater.zip ?

09-30-2011, 11:09	#5 (permalink)
street No Life Poster Join Date: Mar 2003 Location: paris Age: 44 Posts: 1,274 Member: 24284 Status: Offline Thanks Meter: 56	SmartCard update started... CARD SERIAL: 00033483 Checking with server. cmd err: [request denied] second time i get SmartCard update started... CARD SERIAL: 00033483 Checking with server. recv err: [Connection reset by peer] user name: simo11

10-14-2011, 09:21	#7 (permalink)
.::Indian::. No Life Poster Join Date: Aug 2003 Location: Kerala Posts: 941 Member: 37015 Status: Offline Thanks Meter: 67	Ready to work SmartCard update started.. CARD IS BLOCKED. RECOVERY SERIAL: 3541081F Checking with server.. recv err: [Connection reset by peer] it is new setool from gpg.we updated and used this but it showed blocked card while flashing. ple give me solution.

10-25-2011, 18:42	#9 (permalink)
colombia gsm Freak Poster Join Date: Aug 2005 Location: Ghana Age: 42 Posts: 251 Member: 171776 Status: Offline Thanks Meter: 17	plz help to update my card Ready to work SmartCard update started... CARD SERIAL: 00186283 Checking with server. cmd err: [request denied]

11-13-2011, 16:18	#11 (permalink)
Ryanscalvi Junior Member Join Date: Dec 2007 Posts: 10 Member: 666637 Status: Offline Thanks Meter: 0	help me please CARD SERIAL: 00181393 Checking with server. recv err: [Connection reset by peer]

11-27-2011, 19:00	#13 (permalink)
RandikaN Junior Member Join Date: Jun 2011 Posts: 2 Member: 1599026 Status: Offline Thanks Meter: 0	Ready to work SmartCard update started..... CARD SERIAL: 00126253 Checking with server... setool2 card not activated, credits will be used.. auth #0 err: [No credits left] cant update my setool Please help me

11-29-2011, 15:46	#15 (permalink)
ABDULMANAN No Life Poster Join Date: Apr 2008 Location: LOVE A L L AH LOVE ALQURAN Posts: 1,944 Member: 754324 Status: Offline Sonork: LOVE MOHAMMAD (S.A.W) Thanks Meter: 500	please help that gpg raptor box is good for setool r need change in future