KK SL3 Cloud Server Ver 1.3 Released

[gsminfo]

KK SL3 Cloud Server Ver. 1.3 Final Released



KKSL3 Cloud Server Ver 1.3 Link for Download Here

Added: Accept button(for users with remote connection software)
Added: Auto DB save after any DB modification(to DB_AutoSave directory)
Fixed: Finish job while IMEI is still calculated by other machines
Fixed: Missing old *.cod file in mail
Fixed: Out of license message


KKSL3 Cloud Server Ver 1.2 Link for Download Here

- Sending *COD files by mail added
- Sending SL3 volue by mail added

Work for KK and NanoBox Users !

Allows you to manage computers calculating SL3.
You can build a local network and the Internet.
The system controls the work of computers and divides the work to all in equal parts.
If any of the computers can find the code, others stop counting and start a new IMEI.
If you enter the email address of his client, after calculating the code server will send an email with the code for your client.
You can expand the system to different amounts of computers.
For cost of 50 € you can connect 10 computers. If you have more computers, then you have to buy another license for another 10 computers.


=================
MAIN BUTTONS
=================

START - run/stop server activity
LOAD DB/SAVE DB - load/save database from/to file
CLEAR DB - clear database in server
READ LOG - read log files with IMEI and HASH


=============================
DEBUG/DATABASE/SETTINGS TABs
=============================

# DEBUG #

in debug will be displayed remote connections to server etc


# Database #

!New record or edited record must be ALWAYS confirmed by ENTER key!
!Used record is marked as RED and cannot be modified
!Selected record is marked as CYAN (will mask RED used record when actually selected)

ID - unique ID of record
FINISHED - indicator of finished record(SL3 value found or not)
IN_USE - indicator of already used record
IMEI - IMEI number to store
HASH - HASH value to store
START_DT - First access record date/time.
STOP_DT - end record date/time(when SL3 Value is found or not)
MAIL - email address to send result and cod files(not finished yet)
NOTES - user notes


# SETTINGS #

- Copy license file to directory with server application
- Start server application
- If is first time when you run it, then server must be configured(notification will be displayed)
- Go to "SETTINGS" page and set:

1) Port - choice any port which do not collide with any port used in system and is in range 1024-65535
2) Access Password - set password to protect access to server(empty password = everyone can access). Password will be required for every calculating computer
Password is hidden, you can always unhide it by mark "unhide" checkbox. Select strong password or use build in generator - "generate random"
3) Click "Save settings"

Server is configured and ready to write data to database.




1. Used record is marked as RED and cannot be modified.
2. Selected record is marked as CYAN (will mask RED used record when actually selected) .
3. Every changes in record must be confirmed with ENTER key. New record will get unique ID.
4. New or modified record will be confirmed by information at bottom bar if all values are correct.
5. Record without all correct data will not be stored(no information at bottom bar).
6. By set used record as UNFINISHED, will clear all information about progress, however record will be marked as
FOUND if any of remote computers which still calculating will find SL3 Value.
7. If any of remote computer will disconnect accidentially, server will NOT cancel used part byself




1. For KKSL3 Cloud Server activation KKDongle Serial Number required
2. KK exe and KK Sl3 Cloud Server working on same dongle
3. First start KKSL3 Cloud (Sl3 Cloud license add to same folder with server exe), next start KKMC exe
4. Read IP for PC with KKSL3 Cloud Server
5. Enter SL3 Cloud Server IP to KKMC exe (SL3 setings)
5. Make password by SL3Cloud server and paste to KKMC exe (SL3 setings)
6. Add limit PC in SL3 Cloud server (setings)
7. Enter "Save Setings' button
8. Go to Database and add log by "Read LOG" button or paste IMEI+HASH (by ENTER you save record)
9. Click start button
10. In KKMC click "Sl3 Setings" button and select "enable SL3 cloud computing"
11. Back to normal KKMC exe and click "Execute"
12. If all firewell and other protection closed KKMC start calclate data from SL3 Cloud Server


Best Regards ! GSMinfo !

[GSM SKILS]

thax for add nano box to use this saver

how log it will take for one phone?

thanx

[trust4eve83]

gud job very nice info thanx

[goodname]

cool kk team keep it up

[hassan riach]

gud job very nice info thanx

[D4R10]

could you make some kind of contact list so we can add email field from names in it? thanks

[gsminfo]

Originally Posted by D4R10

could you make some kind of contact list so we can add email field from names in it? thanks

Yes. System send meail with cod to your customer after code finding.
Availble in Ver 1.2

[D4R10]

i saw that....but don't have contact list system so we can store regular customers emails and when adding log to queue select in list of customers whose log is to send to him...

[gsminfo]

Add by ctrl C ctrl V .
How problem ?

[D4R10]

it's ok when have 2-3 logs to use copy/paste....but when u add 20-30 logs from different customers it's not that handy....

[datalife2000]

sorry i need more explanation!!!.....

if it takes 3 days for 1 sl3 supercomputer to calculate cod. does this mean it will now take at most 1 day for 3 networked sl3 supercomputers if we use this software?

also how about if we have 10 networked sl3 supercomputers?

sorry for lagging behind and thanks in advance

[usernome]

hi,
i need to pay 50$ for 10 computers and 10 kk keys for each system,
1550$ is to much for this software.

with 200$ i have custom software.


kk you are too greedy.

[Malik Irfan85]

good job Gsm info team . . . . .

[naeem janjua]

with 10 computers i need 10 kk dongles and one cloud activation for 50 €.
is this right?

[7777]

Originally Posted by naeem janjua

with 10 computers i need 10 kk dongles and one cloud activation for 50 €.
is this right?

Yes,buddy...............