uct apredtrum not working

[nawaz ahmed]

please help me


i have purchased a box since 1month back

in this box mtk related mobiles is formatting flashing fine

but spreadtrum related mobiles are not reading and not showing rx tx


i was changed auto usb to 6600 usd and all but no way

please give the perfect solution sir........

[murari-GSM]

Hai
see video tutorial section and change 6600l com boot trai again solve your problem

[nonu_don]

Originally Posted by nawaz ahmed

please help me

i have purchased a box since 1month back
in this box mtk related mobiles is formatting flashing fine
but spreadtrum related mobiles are not reading and not showing rx tx

i was changed auto usb to 6600 usd and all but no way
please give the perfect solution sir........

Sir,
working with SpreadTrum handsets is totally different than MTK handsets. it can be posible that you using the same procedure on SPD handsets that of mtk handsets. this is why i request you to please check the manual again and learn how to connect spd handsets.

If u still have problem, then please post full problem with posible screenshots.
Br.
Naman

[nonu_don]

Easy instructions on "How to connect & use UCT Box with SpreadTrum CPU based handsets"

SpreadTrum CPU have different boot mode according to there CPU Type. Which is why it is important to select the correct boot mode for proper connectivity with the software. It might be posible that you can read info and flash with wrong selection, but for write flash need to select correct boot mode.


Correct Steps to connect and work on a SpreadTrum CPU based handset:

1. First u need to read information of the handset. Go to “SpreadTrum” tab, select “ReadInfo”, select option according to CPU type. If you don't know the CPU boot type then you can try “Auto-USB”, “Auto-COM”, “6600L-USB" or "6600L-COM" one-by-one.
2. Press “Start”.
3. Now you don't need to power on the phone in SPD handsets. It will automatically start sensing the pinouts. After finding the pinouts the phone will ask for usb drivers. SPD drivers are located under folder “SpreadTrum_USB_Driver”. If you have already installed the drivers then system will not ask for drivers next time.
4. After installing drivers, software will connect to your SpreadTrum handset and will read information which will be displayed on the bottom.
5. You can now read in it that which type is the CPU and flash memory of the handset. Example: CPU: SC6600E-xxxx Flash: NAND_xxxx Here the CPU type is 6600E and the memory type in NAND, so in this case you need to select the option “6600M/E/I-NAND” and then proceed further.
6. After you have selected the correct CPU type in the options, now you can start with Format, Read Flash, Write Flash, Repair IMEI, etc.

for more guides, please download latest manual from here : User Instructions Manual for UCT in English & Hindi !!!
You can download the video manual from here : http://www.uct.cc/temp/UCT_Box_Sprea...t_Tutorial.mp4


Br.
Naman

[nonu_don]

Please download the New Setup UCT Box v4.41a from support area. This will fix all the connectivity issues with some MTK & SPD handsets.

• Mirror 1: Mediafire.com
• Mirror 2: UCT.cc
• Mirror 3: Rapidshare.com
• Mirror 4: Mirrorcreator.com
• Mirror 5: filesonic.in
• Mirror 6: depositfiles.com
• Mirror 7: ziddu.com
• Mirror 8: bitshare.com
• Mirror 9: crocko.com
• Mirror 10: megaupload.com
• Mirror 11: mediafire.com
• Mirror 12: hotfile.com
• Mirror 13: gamefront.com
• Mirror 14: enterupload.com
• Mirror 15: filekeen.com
• Mirror 16: wupload.com
• Mirror 17: 2shared.com

Always make sure u use the latest version for UCT Box.
Also you need to make sure that correct date and time have been put in your system.

Current latest version for UCT Box: v4.41a Released on 3rd Jan 2012 : 03/01/12 : UCT v4.41 Released - New Flash ID's, Software Restriction Fixed & More...

Br.
Naman