how to rapeir cmla key

[multi-box]

i have nokia x7 rm 707
after flash belly hang on only nokia logo
i check sd/cmla key
sd present but cmla key is absent
here is log
Scanning USB Ports...
Operation Cancelled...
Scanning USB Ports...
================================================
Basic Phone Information
================================================
MCU Version: V 79_sr1_11w42.5 25-11-11 RM-707 (c) Nokia
IMEI Plain : 358609041929791
IMEI Spare : A358609041929790
IMEI SV : 33586090419297933F
Phone Model: Nokia X7-00
Category : Classic Phone
Phone Type : RM-707
================================================
Extended Phone Information
================================================
Product Serial Number: MDN417364
Product Code : 059G5C0
Module Code : 0204661
Basic Production Code: 059F8C7
Long Production SN : 0
MCU SW Version : V 79_sr1_11w42.5 25-11-11 RM-707 (c) Nokia
HW Version : 1000
RFIC Version : |Alli_4.3.4
DSP Version : 79_SR1_11w42.5
APE BT Version : HCI Version 4 (rev. 0). LMP Version 4 (rev. 7455). Manufacturer 13.
AHNE Version : 11
APE SW Core Version : 111.030.0609
Variant Version : 111.030.0609111.030.0609.15.01111.030.0609.C05.01
APE Test Version : 0.003
RETU Version : 40
TAHVO Version : 00
APE HW Version : 256
APE ADSP SW Version : 256
Wireless LAN ID : 9C:CA9:62:AD:C7
Bluetooth ID : 9C:CA9:62:A0:7F
CS Type : GSM850, GSM900, GSM1800, GSM1900, WCDMA I, WCDMA II, WCDMA IV, WCDMA V, WCDMA VIII
================================================
Simlock Information
================================================
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2440700000000000
NETWORK NAME : Nokia Default;Finland
LOCK COUNTERS : KEYPRESS 0/3, FBUS 0/10
SIMLOCK TABLE :
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SIMLOCK STATE : Not Locked
SIMLOCK_TYPE : PA_SL3 (15-digit NCK)
SIMLOCK_TEST : PASSED
SECURITY_TEST : PASSED
SECURITY_CODE : ENCRYPTED
CMLA_KEY : ABSENT
SUPER_DONGLE_TEST : PASSED
================================================
SL3 Phone detected
================================================

* Firmware Version Downgrade will KILL PHONE !!!
* Manual Full Erase WILL KILL PHONE!!!
* Simlocks are in PM 120 Only...
* PM 308 is Write Protected...
PHONE_MODE : LOCAL


plz tell me how repair cmla key

[m.aminhaqjoo]

CMLA key is ok . no needs to repair it and what is your phone's Problem.

[Advance-Box]

@multi-box

Phones without CMLA KEY will NEVER be able to Load any BELLE firmware.
You will only get moving dots... then phone shut off.

CMLA Key can be written back, just as long as you have PM 308 backup
before the Phone was FULL ERASED and prepared for downgrading.

For now, you just need to downgrade again to NON-BELLE firmwares.

B.R.

[multi-box]

i macke a full backup
1 rpl backup
2 full pm backup
3 full pp backup
after erase flash eno file
and flash 25ver
after flash set is on after write rpl set is cotact retaler
and not goning to local or test mode
sd not repair
plz tell me how to rpeir sd
bcoz phone no going to local mode

[..::Angel::..]

Originally Posted by multi-box

i macke a full backup
1 rpl backup
2 full pm backup
3 full pp backup
after erase flash eno file
and flash 25ver
after flash set is on after write rpl set is cotact retaler
and not goning to local or test mode
sd not repair
plz tell me how to rpeir sd
bcoz phone no going to local mode

Hi,

Do this:

Backups you already have
Full Erase
Full Flash with 25.xx.xx and it contain already ENO if you download Product Code file
Write RPL backup
Authorize Phone via ATF Network
From PP/PM tab, use StandAlone SX4 Auth and Select your Full PM Backup 0-400

BR

[multi-box]

i do this full erase
write full flash with product code v25
Write RPL backup
Authorize Phone via ATF Network
phone authorize ok
but phone not going to download mode
if phone no going to download mode then how to write pm file
pls tell me how to write pm file if phone not going to local mode

[m.aminhaqjoo]

Originally Posted by multi-box

i do this full erase
write full flash with product code v25
Write RPL backup
Authorize Phone via ATF Network
phone authorize ok
but phone not going to download mode
if phone no going to download mode then how to write pm file
pls tell me how to write pm file if phone not going to local mode

BR flash with ENO file then your phone goes to test/local mode.