<<<<<<<< ATF JTAG - Box Init Failed - Solution >>>>>>>> - Page 5 - GSM-Forum

reparacentro · 07-19-2014, 13:49

hi.. i do Restore EEPROM, and from this time i can not reactivate my jtag.
and i need use it.. I do not know what happened.. I was using it normally the JTAG.

Default language ID 0x0C0A
JTAG Interface ATF Box Not Activated for JTAG.
Checking ATF JTAG Activation from Server...Cannot Send HTTP Request, Error 0x00002EE2

thanks in advance..

jpmgnanaraj · 08-09-2014, 04:06

previously I was using atf 11.40 that time when am trying to update next version It was not responded . So I tried with EEPROM reset, restore box and update firmware. Again its same problem. So I have uninstalled completetly atf and all of its components> Again installed with 11.00 version. I am getting the same problem. The problem only is I am not able update software version and not able to update important file options.

nawa885 · 08-30-2014, 11:16

pls help atf team ERROR: Invalid Reply Detected... 0xA0

================================================
Driver Version : 00020830
Library Version : 00030207
Box Type : AdvanceBox Turbo
Box Firmware : LogiCore 11.0.00
Software Version : v11.60
AdvanceBox SN : 9C62E7D18ABE94BD93C64F78
Box Status : ACTIVATED
================================================
Box Successfully Initialized
================================================

VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

///////// /// /// /////// /////// /////////
/// /// /// /// // /// /// /// ///
/// /// /// /////// /////// /// ///
/// /// /// /// /// /// /// /// ///
/// ///// /// /// /////// //////

=======================================
/// /// /// ///////// /////// //////
///// /// /// /// /// // /// ///
/// ///// /// /// /////// /// ///
/// //// /// /// /// /// /// ///
/// /// /// /// /// /// //////
=======================================

ERROR: Invalid Reply Detected... 0xA0

ERROR: Invalid Reply Detected... 0xA0

ERROR: Invalid Reply Detected... 0xA0

nawa885 · 08-30-2014, 11:19

Default language ID 0x0409
JTAG Interface ATF Box Not Activated for JTAG.
Checking ATF JTAG Activation from Server...

kovangsm5 · 09-02-2014, 14:16

pls help me im actinet paypal not working pls
Transaction ID #0J308643XR254841M)
ATF pls check

BekoMobil · 09-28-2014, 20:00

i have activated jtag but now ask me to activate again,i purchased my box whith activated jtag,,,,solve my problem, my sn is,FAEC046DD98E30368973AF60

aiytz · 10-24-2014, 01:32

i forgot my serial #..
Serial no. E428C26E8D1B1A7DFB150E40

Transaction details:

Description Unit price Qty Amount
ATF Jtag Credits
ATF Jtag Credits: ATF Jtag Credits $39.00 USD 1 $39.00 USD
Total: $39.00 USD
From amount: P1,812.83 PHP
To amount: $39.00 USD
Exchange rate: 1 PHP = 0.0215133 USD
Receipt No: 0879-5819-5468-6231
Please keep this receipt number for future reference. You'll need it if you contact customer service at Digi-Electronics Technology Ltd or PayPal.

Yours sincerely,
PayPal

germankurylo · 11-02-2014, 02:13

mu box error: update firmware.... requesting for box firmware..... open messajeAboxA this error "$

Noder · 11-07-2014, 12:49

Hello, I bougth ATF JTAG, use ATF Store.
Software Version : v11.70
AdvanceBox SN : BA7E32E8ABA864AA87D5D1BB
Box Status : ACTIVATED
JTAG Module: NOT ACTIVATED
JTAG Module Activation Cost: 39 Credits

ERROR: You DO NOT HAVE enough Credits!
Purchase JTAG Credits at ATF Store

But JTAG not activated yet.
Can you help me?

Nonnegativ · 11-14-2014, 10:07

After EEPROM restore:

Advance Turbo Flasher Found
================================================
Driver Version : 00021000
Library Version : 00030207
Box Type : ATF Nitro
Box Firmware : LogiCore 11.0.00
Software Version : v11.40
AdvanceBox SN : 86E8964DE4737286A645903C
Box Status : ACTIVATED

************ ATF Box EEPROM Updated ************
Please Restart ATF Software...

Install NEW ATF Box Drivers if needed...
************ ATF Box EEPROM Updated ************

ATFJ 1.0.8:

Default language ID 0x0406
JTAG Interface ATF Box Not Activated for JTAG.
Checking ATF JTAG Activation from Server...Activation Not Available

Paypal ID: 2MW80163BX9839846

Can you check activation status ?

Isha.786 · 11-14-2014, 11:15

It intially says this but if u wait for a second it will start working

Isha.786 · 11-14-2014, 12:16

Can u please explain the solution

GKILL2K7 · 11-19-2014, 23:52

Hi does anyone can help me , I have still got my nitro ATF which is not JTAG activated
here is my serial C10E8EA8EB69DDFADD7651D7
thank you , I have paid via paypal.
transaction number of payment is 19R20397R29225115 made on 08/19/14

sahshirshak · 11-20-2014, 11:10

Dear Sir,
I have paid for 39 credits for Jtag activation.
ATF sr no: 8F489D4FCAF7B03CB2B88882

But the same is not activated till now. Amount has already been deducted from our account. INR: 2513.35/-

mdarifvahit · 11-26-2014, 22:40

Dear Sir,
I have paid for 39 credits for Jtag activation.
ATF serial no: BDA1101ECAF1A3BEEFEB1A31
But the same is not activated till now. Amount has already been deducted from our account.
Please help me....................

07-19-2014, 13:49	#61 (permalink)
reparacentro Insane Poster Join Date: Jun 2014 Location: Spain Posts: 62 Member: 2210330 Status: Offline Thanks Meter: 21	help hi.. i do Restore EEPROM, and from this time i can not reactivate my jtag. and i need use it.. I do not know what happened.. I was using it normally the JTAG. Default language ID 0x0C0A JTAG Interface ATF Box Not Activated for JTAG. Checking ATF JTAG Activation from Server...Cannot Send HTTP Request, Error 0x00002EE2 thanks in advance..

08-09-2014, 04:06	#62 (permalink)
jpmgnanaraj Junior Member Join Date: Jan 2007 Posts: 32 Member: 429938 Status: Offline Thanks Meter: 0	atf software update not respond previously I was using atf 11.40 that time when am trying to update next version It was not responded . So I tried with EEPROM reset, restore box and update firmware. Again its same problem. So I have uninstalled completetly atf and all of its components> Again installed with 11.00 version. I am getting the same problem. The problem only is I am not able update software version and not able to update important file options.

11-14-2014, 11:15	#71 (permalink)
Isha.786 Junior Member Join Date: Nov 2014 Location: new delhi Posts: 27 Member: 2292662 Status: Offline Thanks Meter: 1	ATF Slotion It intially says this but if u wait for a second it will start working

11-20-2014, 11:10	#74 (permalink)
sahshirshak Major Poster Join Date: Apr 2005 Age: 44 Posts: 42 Member: 133116 Status: Offline Thanks Meter: 1	www.advance-box.com/jtag/ Dear Sir, I have paid for 39 credits for Jtag activation. ATF sr no: 8F489D4FCAF7B03CB2B88882 But the same is not activated till now. Amount has already been deducted from our account. INR: 2513.35/-

08-30-2014, 11:16	#63 (permalink)
nawa885 Major Poster Join Date: Feb 2008 Location: sri lanka Posts: 40 Member: 707667 Status: Offline Thanks Meter: 2	pls help atf team ERROR: Invalid Reply Detected... 0xA0 ================================================ Driver Version : 00020830 Library Version : 00030207 Box Type : AdvanceBox Turbo Box Firmware : LogiCore 11.0.00 Software Version : v11.60 AdvanceBox SN : 9C62E7D18ABE94BD93C64F78 Box Status : ACTIVATED ================================================ Box Successfully Initialized ================================================ VBATT Powering Down <<<< VBATT Powering Up >>>> SET VCCIO Level Done SET BSI Load Done ///////// /// /// /////// /////// ///////// /// /// /// /// // /// /// /// /// /// /// /// /////// /////// /// /// /// /// /// /// /// /// /// /// /// /// ///// /// /// /////// ////// ======================================= /// /// /// ///////// /////// ////// ///// /// /// /// /// // /// /// /// ///// /// /// /////// /// /// /// //// /// /// /// /// /// /// /// /// /// /// /// /// ////// ======================================= ERROR: Invalid Reply Detected... 0xA0 ERROR: Invalid Reply Detected... 0xA0 ERROR: Invalid Reply Detected... 0xA0

08-30-2014, 11:19	#64 (permalink)
nawa885 Major Poster Join Date: Feb 2008 Location: sri lanka Posts: 40 Member: 707667 Status: Offline Thanks Meter: 2	Default language ID 0x0409 JTAG Interface ATF Box Not Activated for JTAG. Checking ATF JTAG Activation from Server...

09-02-2014, 14:16	#65 (permalink)
kovangsm5 Junior Member Join Date: Dec 2013 Posts: 3 Member: 2086087 Status: Offline Thanks Meter: 0	pls help me im actinet paypal not working pls Transaction ID #0J308643XR254841M) ATF pls check

09-28-2014, 20:00	#66 (permalink)
BekoMobil No Life Poster Join Date: Jan 2006 Location: skopje Macedonija Posts: 866 Member: 220736 Status: Offline Thanks Meter: 90	i have activated jtag but now ask me to activate again,i purchased my box whith activated jtag,,,,solve my problem, my sn is,FAEC046DD98E30368973AF60

10-24-2014, 01:32	#67 (permalink)
aiytz Junior Member Join Date: Mar 2009 Location: Philippines Posts: 14 Member: 1000485 Status: Offline Sonork: aiytz Thanks Meter: 4	i forgot my serial #.. Serial no. E428C26E8D1B1A7DFB150E40 Transaction details: Description Unit price Qty Amount ATF Jtag Credits ATF Jtag Credits: ATF Jtag Credits $39.00 USD 1 $39.00 USD Total: $39.00 USD From amount: P1,812.83 PHP To amount: $39.00 USD Exchange rate: 1 PHP = 0.0215133 USD Receipt No: 0879-5819-5468-6231 Please keep this receipt number for future reference. You'll need it if you contact customer service at Digi-Electronics Technology Ltd or PayPal. Yours sincerely, PayPal

11-02-2014, 02:13	#68 (permalink)
germankurylo Junior Member Join Date: Aug 2010 Posts: 4 Member: 1360172 Status: Offline Sonork: 000000000000 Thanks Meter: 0	mu box error: update firmware.... requesting for box firmware..... open messajeAboxA this error "$

11-07-2014, 12:49	#69 (permalink)
Noder Registered User Join Date: Jun 2014 Posts: 1 Member: 2200052 Status: Offline Thanks Meter: 0	Hello, I bougth ATF JTAG, use ATF Store. Software Version : v11.70 AdvanceBox SN : BA7E32E8ABA864AA87D5D1BB Box Status : ACTIVATED JTAG Module: NOT ACTIVATED JTAG Module Activation Cost: 39 Credits ERROR: You DO NOT HAVE enough Credits! Purchase JTAG Credits at ATF Store But JTAG not activated yet. Can you help me?

11-14-2014, 10:07	#70 (permalink)
Nonnegativ Junior Member Join Date: Nov 2014 Posts: 3 Member: 2292633 Status: Offline Thanks Meter: 0	After EEPROM restore: Advance Turbo Flasher Found ================================================ Driver Version : 00021000 Library Version : 00030207 Box Type : ATF Nitro Box Firmware : LogiCore 11.0.00 Software Version : v11.40 AdvanceBox SN : 86E8964DE4737286A645903C Box Status : ACTIVATED ********** ATF Box EEPROM Updated ******** Please Restart ATF Software... Install NEW ATF Box Drivers if needed... ******** ATF Box EEPROM Updated ********** ATFJ 1.0.8: Default language ID 0x0406 JTAG Interface ATF Box Not Activated for JTAG. Checking ATF JTAG Activation from Server...Activation Not Available Paypal ID: 2MW80163BX9839846 Can you check activation status ?

11-14-2014, 12:16	#72 (permalink)
Isha.786 Junior Member Join Date: Nov 2014 Location: new delhi Posts: 27 Member: 2292662 Status: Offline Thanks Meter: 1	Can u please explain the solution

11-19-2014, 23:52	#73 (permalink)
GKILL2K7 Junior Member Join Date: Nov 2013 Location: Shinjuku Age: 47 Posts: 12 Member: 2064266 Status: Offline Thanks Meter: 0	Hi does anyone can help me , I have still got my nitro ATF which is not JTAG activated here is my serial C10E8EA8EB69DDFADD7651D7 thank you , I have paid via paypal. transaction number of payment is 19R20397R29225115 made on 08/19/14

11-26-2014, 22:40	#75 (permalink)
mdarifvahit Junior Member Join Date: Oct 2008 Location: Karambakkudi Posts: 31 Member: 881211 Status: Offline Sonork: mdarifvahit Thanks Meter: 11	Dear Sir, I have paid for 39 credits for Jtag activation. ATF serial no: BDA1101ECAF1A3BEEFEB1A31 But the same is not activated till now. Amount has already been deducted from our account. Please help me....................