GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > Advance-Box


 
 
LinkBack Thread Tools Display Modes
Old 01-18-2011, 15:10   #1 (permalink)
No Life Poster
 
kabul's Avatar
 
Join Date: Jan 2007
Posts: 4,633
Member: 433097
Status: Offline
Sonork: 100.1661890
Thanks Meter: 8,074
ATF v6.50 C1-01 RM-607 USB Flashing problem


Flash usb C1-01 still display Test mode not in factory reset

please help me urgent ATF


Code:
 
Number of Image Files: 3
Processing Image File : 
rm607__03.35.mcusw
Processing Image File : 
rm607__03.35.ppm_m_c
Processing Image File : 
rm607__03.35.image_m_c_0595609
 
AUTO SELECTED DEAD USB FLASHING...
If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...
1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..
 
Infineon USB Boot: F00A1FB300020303010100FF
Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Setting Transmission Speed Done...
Flash Chip Manufacturer: Intel Electronics Corp.
Flash Boot Successful...
 
 
Current File : rm607__03.35.mcusw
Image Type : Main Firmware
Sections : 05
Compile Name: rm607__03.35.mcusw_ebl_psi.fls
Data Size : 26217904 Bytes
Sending Certificate Block
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 05
FIRMWARE Erase Block: 0x40000000~0x4001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: A830
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02 of 05
FIRMWARE Erase Block: 0x40040000~0x4007FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 262144 bytes
Data Checksum: 0000
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 03 of 05
FIRMWARE Erase Block: 0x40080000~0x4009FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: 865C
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 04 of 05
FIRMWARE Erase Block: 0x400A0000~0x4019FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1048576 bytes
Data Checksum: 097B
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 05 of 05
FIRMWARE Erase Block: 0x40400000~0x41BFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 24641536 bytes
Data Checksum: C5EE
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Data Verification Successful...
 
Current File : rm607__03.35.ppm_m_c
Image Type : PPM Image
Sections : 01
Compile Name: package_m_c.ppm_ebl_psi.fls
Data Size : 3254104 Bytes
Sending Certificate Block
PPM Certificate Block Sent Successfully...
Processing Section 01 of 01
PPM Erase Block: 0x41C00000~0x421FFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 3250760 bytes
Data Checksum: 932D
Uploading Data Blocks to phone...
Block Write Successful...
PPM Data Blocks uploaded to phone...
Data Verification Successful...
 
Current File : rm607__03.35.image_m_c_0595609
Image Type : CONTENT Package
Sections : 01
Compile Name: package_m_c_0595609.image.fls
Data Size : 11799824 Bytes
Sending Certificate Block
CONTENT Certificate Block Sent Successfully...
Processing Section 01 of 01
CONTENT Erase Block: 0x42200000~0x43E5FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 11796480 bytes
Data Checksum: E48A
Uploading Data Blocks to phone...
Block Write Successful...
CONTENT Data Blocks uploaded to phone...
Data Verification Successful...
 
Old 01-18-2011, 15:20   #2 (permalink)
No Life Poster
 
.:Zulfiqar:.'s Avatar
 
Join Date: Feb 2010
Location: pakistan(Timergara)
Age: 37
Posts: 921
Member: 1224733
Status: Offline
Thanks Meter: 158
Flash with Fbus cable.
 
Old 01-18-2011, 15:23   #3 (permalink)
No Life Poster
 
gsmfun's Avatar
 
Join Date: Oct 1999
Location: Shenzhen, Hong Kong, Bangkok
Posts: 2,183
Member: 611
Status: Offline
Sonork: 100.33333
Thanks Meter: 29,604
Quote:
Originally Posted by kabul View Post
Flash usb C1-01 still display Test mode not in factory reset

please help me urgent ATF


Code:
 
Number of Image Files: 3
Processing Image File : 
rm607__03.35.mcusw
Processing Image File : 
rm607__03.35.ppm_m_c
Processing Image File : 
rm607__03.35.image_m_c_0595609
 
AUTO SELECTED DEAD USB FLASHING...
If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...
1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..
 
Infineon USB Boot: F00A1FB300020303010100FF
Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Setting Transmission Speed Done...
Flash Chip Manufacturer: Intel Electronics Corp.
Flash Boot Successful...
 
 
Current File : rm607__03.35.mcusw
Image Type : Main Firmware
Sections : 05
Compile Name: rm607__03.35.mcusw_ebl_psi.fls
Data Size : 26217904 Bytes
Sending Certificate Block
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 05
FIRMWARE Erase Block: 0x40000000~0x4001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: A830
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02 of 05
FIRMWARE Erase Block: 0x40040000~0x4007FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 262144 bytes
Data Checksum: 0000
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 03 of 05
FIRMWARE Erase Block: 0x40080000~0x4009FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: 865C
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 04 of 05
FIRMWARE Erase Block: 0x400A0000~0x4019FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1048576 bytes
Data Checksum: 097B
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 05 of 05
FIRMWARE Erase Block: 0x40400000~0x41BFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 24641536 bytes
Data Checksum: C5EE
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Data Verification Successful...
 
Current File : rm607__03.35.ppm_m_c
Image Type : PPM Image
Sections : 01
Compile Name: package_m_c.ppm_ebl_psi.fls
Data Size : 3254104 Bytes
Sending Certificate Block
PPM Certificate Block Sent Successfully...
Processing Section 01 of 01
PPM Erase Block: 0x41C00000~0x421FFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 3250760 bytes
Data Checksum: 932D
Uploading Data Blocks to phone...
Block Write Successful...
PPM Data Blocks uploaded to phone...
Data Verification Successful...
 
Current File : rm607__03.35.image_m_c_0595609
Image Type : CONTENT Package
Sections : 01
Compile Name: package_m_c_0595609.image.fls
Data Size : 11799824 Bytes
Sending Certificate Block
CONTENT Certificate Block Sent Successfully...
Processing Section 01 of 01
CONTENT Erase Block: 0x42200000~0x43E5FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 11796480 bytes
Data Checksum: E48A
Uploading Data Blocks to phone...
Block Write Successful...
CONTENT Data Blocks uploaded to phone...
Data Verification Successful...

Check LCD, see if fail. If LCD fail then this phone can't be factory reset need replace LCD then can do. Thank tips from WAJID.

BR

Thomas
 
Old 01-18-2011, 15:46   #4 (permalink)
No Life Poster
 
kabul's Avatar
 
Join Date: Jan 2007
Posts: 4,633
Member: 433097
Status: Offline
Sonork: 100.1661890
Thanks Meter: 8,074
Sir.
Phone power on will be ok
not in factory reset
 
Old 01-18-2011, 15:51   #5 (permalink)
No Life Poster
 
Advance-Box's Avatar
 
Join Date: Dec 2007
Posts: 7,598
Member: 651945
Status: Offline
Thanks Meter: 20,118
@kabul

Actually can Factory Reset even if phone is in Normal Mode.

Give it a Try :O)

Also Lifetimer is ok in Normal Mode

B/R
 
The Following User Says Thank You to Advance-Box For This Useful Post:
Old 01-18-2011, 15:52   #6 (permalink)
No Life Poster
 
WAJID PNR's Avatar
 
Join Date: Nov 2007
Location: Dubai.
Posts: 1,063
Member: 625961
Status: Offline
Sonork: 100.1590447
Thanks Meter: 1,285
Donate money to this user
Quote:
Originally Posted by kabul View Post
Flash usb C1-01 still display Test mode not in factory reset

please help me urgent ATF


Code:
 
Number of Image Files: 3
Processing Image File : 
rm607__03.35.mcusw
Processing Image File : 
rm607__03.35.ppm_m_c
Processing Image File : 
rm607__03.35.image_m_c_0595609
 
AUTO SELECTED DEAD USB FLASHING...
If Flashing DOES NOT Start in 5 Seconds,
Then Perform Steps 1, 2, 3 and 4...
1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..
 
Infineon USB Boot: F00A1FB300020303010100FF
Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Setting Transmission Speed Done...
Flash Chip Manufacturer: Intel Electronics Corp.
Flash Boot Successful...
 
 
Current File : rm607__03.35.mcusw
Image Type : Main Firmware
Sections : 05
Compile Name: rm607__03.35.mcusw_ebl_psi.fls
Data Size : 26217904 Bytes
Sending Certificate Block
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 05
FIRMWARE Erase Block: 0x40000000~0x4001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: A830
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 02 of 05
FIRMWARE Erase Block: 0x40040000~0x4007FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 262144 bytes
Data Checksum: 0000
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 03 of 05
FIRMWARE Erase Block: 0x40080000~0x4009FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: 865C
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 04 of 05
FIRMWARE Erase Block: 0x400A0000~0x4019FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1048576 bytes
Data Checksum: 097B
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Processing Section 05 of 05
FIRMWARE Erase Block: 0x40400000~0x41BFFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 24641536 bytes
Data Checksum: C5EE
Uploading Data Blocks to phone...
Block Write Successful...
FIRMWARE Data Blocks uploaded to phone...
Data Verification Successful...
 
Current File : rm607__03.35.ppm_m_c
Image Type : PPM Image
Sections : 01
Compile Name: package_m_c.ppm_ebl_psi.fls
Data Size : 3254104 Bytes
Sending Certificate Block
PPM Certificate Block Sent Successfully...
Processing Section 01 of 01
PPM Erase Block: 0x41C00000~0x421FFFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 3250760 bytes
Data Checksum: 932D
Uploading Data Blocks to phone...
Block Write Successful...
PPM Data Blocks uploaded to phone...
Data Verification Successful...
 
Current File : rm607__03.35.image_m_c_0595609
Image Type : CONTENT Package
Sections : 01
Compile Name: package_m_c_0595609.image.fls
Data Size : 11799824 Bytes
Sending Certificate Block
CONTENT Certificate Block Sent Successfully...
Processing Section 01 of 01
CONTENT Erase Block: 0x42200000~0x43E5FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 11796480 bytes
Data Checksum: E48A
Uploading Data Blocks to phone...
Block Write Successful...
CONTENT Data Blocks uploaded to phone...
Data Verification Successful...

change LCD it wil b done ,
tested by me , i did tested two mobiles ,if LCD not good ,phone doesnt get Factory Settings @all.
some time MMC also make this if Phone inside MMC while Flashing..


Br,
WAJID
 
The Following User Says Thank You to WAJID PNR For This Useful Post:
Old 01-18-2011, 15:54   #7 (permalink)
No Life Poster
 
Advance-Box's Avatar
 
Join Date: Dec 2007
Posts: 7,598
Member: 651945
Status: Offline
Thanks Meter: 20,118
Same Like this??




Just select Normal Mode in drop down list
 
Old 01-19-2011, 13:31   #8 (permalink)
No Life Poster
 
software zone's Avatar
 
Join Date: Apr 2007
Location: nothing
Posts: 1,543
Member: 494167
Status: Offline
Thanks Meter: 292
c101 stop flashing at 25%.
 
Old 01-19-2011, 14:23   #9 (permalink)
No Life Poster
 
WAJID PNR's Avatar
 
Join Date: Nov 2007
Location: Dubai.
Posts: 1,063
Member: 625961
Status: Offline
Sonork: 100.1590447
Thanks Meter: 1,285
Donate money to this user
Quote:
Originally Posted by software zone View Post
c101 stop flashing at 25%.
post logs here it will give better answer for u,

try with fully charged Battery , use higher version,post result
 
Old 01-19-2011, 15:19   #10 (permalink)
Crazy Poster
 
Join Date: Feb 2008
Posts: 57
Member: 701340
Status: Offline
Thanks Meter: 2
C1-01.RM-607 by tariq +923336443367.zip - 4shared.com - online file sharing and storage - download
 
Old 01-20-2011, 07:01   #11 (permalink)
No Life Poster
 
software zone's Avatar
 
Join Date: Apr 2007
Location: nothing
Posts: 1,543
Member: 494167
Status: Offline
Thanks Meter: 292
here is full log it stop at 25% i use latest version


1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..


Infineon USB Boot: F00A1FB300020503010100FF
Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Setting Transmission Speed Done...
Flash Chip Manufacturer: Intel Electronics Corp.
Flash Boot Successful...



Current File : rm607__03.35.mcusw
Image Type : Main Firmware
Sections : 05
Compile Name: rm607__03.35.mcusw_ebl_psi.fls
Data Size : 26217904 Bytes

Sending Certificate Block
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 05
FIRMWARE Erase Block: 0x40000000~0x4001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: A830
Uploading Data Blocks to phone...

b4 phone power on only nokia and then whit scree.and after this phone completly dead
 
Old 01-20-2011, 10:02   #12 (permalink)
No Life Poster
 
Advance-Box's Avatar
 
Join Date: Dec 2007
Posts: 7,598
Member: 651945
Status: Offline
Thanks Meter: 20,118
everytime you flash, it hang at 25% ???

I have 2 pieces C1-01 and both of them 100% ok all the time.

Check the problem could be on your side. A customer from saudi arabia
already reported 200 units flashed successfully (and still counting).
 
Old 01-20-2011, 10:14   #13 (permalink)
No Life Poster
 
WAJID PNR's Avatar
 
Join Date: Nov 2007
Location: Dubai.
Posts: 1,063
Member: 625961
Status: Offline
Sonork: 100.1590447
Thanks Meter: 1,285
Donate money to this user
Quote:
Originally Posted by software zone View Post
here is full log it stop at 25% i use latest version


1. Remove USB and Battery...
2. Insert USB.
3. Insert Battery. (Some phones boot automatically)
4. Please Power on phone shortly..


Infineon USB Boot: F00A1FB300020503010100FF
Sending PBL...
PBL Successfully Sent...
Sending SBL...
SBL Successfully Sent...
Setting Transmission Speed Done...
Flash Chip Manufacturer: Intel Electronics Corp.
Flash Boot Successful...



Current File : rm607__03.35.mcusw
Image Type : Main Firmware
Sections : 05
Compile Name: rm607__03.35.mcusw_ebl_psi.fls
Data Size : 26217904 Bytes

Sending Certificate Block
FIRMWARE Certificate Block Sent Successfully...
Processing Section 01 of 05
FIRMWARE Erase Block: 0x40000000~0x4001FFFE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 131072 bytes
Data Checksum: A830
Uploading Data Blocks to phone...

b4 phone power on only nokia and then whit scree.and after this phone completly dead

check inside memory card while flashing mobile,
if hav remove memory card then try . connect usb direct from pc(dnt use usb hub).
post result
i did flashed many c1-01 till nw..


Br.
WAJID
 
Old 01-21-2011, 09:22   #14 (permalink)
No Life Poster
 
software zone's Avatar
 
Join Date: Apr 2007
Location: nothing
Posts: 1,543
Member: 494167
Status: Offline
Thanks Meter: 292
already tryd on tow pc but same problem.not working have some bugs
 
Old 01-22-2011, 11:52   #15 (permalink)
No Life Poster
 
WAJID PNR's Avatar
 
Join Date: Nov 2007
Location: Dubai.
Posts: 1,063
Member: 625961
Status: Offline
Sonork: 100.1590447
Thanks Meter: 1,285
Donate money to this user
Quote:
Originally Posted by software zone View Post
already tryd on tow pc but same problem.not working have some bugs
if u have another c1-01 try to flash with same pc and same file
check there is any error,
if nt its phone prblm
if same check flash file .
i did done more than 25pices
still doin without any error........

br
WAJID
 
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
need to flash 6110 paulomt1 Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 2 08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new Tomas Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 8 10-14-2017 19:29
5110 flash new software , need help steve Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 4 01-03-2015 05:41
HELP: Problem with 5110 Xabi Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L ) 1 07-16-1999 00:44

 



All times are GMT +1. The time now is 19:57.



Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.30465 seconds with 9 queries

SEO by vBSEO