how to rebild imei in ATF-BOX - GSM-Forum

niloy2007 · 11-13-2010, 12:39

how to rebild imei in ATF-BOX

niloy2007 · 11-13-2010, 12:51

Advance-Box · 11-13-2010, 12:53

@niloy2007

I cannot see picture.... DCT4 IMEI rebuild ???

niloy2007 · 11-13-2010, 14:47

procedure to rebuild imei sir is wrong or corrected

It is not a Bug or a Problem...

Just connect the phone, then click "Read UEM IMEI" and it will put
the correct 15-digits already on the Text Field and it will select the
correct ASIC type for you...

You cannot enter IMEI Manually because you need the phone to be
connected to ATF Box and ATF Software will ONLY calculate RPL for
phones which are connected to the ATF Box. It will not allow you to
calculate for other people's IMEIs...

GsmUniversal · 11-13-2010, 14:51

rebiuld imei is not supported yet only you can make rpl for dct4 phones...

Advance-Box · 11-13-2010, 17:16

@GsmUniversal

?????

Rebuild IMEI is supported... You can see Big Button beside "Request RPL From Server".
The button is "Write RPL File"

So only need the 3 buttons on the IMEI tab...

1. Read UEM IMEI
2. Request RPL From Server
3. Write RPL File

Then ???????? imei will be ok after writing RPL file...

sahed07860 · 11-13-2010, 17:49

using this method

1. Read UEM IMEI
2. Request RPL From Server
3. Write RPL File

today sucsesfuly done 1110 imei

???????? imei ok after writing RPL file...
thank u all atf team

othman2007 · 11-13-2010, 19:49

Quote:

Originally Posted by Advance-Box

@GsmUniversal

?????

Rebuild IMEI is supported... You can see Big Button beside "Request RPL From Server".
The button is "Write RPL File"

So only need the 3 buttons on the IMEI tab...

1. Read UEM IMEI
2. Request RPL From Server
3. Write RPL File

Then ???????? imei will be ok after writing RPL file...

i can tell you one thing >>

thank you best man

niloy2007 · 11-14-2010, 14:41

[IMG]

[/IMG]

hassanjinja · 11-14-2010, 15:02

Great!!.........................

Br
hassan

mony_valley · 11-14-2010, 20:11

Boot Check, Please wait...
VBATT OFF...
VBATT ON
Setting VBATT Done!...
DCT4 Failed to BOOT
Boot Check, Please wait...
VBATT OFF...
VBATT ON
Setting VBATT Done!...
DCT4 Failed to BOOT

always failed to read uem imei in dct4

what should i do ???

thanks

mony_valley

niloy2007 · 11-15-2010, 06:22

i think hw. problem if not then during booting time press on-off baton.may problem sol.

gulshan-iqbal · 11-15-2010, 08:06

thanks ATF for this addon i just repaired Imei of 6310i successfully

cloud.vandam · 11-15-2010, 11:03

Quote:

Originally Posted by niloy2007

procedure to rebuild imei sir is wrong or corrected

It is not a Bug or a Problem...

Just connect the phone, then click "Read UEM IMEI" and it will put
the correct 15-digits already on the Text Field and it will select the
correct ASIC type for you...

You cannot enter IMEI Manually because you need the phone to be
connected to ATF Box and ATF Software will ONLY calculate RPL for
phones which are connected to the ATF Box. It will not allow you to
calculate for other people's IMEIs...

1st read uem ,request rpl,then write rpl,same like FUFENU. that is good processs,some very smart guy give imie with MXKE in this forum,all you can find them in nokia section,like..this type of title "Free Dct4 RPL by mokles,free rpl only 5 munites by Michel,,,,etc

niloy2007 · 11-16-2010, 06:39

if satisfied press thanks botton

11-13-2010, 12:39	#1 (permalink)
niloy2007 No Life Poster Join Date: Oct 2010 Location: INDIA (WEST BENGAL) Posts: 1,288 Member: 1426012 Status: Offline Sonork: ICQ#618627674 Thanks Meter: 886	how to rebild imei in ATF-BOX how to rebild imei in ATF-BOX

11-13-2010, 12:51	#2 (permalink)
niloy2007 No Life Poster Join Date: Oct 2010 Location: INDIA (WEST BENGAL) Posts: 1,288 Member: 1426012 Status: Offline Sonork: ICQ#618627674 Thanks Meter: 886	how to redild imei in atf -box free-free image view

11-13-2010, 14:47	#4 (permalink)
niloy2007 No Life Poster Join Date: Oct 2010 Location: INDIA (WEST BENGAL) Posts: 1,288 Member: 1426012 Status: Offline Sonork: ICQ#618627674 Thanks Meter: 886	procedure to rebuild imei sir is wrong or corrected It is not a Bug or a Problem... Just connect the phone, then click "Read UEM IMEI" and it will put the correct 15-digits already on the Text Field and it will select the correct ASIC type for you... You cannot enter IMEI Manually because you need the phone to be connected to ATF Box and ATF Software will ONLY calculate RPL for phones which are connected to the ATF Box. It will not allow you to calculate for other people's IMEIs... Last edited by niloy2007; 11-13-2010 at 14:53.

11-13-2010, 17:49	#7 (permalink)
sahed07860 Freak Poster Join Date: Dec 2007 Location: bangladesh, chittagong Posts: 369 Member: 648453 Status: Offline Thanks Meter: 82	1110 rh 70 imei done 100% using this method 1. Read UEM IMEI 2. Request RPL From Server 3. Write RPL File today sucsesfuly done 1110 imei ???????? imei ok after writing RPL file... thank u all atf team

11-14-2010, 14:41	#9 (permalink)
niloy2007 No Life Poster Join Date: Oct 2010 Location: INDIA (WEST BENGAL) Posts: 1,288 Member: 1426012 Status: Offline Sonork: ICQ#618627674 Thanks Meter: 886	[IMG][/IMG]

11-13-2010, 12:53	#3 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	@niloy2007 I cannot see picture.... DCT4 IMEI rebuild ???

11-13-2010, 14:51	#5 (permalink)
GsmUniversal No Life Poster Join Date: Dec 2007 Location: Skype , Sonork Posts: 4,857 Member: 649528 Status: Offline Sonork: 100.1590443 Thanks Meter: 6,958	rebiuld imei is not supported yet only you can make rpl for dct4 phones...

11-13-2010, 17:16	#6 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	@GsmUniversal ????? Rebuild IMEI is supported... You can see Big Button beside "Request RPL From Server". The button is "Write RPL File" So only need the 3 buttons on the IMEI tab... 1. Read UEM IMEI 2. Request RPL From Server 3. Write RPL File Then ???????? imei will be ok after writing RPL file...

11-14-2010, 15:02	#10 (permalink)
hassanjinja No Life Poster Join Date: Mar 2005 Location: UGANDA Age: 50 Posts: 1,417 Member: 126167 Status: Offline Sonork: 100.1591387 Thanks Meter: 5,128	Great!!......................... Br hassan

11-14-2010, 20:11	#11 (permalink)
mony_valley No Life Poster Join Date: Oct 2005 Location: egypt Posts: 1,014 Member: 194207 Status: Offline Sonork: 100.1602647 Thanks Meter: 167	Boot Check, Please wait... VBATT OFF... VBATT ON Setting VBATT Done!... DCT4 Failed to BOOT Boot Check, Please wait... VBATT OFF... VBATT ON Setting VBATT Done!... DCT4 Failed to BOOT always failed to read uem imei in dct4 what should i do ??? thanks mony_valley

11-15-2010, 06:22	#12 (permalink)
niloy2007 No Life Poster Join Date: Oct 2010 Location: INDIA (WEST BENGAL) Posts: 1,288 Member: 1426012 Status: Offline Sonork: ICQ#618627674 Thanks Meter: 886	i think hw. problem if not then during booting time press on-off baton.may problem sol.

11-15-2010, 08:06	#13 (permalink)
gulshan-iqbal No Life Poster Join Date: Nov 2006 Location: Albania,City Under The Castle Age: 47 Posts: 2,545 Member: 388033 Status: Offline Thanks Meter: 693	thanks ATF for this addon i just repaired Imei of 6310i successfully

11-16-2010, 06:39	#15 (permalink)
niloy2007 No Life Poster Join Date: Oct 2010 Location: INDIA (WEST BENGAL) Posts: 1,288 Member: 1426012 Status: Offline Sonork: ICQ#618627674 Thanks Meter: 886	if satisfied press thanks botton

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
news headlines to gsm phone	mos	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	7	05-22-2016 11:42
How can I do a Welcome note for my 6110 a dosn't have any one ?	Viper	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-27-2015 11:57
How to add a language in 51xx/61xx	tati	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	05-21-2013 19:20
How to upload a new firmware...	Brand	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	06-08-2012 18:29
Copy from one 6110 to another	Leif Nielsen	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	1	06-10-1999 22:36