E5 Dead not able to flash - GSM-Forum

mike67 · 05-10-2012, 19:02

Hi i have E5 it is dead ..trying to flash it but i am getting error with both

Quote:

VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done
AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5
************************************************** ****
TIME STARTS HERE
************************************************** ****
BootFlashModeDCT5Ex Succeeded after 3 Attempts
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0 (0x00) bytes returned
Number of Sub Blocks 7 (0x07)
1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000003
ID DWORD 1 : 00000226
ID DWORD 2 : 00010007
ID DWORD 3 : 600C1921
ID DWORD 4 : 02031104
2 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000C35
3 EM_ASIC_ID 02
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000C30
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 1B50010C
ID DWORD 1 : B4A40344
ID DWORD 2 : BA09F77A
ID DWORD 3 : F43533B9
ID DWORD 4 : 1B7535DC
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 91 6F 75 21 7F 32 08 12 48 B1 5C 38 DF C8 E8 1B
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : E693EF0D
CRC 1 : AC22615B
Checksum 4D
SearchForBootstrap_DCT5..
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAPUv11_2nd.fg
Boot File - Version 011.034.00
Boot File - Revision 0x0003 (3)
eBB5ProtocolType == New
PrepareBootstrapFile_DCT5 replaced "SILO" with "2ND\0"
PrepareBootstrapFile_DCT5 replaced "BOOT_MEDIAX" with "BOOT_MEDIA0"
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Secondary Loader Sent...
TransmissionTypeRequest_DCT5_NewProtocol
TRANSMISSION_TYPE_REQUEST_BB5 GET_PROTOCOLS_BB5
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 3E 00 C0
ERROR: Phone did not respond...
ERROR: Sending Loader Failed...

Please tell me is this hardware or software ,, used both FBUS and USB

If hardware what area should i look into ???

thanks
mik

..::Angel::.. · 05-11-2012, 10:48

@mike67

What about USB Flashing logs ?

mike67 · 05-11-2012, 18:14

Quote:

Originally Posted by ..::Angel::..

@mike67

What about USB Flashing logs ?

SAME ERROR ,,

Code:

17:54:01 : Processing Image File : 
17:54:01 : rm632_071.003_prd.core.fpsx
17:54:01 : CMT Type : BB5
17:54:01 : CMT Algorithm : XSR 1.6
17:54:01 : Secondary Sending Speed    :  650000Hz
17:54:01 : Algorithm Sending Speed    :  6500000Hz
17:54:01 : Program Sending Speed      :  13000000Hz
17:54:01 : Message Reading Speed      :  98000Hz
17:54:01 : Number of Blocks :  477
17:54:01 : Entry Point:  0x01F0
17:54:01 : Page Format : -1
17:54:01 : MAX PAGE : 0x00040000
17:54:01 : 
17:54:01 : Processing Image File : 
17:54:01 : rm632_071.003_C00.01_DEFAULT_prd.rofs3.fpsx
17:54:01 : CMT Type : BB5
17:54:01 : CMT Algorithm : XSR 1.6
17:54:01 : Secondary Sending Speed    :  650000Hz
17:54:01 : Algorithm Sending Speed    :  6500000Hz
17:54:01 : Program Sending Speed      :  13000000Hz
17:54:01 : Message Reading Speed      :  98000Hz
17:54:01 : Number of Blocks :  38
17:54:01 : Entry Point:  0x012C
17:54:01 : Page Format : -1
17:54:01 : MAX PAGE : 0x00040000
17:54:01 : 
17:54:01 : Processing Image File : 
17:54:01 : rm632_071.003_25.01_MEA_A_prd.rofs2.fpsx
17:54:01 : CMT Type : BB5
17:54:01 : CMT Algorithm : XSR 1.6
17:54:01 : Secondary Sending Speed    :  650000Hz
17:54:01 : Algorithm Sending Speed    :  6500000Hz
17:54:01 : Program Sending Speed      :  13000000Hz
17:54:01 : Message Reading Speed      :  98000Hz
17:54:01 : Number of Blocks :  223
17:54:01 : Entry Point:  0x012C
17:54:01 : Page Format : -1
17:54:01 : MAX PAGE : 0x00040000
17:54:01 : 
17:54:01 : Processing Image File : 
17:54:01 : rm632_071.003_U010.000_prd.uda.fpsx
17:54:01 : CMT Type : BB5
17:54:01 : CMT Algorithm : XSR 1.6
17:54:01 : Secondary Sending Speed    :  650000Hz
17:54:01 : Algorithm Sending Speed    :  6500000Hz
17:54:01 : Program Sending Speed      :  13000000Hz
17:54:01 : Message Reading Speed      :  98000Hz
17:54:01 : Number of Blocks :  84
17:54:01 : Entry Point:  0x012C
17:54:01 : Page Format : -1
17:54:01 : MAX PAGE : 0x00040000
17:54:01 : 
17:54:03 : 
17:54:03 : 
17:54:03 : AUTO SELECTED DEAD USB FLASHING...
17:54:03 : 
17:54:03 : If Flashing DOES NOT Start in 5 Seconds,
17:54:03 : Then Perform Steps 1, 2, 3 and 4...
17:54:03 : 
17:54:03 : 1. Remove USB and Battery...
17:54:03 : 2. Insert USB.
17:54:03 : 3. Insert Battery. (Some phones boot automatically)
17:54:03 : 4. Please Power on phone shortly...
17:54:03 : 
17:54:04 : AdvanceFBox SendBootCodeEx
17:54:04 : InitialiseBootstrap_DCT5 DIR
17:54:04 : BootFlashMode_DCT5
17:54:04 :  BootRom Verified!
17:54:04 : 
17:54:04 : BootFlashModeDCT5Ex Succeeded First Time
17:54:04 : SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0  (0x00) bytes returned
17:54:04 : Number of Sub Blocks 7 (0x07)
17:54:04 :   1  SYSTEM_ASIC_ID 01
17:54:04 :      Block Length  : 21  (15)
17:54:04 :      BB ASIC Index : 0  (00)  CMT
17:54:04 :      ID DWORD    0 : 00000003
17:54:04 :      ID DWORD    1 : 00000226
17:54:04 :      ID DWORD    2 : 00010007
17:54:05 :      ID DWORD    3 : 600C1921
17:54:05 :      ID DWORD    4 : 02031104
17:54:05 :   2  EM_ASIC_ID 02
17:54:05 :      Block Length  : 5  (05)
17:54:05 :      BB ASIC Index : 0  (00)  CMT
17:54:05 :      ID DWORD    0 : 00000C35
17:54:05 :   3  EM_ASIC_ID 02
17:54:05 :      Block Length  : 5  (05)
17:54:05 :      BB ASIC Index : 0  (00)  CMT
17:54:05 :      ID DWORD    0 : 00000C30
17:54:05 :   4  PUBLIC_ID 12
17:54:05 :      Block Length  : 21  (15)
17:54:05 :      BB ASIC Index : 0  (00)  CMT
17:54:05 :      ID DWORD    0 : 1B50010C
17:54:05 :      ID DWORD    1 : B4A40344
17:54:05 :      ID DWORD    2 : BA09F77A
17:54:05 :      ID DWORD    3 : F43533B9
17:54:05 :      ID DWORD    4 : 1B7535DC
17:54:05 :   5  ASIC_MODE_ID 13
17:54:05 :      Block Length  : 2  (02)
17:54:05 :      BB ASIC Index : 0  (00)  CMT
17:54:05 :      Mode Id       : 00
17:54:05 :   6  ROOT_KEY_HASH 14
17:54:05 :      Block Length  : 17  (11)
17:54:05 :      BB ASIC Index : 0  (00)  CMT
17:54:05 :      Hash          :  91 6F 75 21 7F 32 08 12 48 B1 5C 38 DF C8 E8 1B 
17:54:05 :   7  ROM_ID 15
17:54:05 :      Block Length  : 9  (09)
17:54:05 :      BB ASIC Index : 0  (00)  CMT
17:54:05 :      CRC         0 : E693EF0D
17:54:05 :      CRC         1 : AC22615B
17:54:05 : 
17:54:05 : START FLASHING
17:54:05 : RawLoaderExtract: rm632_071.003_prd.core.fpsx
17:54:05 : CMT Secondary Loader: C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\BB5_USBLoaders\RAPUv11_2nd.fg
17:54:05 : Secondary Loader Sent....
17:54:31 :                                                   
17:54:31 : ERROR: MCU_CONFIGURATION_RESPONSE is not VALID    
17:54:31 :                                                   
17:54:31 : TIPS:                                             
17:54:31 : 1. Make Sure your Battery Power is Enough...      
17:54:31 : 2. Make Sure Connectivity Drivers are installed...
17:54:31 : 3. DO NOT USE USB HUBS...                         
17:54:31 : 4. Use an ORIGINAL NOKIA CA-101D USB Cable...     
17:54:31 :                                                   
17:54:31 : Flashing Failed....

srinibas · 05-12-2012, 10:14

Please check these points

Make Sure your Battery Power is Enough
Make Sure Connectivity Drivers are installed
DO NOT USE USB HUB
Use an ORIGINAL NOKIA CA-101D USB Cable

Br - srinibas ( ATF Team )

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
6110 power does not stay on	sc~micro	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	6	08-30-2014 08:14
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29

05-11-2012, 10:48	#2 (permalink)
..::Angel::.. No Life Poster Join Date: Dec 2006 Location: Karachi, Pakistan Age: 33 Posts: 16,237 Member: 643472 Status: Offline Sonork: 100.96901 Thanks Meter: 16,589	@mike67 What about USB Flashing logs ?

05-12-2012, 10:14	#4 (permalink)
srinibas No Life Poster Join Date: Apr 2007 Location: M W Balasore,Odisha,INDIA Age: 52 Posts: 12,752 Member: 492222 Status: Offline Sonork: 100.1594126 Thanks Meter: 10,377	Please check these points Make Sure your Battery Power is Enough Make Sure Connectivity Drivers are installed DO NOT USE USB HUB Use an ORIGINAL NOKIA CA-101D USB Cable Br - srinibas ( ATF Team )