Lumia 620 boot reapir success with great ATF

[ashraf_bcs]

Windows Phone 8/8.1 Flashing Started
Loading Flash Files Please Wait...
[DEAD BOOT REPAIR SUPPORTED]
                                                      
======================================================
          Windows Phone 8/8.1 Lumia Flasher           
======================================================
                                                      
If the Phone is ALIVE                                 
  1. Power On the Phone and Connect it to the USB Port
                                                      
If the Phone is DEAD                                  
  1. Connect Phone to the USB Port                    
  2. Press and Hold the VOLUME DOWN and POWER Buttons 
  3. Wait until the Phone Vibrates Shortly...         
  4. Stop Pressing the Buttons...                     
                                                      
If the Phone is DEAD BOOT                             
  1. Connect Phone to the USB Port                    
  2. Install Correct Drivers:                         
     "Nokia Emergency Connectivity"                   
======================================================
                                                      
Recovery Handle Found! - (WinUSB)
Sending Factory Loader...
Loader Upload Done!
Executing Loader...
Start Loader Done!
Waiting for USB Cycle...
USB Cycle OK!
Device Factory Mode OK!
USB Reconfiguration Done...
eMMC Detected OK...

Extracting Partitions from FFU...
Looking for SBL1...
SBL1 OK
Looking for SBL2...
SBL2 OK
Looking for SBL3...
SBL3 OK
Looking for UEFI...
UEFI OK
Looking for RPM...
RPM OK
Looking for TZ...
TZ OK
Looking for WINSECAPP...
WINSECAPP OK
Extracting Partitions Done!
Start Writing eMMC Blocks at : 0x00000000
Start Writing eMMC Blocks at : 0x01000000
Start Writing eMMC Blocks at : 0x01200000
Start Writing eMMC Blocks at : 0x01400000
Start Writing eMMC Blocks at : 0x01600000
Start Writing eMMC Blocks at : 0x01A00000
Start Writing eMMC Blocks at : 0x01C00000
Start Writing eMMC Blocks at : 0x01E00000
eMMC Write OK!
Closing Partition...
Partition Close OK!
BOOT WRITE DONE!
Waiting for USB Cycle...
USB Cycle OK!
Rebooting Phone...
Nokia Phone Info Mode Initiated...
Please wait upto 15 Seconds for SW Reset
Version: 1.1.1.3
Product Code: 059R6J8
Module Code: 0205404

Continuing Previous Boot...
Please wait upto 30 Seconds for Boot Re-entry

Boot Flash Mode Successful...
Buffers Flushed OK...

Phone Info Query Start...
Blocks Returned: 0x07 Blocks
Block ID 0x01 : 00241000
Block ID 0x02 : 00240000
Block ID 0x03 : 00E90000
Block ID 0x05 : Nokia.MSM8227.P5122.1.2
Block ID 0x0D : 0001
Block ID 0x0F : 0301010100000101FF
Block ID 0x10 : 0100130000
Checking SD Card Size...
Card Size: 0x00000000
Checking Platform Security Status...
Platform Secure Boot Status: Active
Secure FFU EFUSE Status: Active
Debug Status: Active
RDC Status: Not Active
Authentication Status: Not Active
UEFI Secure Boot Status: Active
Checking Secure FFU Mode...
Secure FFU Mode : 
Query Flash App Information...
Flash App Information: 02010F011C00
UEFI App: FLASH APP
Flash App Protocol Version: 1.15
Flash App Implementation Version: 1.28
Query ROOT KEY HASH...
ROOT_KEY_HASH: 67131691EEDD1F38568C7FFAE284FB2621680FEAC833314467E31DAA963D1467
Query PUBLIC ID...
PUBLIC_ID: 39CAB0F7C98FCCEE4FD4E9EA71AF6758A4423638
Query eMMC Info...
EMMC Manufacture ID: TOSHIBA
EMMC Product SN : C81C341B
EMMC_SIZE: 8 Gigabytes
Query Battery Charge Status...
CHARGING_STATUS: Cannot Read in Flash Mode

Sending Image Signatures...
Image Signatures Accepted!
Erasing Data Partition...
Data Partition Erased Successfully
Preparing Buffers for DATA LOOP...
Allocating System RAM OK!
Start Sending DATA BLOCKS...
Finished Sending all DATA BLOCKS!
Exiting FLASH Mode via REBOOT...
Exit FLASH Mode Successful!

Flashing Done!
Total Flashing Time : 00:02:33