Firefly Aurii Envy Privacy Protection Problem

[yolem053]

Goods Evening fellow techies I have a problem regarding unlocking anti-theft password on Firefly Aurii Envy. I hope some members here could help me solve this problem.
Problem: Privacy Protection Password activated (anti_theft lock)
Procedure Undertaken: I tried clear theft lock via commerciall but stuck on read phone information success. I also tried onl it says "all done' but the phone is still asking for password.

I tried customize format via this address:
userdata: addr:0xC6800000 --length:0x80380000
format done but anti-theft lock has not been disabled.



Please help me. Thank you

[killme12]

Try it with infinity CM2 MTK module if you have
Just give it a try bro hope it will solve your problem.......

[Diclordifenil]

Hy bro!
if phone have android 5.1.1 or 6.0 many tools fail to remove anti-theft lock. i test many times with nck, volcano and infinity CM2. some times CM2 has solve it. but some time... phone hang on logo many hours. after hard reset phone comes back but anti-theft lock is back.
in many case just full flash from another good phone save me! [full flash .bin read with CM2].
I hope to help! BR!

[yolem053]

Problem solved by flashing with this firmware https://drive.google.com/uc?id=0B7JC...xport=download. Thank you.

[GSM member]

Good day sir. I have the same problem with the aurii envy and flashed a firmware the same to the one you've used but now it is hardbricked. It won't turn on nor charge. I have a 3gb ram 32 rom aurii envy. I use sp flash tools. Did this happen because i flashed with the preloader included?

[yolem053]

Originally Posted by GSM member

Good day sir. I have the same problem with the aurii envy and flashed a firmware the same to the one you've used but now it is hardbricked. It won't turn on nor charge. I have a 3gb ram 32 rom aurii envy. I use sp flash tools. Did this happen because i flashed with the preloader included?

In my case, I did not include the preloader. Open the phone and remove the battery. If still in dead state, try format and flash method. Or look for other firmwares available in the internet.

[GSM member]

Originally Posted by yolem053

In my case, I did not include the preloader. Open the phone and remove the battery. If still in dead state, try format and flash method. Or look for other firmwares available in the internet.

Thanks for the reply. If I have to flash it again, should I put back the battery or remove it as it is. In addition, should I still include the preloader? I surfed the internet searching for another firmware but no good just like from needrom site.

[yolem053]

Originally Posted by GSM member

Thanks for the reply. If I have to flash it again, should I put back the battery or remove it as it is. In addition, should I still include the preloader? I surfed the internet searching for another firmware but no good just like from needrom site.

yes, put the battery back and flash with preloader.

[GSM member]

Originally Posted by yolem053

yes, put the battery back and flash with preloader.

It said "error 4032 ". I can't flash the firmware

[GSM member]

By the way, yours is 3gb ram 32 gb rom version too, right?

[Heartbeat27]

Sir i am how to use this flash tools....? i am a newbie...can i know how..?

[yolem053]

Originally Posted by GSM member

By the way, yours is 3gb ram 32 gb rom version too, right?

Yes......................

[yolem053]

Originally Posted by Heartbeat27

Sir i am how to use this flash tools....? i am a newbie...can i know how..?

use the latest version of SP FLASH TOOL or use your GSM tools that supports MTK flashing.