lumia 610 unlock error, help urgent - GSM-Forum

austin0 · 07-15-2014, 15:57

Quote:

Re-Connect USB Cable to Phone...
Connect USB Cable to Phone...OK
USB Connected! Waiting for First Event...OK
Disconnect USB Cable Now...OK
Re-Connect USB Cable to Phone...
Waiting for Device Connection 10 second(s)...Timeout During Operation!Timeout During Operation!
Disconnect USB Cable from Phone (If Connected)
Re-Connect USB Cable to Phone...
Connect USB Cable to Phone...OK
USB Connected! Waiting for First Event...OK
Disconnect USB Cable Now...OK
Re-Connect USB Cable to Phone...
Waiting for Device Connection 10 second(s)...Timeout During Operation!Timeout During Operation!
Disconnect USB Cable from Phone (If Connected)
Re-Connect USB Cable to Phone...
Connect USB Cable to Phone...OK
USB Connected! Waiting for First Event...OK
Disconnect USB Cable Now...OK
Re-Connect USB Cable to Phone...
Waiting for Device Connection 10 second(s)...Timeout During Operation!Timeout During Operation!

always this error

help please

Advance-Box · 07-15-2014, 17:08

@austin0

Try this new method of reading codes from a POWERED ON PHONE

http://forum.gsmhosting.com/vbb/10424476-post6.html

Please READ and FOLLOW INSTRUCTIONS VERY CAREFULLY!

austin0 · 07-15-2014, 17:28

Quote:

JTAG Interface Connected, S/N 0xDAAF4319
Resetting and Exploring JTAG chain...No Devices found in Chain!
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 7/8/2014 10:52:00 PM

================================================== ========
Phone Type : Lumia 610 RM-835 - Supported
: Lumia 610 RM-849 - Supported
: Lumia 610C RM-836 - Supported
: Lumia 510 RM-889 - Supported
: Lumia 510 RM-898 - Supported
: Lumia 505 RM-923 - Supported
Unlock Type : Read PIN and PUK Unlock Codes
Other Notes : Power On Phone before Reading Codes
================================================== ========
1. Make sure JTAG Connection is 100% OK
2. DO NOT Connect a USB Cable to the phone
3. Connect RJ-45 JTAG Cable to ATF Box
4. Connect Phone BATTERY and POWER ON the Phone
5. Wait until WP7 OS is FULLY LOADED showing Main Menu
6. Check that Phone IMEI is valid via *#06#
7. If IMEI is valid, Click READ CODES button then wait...
----------------------------------------------------------

Initializing Connection
Timeout During Operation!

Initializing Connection
Timeout During Operation!

connection not estabised

Advance-Box · 07-15-2014, 17:29

@austin0

Then it simply means your JTAG connection is NOT OK.

Re-Check your soldering and wirings.

07-15-2014, 17:08	#2 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	@austin0 Try this new method of reading codes from a POWERED ON PHONE http://forum.gsmhosting.com/vbb/10424476-post6.html Please READ and FOLLOW INSTRUCTIONS VERY CAREFULLY!

07-15-2014, 17:29	#4 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	@austin0 Then it simply means your JTAG connection is NOT OK. Re-Check your soldering and wirings.