Tutorial: How to use the Pinout Defining Feature of UCT Box using Fusion Software

[nonu_don]

Tutorial: How to use the Pinout Defining Feature of UCT Box using Fusion Software



Q. What is the difference between Pin-Find and Pin-Define ?
A. Pin-Find is to find out the pinouts of the handset. Means which pins are Rx, Tx, Ground, Vcc at the mobile phone connector. Whereas Pin-Define means to write the Rx, Tx, Ground and Vcc to the defined pins at cable.

Example:
You have a handset, you want to connect it with UCT Box, but you don't know the pinouts of the handset. Then you need to find the pinouts using the Pin-Find feature.
On the other side, you have a handset which you want to connect it with UCT Box and you know the pinouts of this handset. Then you need to define the handset pinouts to the UCT Box so that you can start working on it. Here you need to use the Pin-Define feature.



Step-By-Step guide on how to use the Pin-Define feature of UCT Fusion:
(In this guide we are using an example to define pinouts of Samsung B319 which uses Samsung E210 Combo Cable)

1. Connect the handset with the respective cable (20B) to the UCT Box and start the UCT Fusion software.
2. Press "Definition" in the side bar & select "Standard Mode".
3. Now according to the Samsung E210 pinouts, we need to define the ground on the pin-1 and pin-2, therefore click on 1 and select "GND". similarly click on 2 and select "GND".
4. You can set all other pins similarly. Rxd, Txd, Vcc, USB D-, USB D+, etc.
5. After you are all done, press "Set" on the upper right corner. This will write the command to the UCT Box and pinouts will be defined.

As soon as we click "Set", you can see the USB asking for Samsung drivers, means the cable has been defined and now working as a Samsung USB-Com Combo cable.
You can now open your ET-Plus Software or any other CDMA software to service your handset.

Br.
Naman

[achintya]

I want to set lg gs155 pinout plz help me sir

[.::SAMRAT::.]

what will in case of dead set

[nonu_don]

Originally Posted by .::SAMRAT::.

what will in case of dead set

I dont understand what you are trying to ask sir,
If you asking if pin-defining will work on dead set or not,, then it will work without any problem as for all handsets.

Br.
Naman