Can't flash Lumia 610 RM-835 - Data Rejected at SEQ 0x151 - GSM-Forum

degsmfan · 08-28-2012, 17:13

Not really sure what I'm doing wrong. I have installed the drivers as instructed on the forum..... and couldn't find anything in the way of an answer to this particular problem.

Would appreciate some help, it has been driving me mad over the course of the day

Here is a screenshot...

and the log

Code:

Windows Phone Flashing Started

AMSS File Found:
 RM835_12w16_prod_generic_amss.esco
WPOS File Found:
 RM835_12160_prod_319_01_boot.esco
USER AREA ERASE File Found:
 RM835_12w16_prod_generic_user_area_erase.esco
WARNING: OSBL File is not Loaded
WARNING: MODEM ADSP File is not Loaded
                                                      
======================================================
             Windows Phone Lumia Flasher              
======================================================
                                                      
If the Phone is ALIVE                                 
  1. Power On the Phone and Connect it to the USB Port
                                                      
If the Phone is DEAD                                  
  1. Press and Hold the VOLUME UP button              
  2. Connect it to the USB Port while still Pressing  
     the VOLUME UP button                             
  3. Continue to Press the VOLUME UP button for 8 more
     seconds                                          
======================================================
                                                      

================================================
             Basic Phone Information             
================================================
SW Version             : 1066.0000.8773.12160
IMEI Plain               : 359313042581128
HW Version            : 112.1569.1.0
Product Code         : 059P4D7
Basic Product Code: 059L3R3
Module Code          : 0205127
PSN Number           : 03F4194AB
NCSD Version         : 1.9

================================================
            Extended Phone Information           
================================================
Public ID           : 712071A9573134910495053BEFEDD5FD
Wireless Lan ID: 3C:36:3D:73:61:6A:00:00
Bluetooth ID     : 3C:36:3D:71:CF:12:00:00:FF:FF:FF:FF

Rebooting to OSBL MODE

Sending AMSS Certificate
HASH: 0A3B18ABC63D2CF5A23BEBC1500E56E22163B717
Certificate Size: 449 Bytes
Status     : WRITE AMSS CERTIFICATE SUCCESS

Sending AMSS Data Blocks
(Please Wait for 25 Seconds...)
Status     : AMSS WRITE SUCCESS

Sending WPOS Certificate
HASH: 0A3B18ABC63D2CF5A23BEBC1500E56E22163B717
Certificate Size: 1460 Bytes

ERROR: Data Rejected at SEQ 0x151
Status     : WRITE WPOS CERTIFICATE FAILED

degsmfan · 08-30-2012, 07:57

Well updated the software to V9.02. The "download latest version" button on advance-box.com is a little misleading I suppose...?!

Seem to be getting several errors from the software now and again as other members have mentioned on the forum.

Double/tripple checked drivers, one time i did see a zuneSomeThingOrOther process in the task manager. Killed it. With my hope renewed.... It failed again.

Tried different versions of the flash files, different computers, even several RM-835's.

Is this the correct place for the official support?

degsmfan · 09-03-2012, 09:24

Bump.....

Product supporters.....?

Did i miss something really obvious? Is that why I have no answer?

srinibas · 09-03-2012, 09:31

Quote:

Originally Posted by degsmfan

Bump.....

Product supporters.....?

Did i miss something really obvious? Is that why I have no answer?

Uninstall ATF >>> Keep backup the BACKUP folder > delete ATF folder

Install ATF V9.00 >>> Update to V9.02 >>> Update Important Files

Try to flash

Download link
Offical Hotfile Mirror
Offical Mirrorcreator Mirror

Br - srinibas

degsmfan · 09-03-2012, 13:12

Windows7:

Same Thing again...

Code:

Windows Phone Flashing Started

AMSS File Found:
 RM835_12w16_prod_generic_amss.esco
WPOS File Found:
 RM835_12160_prod_319_01_boot.esco
USER AREA ERASE File Found:
 RM835_12w16_prod_generic_user_area_erase.esco
WARNING: OSBL File is not Loaded
WARNING: MODEM ADSP File is not Loaded
                                                      
======================================================
             Windows Phone Lumia Flasher              
======================================================
                                                      
If the Phone is ALIVE                                 
  1. Power On the Phone and Connect it to the USB Port
                                                      
If the Phone is DEAD                                  
  1. Press and Hold the VOLUME UP button              
  2. Connect it to the USB Port while still Pressing  
     the VOLUME UP button                             
  3. Continue to Press the VOLUME UP button for 8 more
     seconds                                          
======================================================
                                                      

Sending AMSS Certificate
HASH: 0A3B18ABC63D2CF5A23BEBC1500E56E22163B717
Certificate Size: 449 Bytes
Status     : WRITE AMSS CERTIFICATE SUCCESS

Sending AMSS Data Blocks
(Please Wait for 25 Seconds...)
Status     : AMSS WRITE SUCCESS

Sending WPOS Certificate
HASH: 0A3B18ABC63D2CF5A23BEBC1500E56E22163B717
Certificate Size: 1460 Bytes

ERROR: Data Rejected at SEQ 0x151
Status     : WRITE WPOS CERTIFICATE FAILED

I did this....

"Uninstall ATF >>> Keep backup the BACKUP folder > delete ATF folder

Install ATF V9.00 >>> Update to V9.02 >>> Update Important Files

Try to flash "

Then I did the same, though after deleting ATF folder I also removed it via control panel and installed again, updated 9.02, updated the important files....

Now i did get a different skin.... though exactly the same error.

What i do get every now and again are unresponsive script errors from firefox (i have also changed IE to default browser, to see if it helped)

various different files, one for example resource://gre/modules/XPCOMUtils.jsm:320 and :323

with the option to stop the script or to continue it...

again tried in normal and dead mode. No difference

Advance-Box · 09-03-2012, 18:44

@degsmfan

click [CHECK] button to see if your flash files are corrupted or not...

degsmfan · 09-04-2012, 07:20

Quote:

Originally Posted by Advance-Box

@degsmfan

click [CHECK] button to see if your flash files are corrupted or not...

Thanks for your answer, I have done this with all 3 sets of flash files. (2 different versions)

I believe it also does this before flashing with the new version of ATF.

The flash files do not appear to be corrupt, according to ATF.

MPhoneClinic · 09-04-2012, 08:55

Quote:

Originally Posted by degsmfan

Not really sure what I'm doing wrong. I have installed the drivers as instructed on the forum..... and couldn't find anything in the way of an answer to this particular problem.

Would appreciate some help, it has been driving me mad over the course of the day

Here is a screenshot...

and the log

Code:

Windows Phone Flashing Started

AMSS File Found:
 RM835_12w16_prod_generic_amss.esco
WPOS File Found:
 RM835_12160_prod_319_01_boot.esco
USER AREA ERASE File Found:
 RM835_12w16_prod_generic_user_area_erase.esco
WARNING: OSBL File is not Loaded
WARNING: MODEM ADSP File is not Loaded
                                                      
======================================================
             Windows Phone Lumia Flasher              
======================================================
                                                      
If the Phone is ALIVE                                 
  1. Power On the Phone and Connect it to the USB Port
                                                      
If the Phone is DEAD                                  
  1. Press and Hold the VOLUME UP button              
  2. Connect it to the USB Port while still Pressing  
     the VOLUME UP button                             
  3. Continue to Press the VOLUME UP button for 8 more
     seconds                                          
======================================================
                                                      

================================================
             Basic Phone Information             
================================================
SW Version             : 1066.0000.8773.12160
IMEI Plain               : 359313042581128
HW Version            : 112.1569.1.0
Product Code         : 059P4D7
Basic Product Code: 059L3R3
Module Code          : 0205127
PSN Number           : 03F4194AB
NCSD Version         : 1.9

================================================
            Extended Phone Information           
================================================
Public ID           : 712071A9573134910495053BEFEDD5FD
Wireless Lan ID: 3C:36:3D:73:61:6A:00:00
Bluetooth ID     : 3C:36:3D:71:CF:12:00:00:FF:FF:FF:FF

Rebooting to OSBL MODE

Sending AMSS Certificate
HASH: 0A3B18ABC63D2CF5A23BEBC1500E56E22163B717
Certificate Size: 449 Bytes
Status     : WRITE AMSS CERTIFICATE SUCCESS

Sending AMSS Data Blocks
(Please Wait for 25 Seconds...)
Status     : AMSS WRITE SUCCESS

Sending WPOS Certificate
HASH: 0A3B18ABC63D2CF5A23BEBC1500E56E22163B717
Certificate Size: 1460 Bytes

ERROR: Data Rejected at SEQ 0x151
Status     : WRITE WPOS CERTIFICATE FAILED

I got the same issue trying to flash Nokia 800 rm-819

stuck at :
ERROR: Data Rejected at SEQ 0x3
Status : WRITE OSBL CERTIFICATE FAILED

The phone was working fine, just wanted to Debrand it.

please help!!

thanks

degsmfan · 11-08-2012, 16:59

Still have the same problem. Nice to know I'm not the only one though.

piroskapaul · 02-07-2013, 09:43

same problem for me, no solution, I tried everything. ???

piroskapaul · 02-07-2013, 11:47

nobody knows? any possibility

kenybalboa · 10-17-2013, 13:48

HI

i have ver. v10.11 and have same trouble.

here log:

Sending AMSS Certificate
HASH: 0A3B18ABC63D2CF5A23BEBC1500E56E22163B717
Certificate Size: 449 Bytes
Status : WRITE AMSS CERTIFICATE SUCCESS

Sending AMSS Data Blocks
(Please Wait for 25 Seconds...)
Status : AMSS WRITE SUCCESS

Sending WPOS Certificate
HASH: 0A3B18ABC63D2CF5A23BEBC1500E56E22163B717
Certificate Size: 1364 Bytes

ERROR: Data Rejected at SEQ 0x151
Status : WRITE WPOS CERTIFICATE FAILED

Any one know please?

samindapowerson · 06-16-2014, 14:19

use phone product code firmware for flash.i had same error.i just use same product code firmware.problem solved.atf wow

engendro · 06-20-2014, 15:40

hello

same error, I have tried several ways and nothing, the phone up to my logo and did not go there

thanks

luckycool · 07-30-2014, 20:03

same issue ..

any help

06-16-2014, 14:19	#13 (permalink)
samindapowerson No Life Poster Join Date: Dec 2012 Location: SRI LANKA Posts: 570 Member: 1857049 Status: Offline Sonork: 100.1627774 Thanks Meter: 208	use phone product code firmware for flash use phone product code firmware for flash.i had same error.i just use same product code firmware.problem solved.atf wow

07-30-2014, 20:03	#15 (permalink)
luckycool No Life Poster Join Date: May 2005 Location: UK Posts: 1,071 Member: 143848 Status: Offline Thanks Meter: 125	help same issue .. any help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need to flash 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	08-16-2019 19:37
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
The Best Dual Data cable FBUS-M2BUS for your NOKIA 5110 6110	nk.cable	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	10-14-1999 15:33

08-30-2012, 07:57	#2 (permalink)
degsmfan Freak Poster Join Date: May 2008 Posts: 168 Member: 769590 Status: Offline Thanks Meter: 16	Well updated the software to V9.02. The "download latest version" button on advance-box.com is a little misleading I suppose...?! Seem to be getting several errors from the software now and again as other members have mentioned on the forum. Double/tripple checked drivers, one time i did see a zuneSomeThingOrOther process in the task manager. Killed it. With my hope renewed.... It failed again. Tried different versions of the flash files, different computers, even several RM-835's. Is this the correct place for the official support?

09-03-2012, 09:24	#3 (permalink)
degsmfan Freak Poster Join Date: May 2008 Posts: 168 Member: 769590 Status: Offline Thanks Meter: 16	Bump..... Product supporters.....? Did i miss something really obvious? Is that why I have no answer?

09-03-2012, 18:44	#6 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	@degsmfan click [CHECK] button to see if your flash files are corrupted or not...

11-08-2012, 16:59	#9 (permalink)
degsmfan Freak Poster Join Date: May 2008 Posts: 168 Member: 769590 Status: Offline Thanks Meter: 16	Still have the same problem. Nice to know I'm not the only one though.

02-07-2013, 09:43	#10 (permalink)
piroskapaul Junior Member Join Date: Apr 2010 Posts: 34 Member: 1283794 Status: Offline Thanks Meter: 3	same problem for me, no solution, I tried everything. ???

02-07-2013, 11:47	#11 (permalink)
piroskapaul Junior Member Join Date: Apr 2010 Posts: 34 Member: 1283794 Status: Offline Thanks Meter: 3	nobody knows? any possibility

10-17-2013, 13:48	#12 (permalink)
kenybalboa Junior Member Join Date: Feb 2010 Posts: 33 Member: 1232550 Status: Offline Thanks Meter: 7	HI i have ver. v10.11 and have same trouble. here log: Sending AMSS Certificate HASH: 0A3B18ABC63D2CF5A23BEBC1500E56E22163B717 Certificate Size: 449 Bytes Status : WRITE AMSS CERTIFICATE SUCCESS Sending AMSS Data Blocks (Please Wait for 25 Seconds...) Status : AMSS WRITE SUCCESS Sending WPOS Certificate HASH: 0A3B18ABC63D2CF5A23BEBC1500E56E22163B717 Certificate Size: 1364 Bytes ERROR: Data Rejected at SEQ 0x151 Status : WRITE WPOS CERTIFICATE FAILED Any one know please?

06-20-2014, 15:40	#14 (permalink)
engendro Freak Poster Join Date: Nov 2006 Posts: 196 Member: 389266 Status: Offline Thanks Meter: 17	hello same error, I have tried several ways and nothing, the phone up to my logo and did not go there thanks