Hi Team Need Help , Repair Nokia X

[$ktelecom]

Hello Sir

Advance-Box,

I Have Nokia X Dead By Wrong Flash!

I tried to repair by Emmc Adapter ( Direct Connection )

but getting error and , and not able to repair can you guide me

where i am wrong and what is the problem ?? i have smartGsm Cabel


Waiting For Your Responce

Thanks In Advance :-)

[sumatera]

Select cpu type: SmartGSM 4-in-1 adapter
Exynos OFF


BR

[$ktelecom]

Originally Posted by sumatera

Select cpu type: SmartGSM 4-in-1 adapter
Exynos OFF


BR

Hi Thanks For Reply@

yes Exynos is OFF , can you tell where dis option SmartGSM 4 In 1 Adapter ??

dis option should be in new verison ? bcz i am useing 11.40

[$ktelecom]

getting this error ??

================================================== ====
================================================== ====
eMMC Test Point Connection Module
================================================== ====
================================================== ====

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.

ERROR: EMMC WAS NOT Detected! (CMD1)
Check your Test Point Soldering!
CMD1 Reply: 0x00000000

all wire ok already check 2-3 time ?

[digs1025]

try to repair in atf jtag software

[$ktelecom]

i not have activate atf jtag ( want to ask one qustion )

after activation it will be repair or connect bcz i seen many post after boot reapir still dead ?

http://forum.gsmhosting.com/vbb/f609...ponse-1925390/

http://forum.gsmhosting.com/vbb/f609...-dead-1931644/

Thanks For Reply

[VIJAY2U2]

No need JTAG bcz emmc can do it

Just know what is ur set hw ver 1or 2

Write the same ver file using emmc connection

[$ktelecom]

Originally Posted by VIJAY2U2

No need JTAG bcz emmc can do it

Just know what is ur set hw ver 1or 2

Write the same ver file using emmc connection

Hi Dude You Are Right But What About Phone Connect ? v1 and v2 i know and i will be check later but until phone not connect then ?

my problem is phone not connecting in atf all jumper already checked 2-3 time

and i have joint as X-Shadow Says only 4 wire ,no any vcc and vccq

and i am useing usb cabel also

blue- yes
green -yes
brown -yes
red and yellow - yes

here is some screen short of both pletform

emmc Direct



here nokia lumia snapDragon 2,3,4










still no any Reply From P/s And P/m Waiting For Your Reply Its To Urgent

Thanks In Advacne

[sumatera]

Set your ATF seting like this:

http://forum.gsmhosting.com/vbb/10952121-post6.html


BR