Elephone p7000 (mt6752) imei repair done - GSM-Forum

amit kanpur · 10-08-2015, 22:48

ELEPHONE P7000 (MT6752) IMEI REPAIR DONE ...DONE BY COMMAND..

HERE IS PROCESS...

You need to do a factory reset first with the Elephone to make it works.

Type *#*#3646633#*#* to go in engineer menu

Go in Connectivity, then in CDS Information, and finally Radio Information

Chose phone 1 ou phone 2 (depending on where is the sim that you want to modify the IMEI but keep in mind that often, SIM 2 is only GSM)

Type in the first line AT+EGMR without space. A menu should appear giving you the possibility to directly select AT+EGMR=1,7,""
Select it and then add a space between AT+(space)EMGR then, add your new IMEI where it should be ( should look like this AT+ EGMR=1,7,"your IMEI" ). Do SEND AT COMMAND and then, do exactly the same with the space between AT +EMG (so, after AT and not after the +) and validate again.
Now restart and it should had work. You can check by typing *#06#*. For an unknown reason, if I type AT+ EGMR=1,7,"" manually without using the small menu appearing, it's not working..

If it didn't worked, try again from the beginning.

This is for sim 1 AT+ EGMR=1,7,"your IMEI"If you want to modify on SIM2 then you have to useAT+ EGMR=1,10,"your IMEI"

100% working..tested by me
bro..
Amit sharma

10-08-2015, 22:48	#1 (permalink)
amit kanpur No Life Poster Join Date: May 2009 Location: kanpur Age: 35 Posts: 2,443 Member: 1033905 Status: Offline Sonork: amitsharma Thanks Meter: 892	Elephone p7000 (mt6752) imei repair done ELEPHONE P7000 (MT6752) IMEI REPAIR DONE ...DONE BY COMMAND.. HERE IS PROCESS... You need to do a factory reset first with the Elephone to make it works. Type ##3646633## to go in engineer menu Go in Connectivity, then in CDS Information, and finally Radio Information Chose phone 1 ou phone 2 (depending on where is the sim that you want to modify the IMEI but keep in mind that often, SIM 2 is only GSM) Type in the first line AT+EGMR without space. A menu should appear giving you the possibility to directly select AT+EGMR=1,7,"" Select it and then add a space between AT+(space)EMGR then, add your new IMEI where it should be ( should look like this AT+ EGMR=1,7,"your IMEI" ). Do SEND AT COMMAND and then, do exactly the same with the space between AT +EMG (so, after AT and not after the +) and validate again. Now restart and it should had work. You can check by typing #06#. For an unknown reason, if I type AT+ EGMR=1,7,"" manually without using the small menu appearing, it's not working.. If it didn't worked, try again from the beginning. This is for sim 1 AT+ EGMR=1,7,"your IMEI"If you want to modify on SIM2 then you have to useAT+ EGMR=1,10,"your IMEI" 100% working..tested by me bro.. Amit sharma