WonderMedia Android Device Analyzer 1.0[BACKUP] - GSM-Forum

shahinur · 03-06-2013, 08:06

HcH WonderMedia Android Device Analyzer 1.0

Information:

Android Device Analyzer (WonderMedia edition) makes backups of the most important envs for e.g. TS/gsensor/camera/battery so you can recover after a bad flash (by entering the values in a terminal like "wmtenv set wmt.parameter 0:43:3:223" for example), more important, it easily shows you what model you are running so you can check if this models is one of Uberoids 250+ supported 8650 models!

A file "model.txt" will be generated on your SD card!

HowTo:

1. Run the Analyzer before you flash your tablet.
2. The Analyzer will dump a file called model.txt on your SD (make sure you insert a SD when running to write it!)
3. Run the CHANGER, select option '30', don't write the ROM to the SD, quit the CHANGER after you've set this model.
4. Open %ROMDIR%\FirmwareInstall\env\env_uboot (preferly with WinVi but notepad should also work fine)
5. Replace all the values the Analyzer has listed on SD:\model.txt in the file FirmwareInstall\env\env_uboot
6. Reflash using this modified env_uboot, you can startup the CHANGER after you've done the modifications and type 'SD' to copy to SD.

Changelog:
v1.0.1
* added gsensor for 8650 dump support

Download:

com.hch.wm.android.device.analyzer.apk v1.00 [186KB]
com.hch.wm.android.device.analyzer.v101.apk v1.01 [186KB]

COPYRIGHT BY HcH

JAIMEVINICIUS · 04-04-2018, 01:54

Very nice post !
I have one Craig "cvd601" Android 4.1.1 TV Stick bricked, just green light flashing does not boot..

03-06-2013, 08:06	#1 (permalink)
shahinur Freak Poster Join Date: Feb 2008 Location: BD Posts: 317 Member: 696456 Status: Offline Thanks Meter: 86	WonderMedia Android Device Analyzer 1.0[BACKUP] HcH WonderMedia Android Device Analyzer 1.0 Information: Android Device Analyzer (WonderMedia edition) makes backups of the most important envs for e.g. TS/gsensor/camera/battery so you can recover after a bad flash (by entering the values in a terminal like "wmtenv set wmt.parameter 0:43:3:223" for example), more important, it easily shows you what model you are running so you can check if this models is one of Uberoids 250+ supported 8650 models! A file "model.txt" will be generated on your SD card! HowTo: 1. Run the Analyzer before you flash your tablet. 2. The Analyzer will dump a file called model.txt on your SD (make sure you insert a SD when running to write it!) 3. Run the CHANGER, select option '30', don't write the ROM to the SD, quit the CHANGER after you've set this model. 4. Open %ROMDIR%\FirmwareInstall\env\env_uboot (preferly with WinVi but notepad should also work fine) 5. Replace all the values the Analyzer has listed on SD:\model.txt in the file FirmwareInstall\env\env_uboot 6. Reflash using this modified env_uboot, you can startup the CHANGER after you've done the modifications and type 'SD' to copy to SD. Changelog: v1.0.1 * added gsensor for 8650 dump support Download: com.hch.wm.android.device.analyzer.apk v1.00 [186KB] com.hch.wm.android.device.analyzer.v101.apk v1.01 [186KB] COPYRIGHT BY HcH

04-04-2018, 01:54	#2 (permalink)
JAIMEVINICIUS Junior Member Join Date: Nov 2006 Posts: 8 Member: 385888 Status: Offline Thanks Meter: 1	Very nice post ! I have one Craig "cvd601" Android 4.1.1 TV Stick bricked, just green light flashing does not boot..