6680 after unlock: Contact retailer

[DonaldDuck69]

Have unlocked 6680, but when phone now start it have "Phone start-up failed. Contact the retailer"

Scan Phone:

================================================
             Basic Phone Information             
================================================
MCU Version: V 04wk47v43.1 26-05-05 RM-36 (c) Nokia.   
IMEI Plain : 3570620073*****
IMEI Spare : A3570620073*****
IMEI SV    : 33570620073*****6F
Phone Model: Nokia 6680
Category   : Imaging Phone
Phone Type : RM-36

================================================
            Extended Phone Information           
================================================
Product Serial Number: SEH826835
Product Code         : 0521140
Basic Production Code: 0516030
MCU SW Version       : V 04wk47v43.1 26-05-05 RM-36 (c) Nokia.
HW Version           : 6010
RFIC Version         : 150a160e
DSP Version          : 04w47v22
AHNE Version         : 21
RETU Version         : 32
TAHVO Version        : 41
Bluetooth ID         : 00:13:FD:FD:C8:57

================================================
               Simlock Information               
================================================
CONFIG KEY    :  0000000000000000
PROVIDER KEY  :  2440700000000000
NETWORK NAME  :  Nokia Default;Finland
LOCK COUNTERS :  KEYPRESS 0/3,  FBUS 0/10
SIMLOCK TABLE :
   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
SIMLOCK STATE :  Not Locked

SIMLOCK_TYPE             : PA_SL1
SIMLOCK_TEST             : PASSED
SECURITY_TEST     : FAILED
      >  Try SX4 "PM AUTH" 
      >  Then Write PM 1 and 309 
PHONE_MODE              : RF INACTIVE


Make sure you have installed the
COMPLETE Flash Package for this Phone...

Goto "Settings" --> "Nokia Settings" and verify that
the Folder where you installed your Flash Files are
in the "PRODUCT PATH TO SCAN" List...

Security Test failed, i have make sx4 pm auth:

================================================
      SX4 Custom Keys Stand Alone Edition       
================================================

>>> : SX4 Auth Successfull
Selected PM File: C:\AdvanceBox Turbo Flasher\Nokia\PM Files\SX4\RM-36.pm
Start Uploading PM...
Field : 1 Sub : 0 Byte(s): 114  - Ok
Field : 1 Sub : 1 Byte(s): 4  - Ok
Field : 1 Sub : 2 Byte(s): 86  - Ok
Field : 1 Sub : 4 Byte(s): 110  - Ok
Field : 1 Sub : 5 Byte(s): 4  - Ok
Field : 1 Sub : 6 Byte(s): 86  - Ok
Field : 1 Sub : 8 Byte(s): 110  - Ok
Field : 1 Sub : 13 Byte(s): 86  - Ok
Field : 1 Sub : 15 Byte(s): 4  - Ok
Field : 1 Sub : 16 Byte(s): 86  - Ok
Field : 1 Sub : 18 Byte(s): 86  - Ok
Field : 1 Sub : 20 Byte(s): 86  - Ok
Field : 1 Sub : 22 Byte(s): 16  - Ok
Field : 1 Sub : 23 Byte(s): 4  - Ok
Field : 1 Sub : 24 Byte(s): 84  - Ok
Field : 1 Sub : 25 Byte(s): 16  - Ok
Field : 1 Sub : 29 Byte(s): 6  - Ok
Field : 309 Sub : 0 Byte(s): 4  - Ok
Field : 309 Sub : 1 Byte(s): 2  - Ok
Field : 309 Sub : 2 Byte(s): 12  - Ok
Field : 309 Sub : 4 Byte(s): 12  - Ok
Field : 309 Sub : 5 Byte(s): 12  - Ok
Field : 309 Sub : 7 Byte(s): 12  - Ok
Field : 309 Sub : 8 Byte(s): 12  - Ok
Field : 309 Sub : 17 Byte(s): 12  - Ok
PM  Upload Done!...

After that same problem, i make softwareupdate and now is ok:

================================================
             Basic Phone Information             
================================================
MCU Version: V 04wk47_m_v14.2.1 09-11-06 RM-36 (c) Noki
IMEI Plain : 3570620073*****
IMEI Spare : A3570620073*****
IMEI SV    : 33570620073*****F
Phone Model: Nokia 6680
Category   : Imaging Phone
Phone Type : RM-36

================================================
            Extended Phone Information           
================================================
Product Serial Number: SEH826835
Product Code         : 0521140
Basic Production Code: 0516030
MCU SW Version       : V 04wk47_m_v14.2.1 09-11-06 RM-36 (c) Noki
HW Version           : 6010
RFIC Version         : 150a160e
DSP Version          : pb04w47v23
AHNE Version         : 21
RETU Version         : 32
TAHVO Version        : 41
Bluetooth ID         : 00:13:FD:FD:C8:57

================================================
               Simlock Information               
================================================
CONFIG KEY    :  0000000000000000
PROVIDER KEY  :  2440700000000000
NETWORK NAME  :  Nokia Default;Finland
LOCK COUNTERS :  KEYPRESS 0/3,  FBUS 0/10
SIMLOCK TABLE :
   Block [1]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [2]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [3]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [4]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [5]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [6]  1:Open 2:Open 3:Open 4:Open 5:Open
   Block [7]  1:Open 2:Open 3:Open 4:Open 5:Open
SIMLOCK STATE :  Not Locked

SIMLOCK_TYPE             : PA_SL1
SIMLOCK_TEST             : PASSED
SECURITY_TEST           : PASSED
PHONE_MODE              : RF INACTIVE

Is this ATF Bug? I have read forum and more have this problem that after unlock phone have contact retailer

[..::Angel::..]

Hi,

Yes is a bug, sorry about it.

BR

[Mr.3.]

delete pm 308 1,2,3,4 from jaf and unlock via rpl

[DonaldDuck69]

Originally Posted by ..::Angel::..

Hi,

Yes is a bug, sorry about it.

BR

Thanks for answer.
Ok next time i use read codes from jaf until fixed update will released