[help] lumia 1020 unable to boot

[eivelice]

i am trying to repair lumia 1020 unable to boot on screen

when i try to repair on jtag, this is logs :

 Phone Type  : Lumia 1020
 CPU Type    : Qualcomm MSM8960
 Storage Type: eMMC 32GB
 Procedure   : WP8 FFU Flasher via JTAG
 More Info   : http://www.advance-box.com/ffu_flasher/
==========================================================
1. Make sure JTAG Connection is 100% OK
2. Always Disconnect the Phone BATTERY
3. Connect USB Cable to Phone
4. Connect RJ-45 JTAG Cable to ATF Box
5. Select the Correct Phone Type RM-XXX
6. Use RESET JTAG button to check the JTAG Connection
7. Click RESTORE BOOT button to Start Boot Repairs
----------------------------------------------------------
 
Waiting for Device Connection 15 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...Init Write Error at line 109, Access to Memory Not Completed!
Waiting for Device Connection 15 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...Init Write Error at line 109, Access to Memory Not Completed!
Waiting for Device Connection 15 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...Init Write Error at line 109, Access to Memory Not Completed!
Waiting for Device Connection 15 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...Init Write Error at line 109, Access to Memory Not Completed!

any suggestions? thanks