<<<<<<<<IMPORTANT INFORMATION BEFORE YOU TP UNLOCK LUMIA 800 RM-801 or RM-819>>>>>>>> - Page 2 - GSM-Forum

**Advance-Box** · 09-25-2012, 12:29

If it show RED BIG Battery bar will low battery logo,
then just comnect the phone to charger and leave it
there. Check on it again after 30 minutes.

If you have problems powering up the phone, just
press and hold the power button for 12 seconds
then un-press the power button for 3 seconds the
press again the power button for 2 seconds or until
you feel a very faint vibrate for 200 milliseconds.

Also check the TP areas after you removed the wires.

Sometimes the phone will not power up if the wires are
still connected on the PCB.

shahinahmed007 · 09-26-2012, 06:46

Quote:

Originally Posted by Advance-Box

If it show RED BIG Battery bar will low battery logo,
then just comnect the phone to charger and leave it
there. Check on it again after 30 minutes.

If you have problems powering up the phone, just
press and hold the power button for 12 seconds
then un-press the power button for 3 seconds the
press again the power button for 2 seconds or until
you feel a very faint vibrate for 200 milliseconds.

Also check the TP areas after you removed the wires.

Sometimes the phone will not power up if the wires are
still connected on the PCB.

after boot repair now only vibrate

cant flash phone

we( also kabirhossain) have two set after unlock same condition now

all two phone are orange uk locked

please help

**Advance-Box** · 09-26-2012, 07:40

@shahinahmed007

Then check area where you soldered the TP.

Repair boot is using verified writes to the Phone, so it is 100% sure that it is not
corrupted.

If your phone has battery, and boot is ok, then it SHOULD be able to flash it even
if other parts are corrupted (aside from the boot).

If phone cannot flash, then it is a problem with the TP area which you just soldered.

If you power the Button and you dont see "Nokia" Logo, then it means phone cannot
find the valid boot files (probably because you shorted the TP area).

r.i.s.e · 09-26-2012, 08:26

Lumia 800 unlock done

but if i reflash phone by any fw it become lock again. is it normal?

srinibas · 09-26-2012, 10:04

Quote:

Originally Posted by r.i.s.e

Lumia 800 unlock done

but if i reflash phone by any fw it become lock again. is it normal?

he he he .... It is permanent unlock , no effect if you flash it , it will remain unlock .

Br - srinibas

mobile-phone-service · 10-04-2012, 16:10

Quote:

Originally Posted by Advance-Box

For ATF Software 9.12 and above, you DO NOT NEED to follow the instructions below:

Some people have problems with some STOCK Firmware Versions
which does not accept the '00000000' PIN or '0000000000' PUK
Unlock Code after TP Unlock is Performed.

To Make sure you will have a WORRY FREE TP UNLOCK, I strongly
suggest that you should flash your phone to a very specific version.

1. Download NaviFirmEx_v1_6_1_en.zip from:
Downloads - navifirmex - Nokia firmware downloader - Google Project Hosting

Option --> Server --> Nokia Care Suite

2. Download 1750.0805.8773.12220 firmware version for RM-801 OR RM-819

3. Full Flash Phone with newly downloaded firmware

4. TP Unlock Phone and enter '00000000' when asked for SIM PIN Unlock Code.

After phone is unlocked, you can flash phone with any firmware you
want and IT WILL REMAIN UNLOCKED!!!

I dont think so.I did used this firmware i unlocked it works fine.After i flashed again with different firmware and phone ask me for a PIN.This one:00000000 do not work...Any solution?And unlocking time take me about 24 min....
Regards,

rose4u86 · 10-08-2012, 20:31

[IMG]

Uploaded with ImageShack.us[/IMG]

During Unlock This resistor is removed by my mistake after this now phone is stuck at windows phone ... Any Solution?????????????????

Tom_x · 10-10-2012, 09:39

Not prmanent unlock

After TP unlocking, if we flash again, phone not accept 00000000 pin code

btw, sometimes ATF find only 1 byte patching, and sometimes find 2 bit patching
I'm use the amss file from recomended firmware and flash file for phone product code

18:43:12 : Lumia 800/800C Detected
18:43:12 :
18:43:12 : Storage Device Information
18:43:12 : Manufacturer ID: 80
18:43:12 : Application ID : 0000
18:43:12 : Product Name :
18:43:12 : Product Rev : 0C
18:43:12 : Product SN : 00080012
18:43:12 :
18:43:12 : Protection Information
18:43:12 : Write Protect A: OFF
18:43:12 : Write Protect B: OFF
18:43:12 :
18:43:12 :
18:43:12 : Dumping AMSS FAT16 Region
18:43:12 : Please wait for 2-4 Minutes...
18:47:53 : Patch Bit Found...
18:47:53 : Total Patch Bits Found: 1
18:47:53 : Patching AMSS...
18:47:53 : Patch OK!
18:47:53 :
18:47:53 : SP Unlock Done!
18:47:53 :
18:47:53 : PIN: 00000000
18:47:53 : PUK: 0000000000
18:47:53 :
18:47:53 : Total Elapsed Time 00:04:49

-------------------------------------
18:33:20 : Lumia 800/800C Detected
18:33:20 :
18:33:20 : Storage Device Information
18:33:20 : Manufacturer ID: 80
18:33:20 : Application ID : 0000
18:33:20 : Product Name :
18:33:20 : Product Rev : 0C
18:33:20 : Product SN : 00031013
18:33:20 :
18:33:20 : Protection Information
18:33:20 : Write Protect A: OFF
18:33:20 : Write Protect B: OFF
18:33:20 :
18:33:20 :
18:33:20 : Dumping AMSS FAT16 Region
18:33:20 : Please wait for 2-4 Minutes...
18:38:10 : Patch Bit Found...
18:38:10 : Patch Bit Found...
18:38:10 : Total Patch Bits Found: 2
18:38:10 : Patching AMSS...
18:38:11 : Patch OK!
18:38:11 : Patch OK!
18:38:11 :
18:38:11 : SP Unlock Done!
18:38:11 :
18:38:11 : PIN: 00000000
18:38:11 : PUK: 0000000000
18:38:11 :
18:38:11 : Total Elapsed Time 00:04:53

Regards
Tom

shahidchuhdry · 10-10-2012, 17:57

i successfully unlocked lumia 800 orange uk with aft box and HK frimware mentioned in article. it was unlocked i tested it n make some calls but after i flashed UK frimware it is asking pin code again n not accepting 00000000 or 0000000000. now i have 6 attempts left.
please tell me what shud i do? flash it again with HK firmware n unlock it or anything else..????

thanks in advance..

**Advance-Box** · 10-10-2012, 18:22

@shahidchuhdry

If you are using 9.12, just tp unlock it and no need to flash back to hk

shahidchuhdry · 10-11-2012, 15:59

Quote:

Originally Posted by Advance-Box

@shahidchuhdry

If you are using 9.12, just tp unlock it and no need to flash back to hk

thanx dear just wanna know that can we update if there is any available in future without losing the unlock???

mobile-phone-service · 10-13-2012, 09:49

Quote:

Originally Posted by shahidchuhdry

thanx dear just wanna know that can we update if there is any available in future without losing the unlock???

You cant because will lock it back again.....Tested and so called permanent unlock its just temporary....

zenk_011 · 10-17-2012, 05:14

plss help i download latest navifirm v.1_6_1
but i cannot see on list nokia 800 or lumia 800

tnx advance!!

digs1025 · 10-17-2012, 06:45

Quote:

Originally Posted by zenk_011

plss help i download latest navifirm v.1_6_1
but i cannot see on list nokia 800 or lumia 800

tnx advance!!

Option --> Server --> Nokia Care Suite

type 800 on product

shahinahmed007 · 10-20-2012, 13:57

Quote:

Originally Posted by Advance-Box

@shahinahmed007

Then check area where you soldered the TP.

Repair boot is using verified writes to the Phone, so it is 100% sure that it is not
corrupted.

If your phone has battery, and boot is ok, then it SHOULD be able to flash it even
if other parts are corrupted (aside from the boot).

If phone cannot flash, then it is a problem with the TP area which you just soldered.

If you power the Button and you dont see "Nokia" Logo, then it means phone cannot
find the valid boot files (probably because you shorted the TP area).

sorry for late respons.i was busy

now condition is

ERROR: Data Rejected at SEQ 0x3
Status : WRITE OSBL CERTIFICATE FAILED

10-10-2012, 17:57	#24 (permalink)
shahidchuhdry Junior Member Join Date: Dec 2010 Posts: 3 Member: 1460605 Status: Offline Thanks: 0 Thanked 0 Times in 0 Posts	locked again :( i successfully unlocked lumia 800 orange uk with aft box and HK frimware mentioned in article. it was unlocked i tested it n make some calls but after i flashed UK frimware it is asking pin code again n not accepting 00000000 or 0000000000. now i have 6 attempts left. please tell me what shud i do? flash it again with HK firmware n unlock it or anything else..???? thanks in advance..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-25-2012, 12:29	#16 (permalink)
Advance-Box Product Manager Join Date: Dec 2007 Posts: 4,595 Member: 651945 Status: Offline Thanks: 19 Thanked 13,259 Times in 2,249 Posts	If it show RED BIG Battery bar will low battery logo, then just comnect the phone to charger and leave it there. Check on it again after 30 minutes. If you have problems powering up the phone, just press and hold the power button for 12 seconds then un-press the power button for 3 seconds the press again the power button for 2 seconds or until you feel a very faint vibrate for 200 milliseconds. Also check the TP areas after you removed the wires. Sometimes the phone will not power up if the wires are still connected on the PCB.

09-26-2012, 07:40	#18 (permalink)
Advance-Box Product Manager Join Date: Dec 2007 Posts: 4,595 Member: 651945 Status: Offline Thanks: 19 Thanked 13,259 Times in 2,249 Posts	@shahinahmed007 Then check area where you soldered the TP. Repair boot is using verified writes to the Phone, so it is 100% sure that it is not corrupted. If your phone has battery, and boot is ok, then it SHOULD be able to flash it even if other parts are corrupted (aside from the boot). If phone cannot flash, then it is a problem with the TP area which you just soldered. If you power the Button and you dont see "Nokia" Logo, then it means phone cannot find the valid boot files (probably because you shorted the TP area).

09-26-2012, 08:26	#19 (permalink)
r.i.s.e Junior Member Join Date: Feb 2008 Location: Belarus Posts: 15 Member: 703203 Status: Offline Thanks: 2 Thanked 3 Times in 3 Posts	Lumia 800 unlock done but if i reflash phone by any fw it become lock again. is it normal?

10-08-2012, 20:31	#22 (permalink)
rose4u86 No Life Poster Join Date: May 2007 Age: 26 Posts: 1,336 Member: 500858 Status: Offline Sonork: 1589054 Thanks: 106 Thanked 381 Times in 186 Posts	[IMG] Uploaded with ImageShack.us[/IMG] During Unlock This resistor is removed by my mistake after this now phone is stuck at windows phone ... Any Solution?????????????????

10-10-2012, 09:39	#23 (permalink)
Tom_x Freak Poster Join Date: Aug 2000 Location: Hungary Posts: 486 Member: 1815 Status: Offline Thanks: 2 Thanked 3 Times in 3 Posts	Not prmanent unlock After TP unlocking, if we flash again, phone not accept 00000000 pin code btw, sometimes ATF find only 1 byte patching, and sometimes find 2 bit patching I'm use the amss file from recomended firmware and flash file for phone product code 18:43:12 : Lumia 800/800C Detected 18:43:12 : 18:43:12 : Storage Device Information 18:43:12 : Manufacturer ID: 80 18:43:12 : Application ID : 0000 18:43:12 : Product Name : 18:43:12 : Product Rev : 0C 18:43:12 : Product SN : 00080012 18:43:12 : 18:43:12 : Protection Information 18:43:12 : Write Protect A: OFF 18:43:12 : Write Protect B: OFF 18:43:12 : 18:43:12 : 18:43:12 : Dumping AMSS FAT16 Region 18:43:12 : Please wait for 2-4 Minutes... 18:47:53 : Patch Bit Found... 18:47:53 : Total Patch Bits Found: 1 18:47:53 : Patching AMSS... 18:47:53 : Patch OK! 18:47:53 : 18:47:53 : SP Unlock Done! 18:47:53 : 18:47:53 : PIN: 00000000 18:47:53 : PUK: 0000000000 18:47:53 : 18:47:53 : Total Elapsed Time 00:04:49 ------------------------------------- 18:33:20 : Lumia 800/800C Detected 18:33:20 : 18:33:20 : Storage Device Information 18:33:20 : Manufacturer ID: 80 18:33:20 : Application ID : 0000 18:33:20 : Product Name : 18:33:20 : Product Rev : 0C 18:33:20 : Product SN : 00031013 18:33:20 : 18:33:20 : Protection Information 18:33:20 : Write Protect A: OFF 18:33:20 : Write Protect B: OFF 18:33:20 : 18:33:20 : 18:33:20 : Dumping AMSS FAT16 Region 18:33:20 : Please wait for 2-4 Minutes... 18:38:10 : Patch Bit Found... 18:38:10 : Patch Bit Found... 18:38:10 : Total Patch Bits Found: 2 18:38:10 : Patching AMSS... 18:38:11 : Patch OK! 18:38:11 : Patch OK! 18:38:11 : 18:38:11 : SP Unlock Done! 18:38:11 : 18:38:11 : PIN: 00000000 18:38:11 : PUK: 0000000000 18:38:11 : 18:38:11 : Total Elapsed Time 00:04:53 Regards Tom

10-10-2012, 18:22	#25 (permalink)
Advance-Box Product Manager Join Date: Dec 2007 Posts: 4,595 Member: 651945 Status: Offline Thanks: 19 Thanked 13,259 Times in 2,249 Posts	@shahidchuhdry If you are using 9.12, just tp unlock it and no need to flash back to hk

10-17-2012, 05:14	#28 (permalink)
zenk_011 Freak Poster Join Date: May 2009 Location: batangas Philippines Posts: 290 Member: 1030567 Status: Offline Thanks: 537 Thanked 83 Times in 62 Posts	plss help i download latest navifirm v.1_6_1 but i cannot see on list nokia 800 or lumia 800 tnx advance!!