LENOVO A706 Hang On Logo, Done!!!(Procedure Inside)

[.:kean:.]

LENOVO A706 Hang On Logo, Done!!!

Thanks To Mr. Google, I Was Able To Find A solution For This...

Procedure:

DL Firmware



1. A memory card is required.

*Boot into Android normally.

*Connect your phone to your PC/Laptop with a USB cable and when
asked (or in USB connection settings), please select USB Mass
storage mode to mount SD card.

*On the root of the memory card, create a folder called "sdfuse".


*Unzip the downloaded firmware, you will get a QSB file.

*Copy the QSB file to the sdfuse folder that we created earlier on the
root of SD card.

2. Note: Please make sure that your phone has atleast 60% power before attempting or beginning upgrade. Or keep charger connected during the process.

3. SD card upgrade process:

*Long press VOL UP + POWER_KEY to enter the droidboot,

*A menu will appear. Select the fourth option, SDUPDATE.

*At the bottom of the screen, you can see the progress and status
of the update

*When you see the message "SDCARD UPDATE SUCCESS!!!", this means
you successfully completed the upgrade process

*Now, reboot your device and hopefully it should be updated.


Screenshots:











Complete Procedure & ORIG Link

[pramoj]

sir if set is hang on logo then how it goes to normal debug mode to copy paste firmware to sd card

[GSM CLINIQUE]

Originally Posted by pramoj

sir if set is hang on logo then how it goes to normal debug mode to copy paste firmware to sd card

copy it via Card reader !after that put the Sdcard on phone