[GT-B3210] Unknown MSL layer ... - GSM-Forum

slklite · 11-05-2011, 21:27

Hello, I have a problem and can't unlock a phone ...

Looking for phone...
Phone detected. Line: USB
Phone Model: B3210
Phone IMEI: xxxxxxxxxxxxxxxxx
Firmware Version: B3210JPJD1
Revision: MP 0.600
Reading in progress...
Approx.Time remain: 00:00:00
Error: Unknown MSL layer!

I'd like to know also the difference between 3210, 3210C, 3210M ???

Could you help me please ?

Thank you.

Best regards.

**gsminfo** · 11-06-2011, 08:29

>> Read Unlock codes by USB Cable <<

1. Install Samsung USB Drivers from support> Samsung_USBDrivers.exe
2. Connect powered on phone to USB data cable.
3. Install drivers.
4. Select "Read Unlock Codes" and click EXECUTE and wait for unlock codes
5. If there will be problem to detect/read phone then KEEP PRESSING ANY KEY
6. Follow instructions how to unlock/remove freeze phone.

NOTE!!! If phone is not detect on USB cable then go to menu and find USB connection option and change to PC Mode

Try again please ... Step by step and paste info here .

B R

slklite · 11-06-2011, 12:54

Hello and thank you for your answer.

I already did what you said, before posting in here ...

As you can see, the phone is detected all right, but just can't read the unlock code ...

It reads the phone lock code all right I guess, but NOT the unlock code ...

King_ · 11-06-2011, 12:56

I HAVE HWK-UFS DO THIS... Its very easy... tried on many handsets.

1. Switch On Phone and Connect USB Cable.
2. Select ssm1 port in [Interface] ComboBox.
3. Press [Info] button, will see info like this:

Phone Must be with Battery and Powered On !
Software: B3210XXII4
Regions : Austria,Benelux,France,Germany,Hungary,Italy,Spain ,UK
Language: de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Release : 2009 September Rev: 4
CSC Vers: B3210OXAII4
Regions : Austria,France,Germany,Italy,Netherlands,Switzerla nd,UK
Language: de,en,es,fr,it,nl,pt,tr
Release : 2009 September Rev: 4
Hardware: MP 0.601
IMEI: 358628-03-099690-0
BT Address: c87e75-cb4abb
Lock Level: 00 [Not Locked]
MSL : Active
S/N : RD3SC79975
To Make MSL Bypass in USB Mode, Use [Repair MSL] at first !
(not need to Write E2P or MCU )
Locks: Error

4. Disconnect USB cable, Switch Off Phone.
5. Enter Phone to USB Download Mode (Hold * button and insert Cable)
6. Select ssm0 port in [Interface] ComboBox.
7. Press [Repair MSL] button, software will ask about S/N,
make sure is same as see in Info. Not need write any MCU or E2P files.

Using MSL S/N: RD3SC79975
USB Boot Ok, McuId: 00050015, Ubl: BC8906B3, 7-1.1 (Vision X115E)
Fll Boot Ok, Vers: 5.22, fl_sceptreeg_vx100_eval_usb_s06_t.sre
Flash1: Fl_Id: 00890000_88B00000 - Intel SIBLEY 1024
Flash2: Fl_Id: 00890000_88B00000 - Intel SIBLEY 1024
Read Done, St: 0x23FC0000, 262144 byte(s), Time: 00:01, 0
Flashing NOR part...
Write Done, 262160 byte(s), Time: 00:01

8. Disconnect USB cable, Switch On Phone.
9. Select ssm1 port in [Interface] ComboBox.
10. Press [Info] button, will see info like this:

Phone Must be with Battery and Powered On !
Software: B3210XXII4
Regions : Austria,Benelux,France,Germany,Hungary,Italy,Spain ,UK
Language: de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr )
Release : 2009 September Rev: 4
CSC Vers: B3210OXAII4
Regions : Austria,France,Germany,Italy,Netherlands,Switzerla nd,UK
Language: de,en,es,fr,it,nl,pt,tr
Release : 2009 September Rev: 4
Hardware: MP 0.601
IMEI: 358628-03-099690-0
BT Address: c87e75-cb4abb
Lock Level: 00 [Not Locked]
MSL : Active
S/N : RD3SC79975
MSL : Deactivated
PCK : 00000000 [#0141*00000000#]
NCK : 00000000 [#0111*00000000#]
SCK : 00000000 [#0121*00000000#]
SPCK: 00000000 [#0133*00000000#]
MCK : 15234981 [#0111*15234981#]

11. Now can use Unlock Codes or do any other Operations
(Repair IMEI, etc.) Phone not need anymore to [Repair MSL]

slklite · 11-06-2011, 13:02

Hello and thank you for your answer.

Unfortunately I only have UFS 2 (or 3, don't remember) and no HWK ...

I have to do it by code, but can't do it really coz I don't know which network it's locked on ...

That's why I tried KK

King_ · 11-06-2011, 18:55

Any ufs no probs bro...

Just do the above steps... you will succeed.

slklite · 11-06-2011, 21:55

Well, thank you for the tip, but unfortunately, it's been a while since I used, and I don't have access to support anymore ...

slklite · 11-09-2011, 15:26

Any news on my problem guys ?

slklite · 11-16-2011, 12:44

Still nothing guys ?

11-05-2011, 21:27	#1 (permalink)
slklite Junior Member Join Date: Aug 2005 Age: 26 Posts: 12 Member: 175942 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	[GT-B3210] Unknown MSL layer ... Hello, I have a problem and can't unlock a phone ... Looking for phone... Phone detected. Line: USB Phone Model: B3210 Phone IMEI: xxxxxxxxxxxxxxxxx Firmware Version: B3210JPJD1 Revision: MP 0.600 Reading in progress... Approx.Time remain: 00:00:00 Error: Unknown MSL layer! I'd like to know also the difference between 3210, 3210C, 3210M ??? Could you help me please ? Thank you. Best regards.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
thread	Thread Starter	Forum	Replies	Last Post
"Battey Unknown " ...SAGEM	MOTGSM	Nokia Hardware & Hardware-Repair Area	0	11-03-2001 18:41
Revive A40 unknown version	rayback	x1x to x45/x50	1	10-29-2001 07:42
Unknown F_loader 00208892!!!!!	reo	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	1	10-05-2001 22:57
Unknown phone from Libertel	dusan.g	Various	2	06-20-2001 21:43
How an unknown 5110 became a 5110 5.28 with changed imei :)	Zianna	Nokia Legacy Phones ( DCT-1 , DCT-2 , DCT-3 , DCT-L )	0	03-13-2001 07:43

11-06-2011, 08:29	#2 (permalink)
gsminfo Product Manager Join Date: Mar 2003 Location: Poland Age: 42 Posts: 5,679 Member: 23714 Status: Offline Thanks: 749 Thanked 18,762 Times in 1,187 Posts	>> Read Unlock codes by USB Cable << 1. Install Samsung USB Drivers from support> Samsung_USBDrivers.exe 2. Connect powered on phone to USB data cable. 3. Install drivers. 4. Select "Read Unlock Codes" and click EXECUTE and wait for unlock codes 5. If there will be problem to detect/read phone then KEEP PRESSING ANY KEY 6. Follow instructions how to unlock/remove freeze phone. NOTE!!! If phone is not detect on USB cable then go to menu and find USB connection option and change to PC Mode Try again please ... Step by step and paste info here . B R

11-06-2011, 12:54	#3 (permalink)
slklite Junior Member Join Date: Aug 2005 Age: 26 Posts: 12 Member: 175942 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Hello and thank you for your answer. I already did what you said, before posting in here ... As you can see, the phone is detected all right, but just can't read the unlock code ... It reads the phone lock code all right I guess, but NOT the unlock code ...

11-06-2011, 12:56	#4 (permalink)
King_ Banned Join Date: Jan 2011 Age: 27 Posts: 459 Member: 1496671 Status: Offline Thanks: 123 Thanked 87 Times in 70 Posts	I HAVE HWK-UFS DO THIS... Its very easy... tried on many handsets. 1. Switch On Phone and Connect USB Cable. 2. Select ssm1 port in [Interface] ComboBox. 3. Press [Info] button, will see info like this: Phone Must be with Battery and Powered On ! Software: B3210XXII4 Regions : Austria,Benelux,France,Germany,Hungary,Italy,Spain ,UK Language: de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr ) Release : 2009 September Rev: 4 CSC Vers: B3210OXAII4 Regions : Austria,France,Germany,Italy,Netherlands,Switzerla nd,UK Language: de,en,es,fr,it,nl,pt,tr Release : 2009 September Rev: 4 Hardware: MP 0.601 IMEI: 358628-03-099690-0 BT Address: c87e75-cb4abb Lock Level: 00 [Not Locked] MSL : Active S/N : RD3SC79975 To Make MSL Bypass in USB Mode, Use [Repair MSL] at first ! (not need to Write E2P or MCU ) Locks: Error 4. Disconnect USB cable, Switch Off Phone. 5. Enter Phone to USB Download Mode (Hold * button and insert Cable) 6. Select ssm0 port in [Interface] ComboBox. 7. Press [Repair MSL] button, software will ask about S/N, make sure is same as see in Info. Not need write any MCU or E2P files. Using MSL S/N: RD3SC79975 USB Boot Ok, McuId: 00050015, Ubl: BC8906B3, 7-1.1 (Vision X115E) Fll Boot Ok, Vers: 5.22, fl_sceptreeg_vx100_eval_usb_s06_t.sre Flash1: Fl_Id: 00890000_88B00000 - Intel SIBLEY 1024 Flash2: Fl_Id: 00890000_88B00000 - Intel SIBLEY 1024 Read Done, St: 0x23FC0000, 262144 byte(s), Time: 00:01, 0 Flashing NOR part... Write Done, 262160 byte(s), Time: 00:01 8. Disconnect USB cable, Switch On Phone. 9. Select ssm1 port in [Interface] ComboBox. 10. Press [Info] button, will see info like this: Phone Must be with Battery and Powered On ! Software: B3210XXII4 Regions : Austria,Benelux,France,Germany,Hungary,Italy,Spain ,UK Language: de,en,es,fr,hu,it,nl,pt(cs,da,el,fi,no,pl,sl,sv,tr ) Release : 2009 September Rev: 4 CSC Vers: B3210OXAII4 Regions : Austria,France,Germany,Italy,Netherlands,Switzerla nd,UK Language: de,en,es,fr,it,nl,pt,tr Release : 2009 September Rev: 4 Hardware: MP 0.601 IMEI: 358628-03-099690-0 BT Address: c87e75-cb4abb Lock Level: 00 [Not Locked] MSL : Active S/N : RD3SC79975 MSL : Deactivated PCK : 00000000 [#014100000000#] NCK : 00000000 [#011100000000#] SCK : 00000000 [#012100000000#] SPCK: 00000000 [#013300000000#] MCK : 15234981 [#0111*15234981#] 11. Now can use Unlock Codes or do any other Operations (Repair IMEI, etc.) Phone not need anymore to [Repair MSL]

11-06-2011, 13:02	#5 (permalink)
slklite Junior Member Join Date: Aug 2005 Age: 26 Posts: 12 Member: 175942 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Hello and thank you for your answer. Unfortunately I only have UFS 2 (or 3, don't remember) and no HWK ... I have to do it by code, but can't do it really coz I don't know which network it's locked on ... That's why I tried KK

11-06-2011, 18:55	#6 (permalink)
King_ Banned Join Date: Jan 2011 Age: 27 Posts: 459 Member: 1496671 Status: Offline Thanks: 123 Thanked 87 Times in 70 Posts	Any ufs no probs bro... Just do the above steps... you will succeed.

11-06-2011, 21:55	#7 (permalink)
slklite Junior Member Join Date: Aug 2005 Age: 26 Posts: 12 Member: 175942 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Well, thank you for the tip, but unfortunately, it's been a while since I used, and I don't have access to support anymore ...

11-09-2011, 15:26	#8 (permalink)
slklite Junior Member Join Date: Aug 2005 Age: 26 Posts: 12 Member: 175942 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Any news on my problem guys ?

11-16-2011, 12:44	#9 (permalink)
slklite Junior Member Join Date: Aug 2005 Age: 26 Posts: 12 Member: 175942 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	Still nothing guys ?