Help needed in IBALL ANDI 4V PATTERN LOCK - GSM-Forum

amit_varietymob · 05-26-2013, 11:28

IBALL ANDI 4V how to remove pattern lock any idea? tried with many key combinations but no luck. Also driver needed for this handset. Please help.

shahinkp · 11-09-2013, 09:58

use miracle box

select write flash

select .pac file

http://www.amiraclebox.com/miracle/?p=1301

amit_varietymob · 12-23-2013, 17:05

Problem solve with volcano box by formatting. Volume up is the boot key.

krishnadas.g · 03-14-2014, 14:11

plz halppppppp

iball andi 4v pattren lock , hang after format in dragon

plz helpeeee

skvora · 07-03-2014, 09:19

iball andi uddaan hard reset done
[B][/PRESS VOL UP +BACK KEY+POWER
VOL DOWN TO SELECT
PRESS BACK KEY AND MENU KEY SAIMENTENUSLY TO CONFIRM

dineshd · 10-28-2014, 13:25

iball andi 4v format done
no need boot key press
only select spd 6820 cpu read info n format u r set is done

Analyzing USB device, please wait...
Find USB device:SCI USB2Serial (COM3), (VID_1782&PID_4D00)

Internal version: SPRD3
Boot downloaded.
Start boot please wait a moment....
Spreadtrum Boot Block version 1.1
Boot downloaded.
Flash ID: 002C00BC90555600
Flash Type:[Micron] MT29C4G48MAZAPAKD
FLASH LEN:0x20000000
mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 230m(system),150m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory)
Analysis flash internal data successfully.
>>Set to Factory successfully.

05-26-2013, 11:28	#1 (permalink)
amit_varietymob Freak Poster Join Date: Nov 2006 Posts: 403 Member: 399228 Status: Offline Thanks Meter: 66	Help needed in IBALL ANDI 4V PATTERN LOCK IBALL ANDI 4V how to remove pattern lock any idea? tried with many key combinations but no luck. Also driver needed for this handset. Please help.

07-03-2014, 09:19	#5 (permalink)
skvora Junior Member Join Date: Jun 2012 Location: ahmedabad,india Posts: 17 Member: 1768561 Status: Offline Thanks Meter: 4	iball andi uddaan hard reset done [B][/PRESS VOL UP +BACK KEY+POWER VOL DOWN TO SELECT PRESS BACK KEY AND MENU KEY SAIMENTENUSLY TO CONFIRM Last edited by skvora; 07-03-2014 at 09:25.

11-09-2013, 09:58	#2 (permalink)
shahinkp Junior Member Join Date: May 2005 Posts: 30 Member: 145570 Status: Offline Thanks Meter: 3	use miracle box select write flash select .pac file http://www.amiraclebox.com/miracle/?p=1301

12-23-2013, 17:05	#3 (permalink)
amit_varietymob Freak Poster Join Date: Nov 2006 Posts: 403 Member: 399228 Status: Offline Thanks Meter: 66	Problem solve with volcano box by formatting. Volume up is the boot key.

03-14-2014, 14:11	#4 (permalink)
krishnadas.g Freak Poster Join Date: Aug 2008 Location: india,kerala Posts: 193 Member: 836786 Status: Offline Sonork: 1,009 horrold Thanks Meter: 48	plz halppppppp iball andi 4v pattren lock , hang after format in dragon plz helpeeee

10-28-2014, 13:25	#6 (permalink)
dineshd Freak Poster Join Date: Dec 2011 Location: india Posts: 414 Member: 1701545 Status: Offline Thanks Meter: 100	iball andi 4v format done no need boot key press only select spd 6820 cpu read info n format u r set is done Analyzing USB device, please wait... Find USB device:SCI USB2Serial (COM3), (VID_1782&PID_4D00) Internal version: SPRD3 Boot downloaded. Start boot please wait a moment.... Spreadtrum Boot Block version 1.1 Boot downloaded. Flash ID: 002C00BC90555600 Flash Type:[Micron] MT29C4G48MAZAPAKD FLASH LEN:0x20000000 mtdparts=sprd-nand:256k(spl),512k(2ndbl),256k(params),512k(vmjal una),10m(modem),3840k(fixnv),3840k(backupfixnv),51 20k(dsp),3840k(runtimenv),10m(boot),10m(recovery), 230m(system),150m(userdata),60m(cache),256k(misc), 1m(boot_logo),1m(fastboot_logo),3840k(productinfo) ,512k(kpanic),512k(simlock),10m(intmemory) Analysis flash internal data successfully. >>Set to Factory successfully.