LUMIA 920(RM822) jtag after, in qualcomm mode.can't flash. - (SOLVED)

[ken6430841]

use old big boot and new big boot flash .. same problem,can't boot

Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Detecting EMMC #1 ID...Toshiba 032G94, 29.12 GiB
Partition Config: Boot from USER, Boot ACK OFF (0x38)
Boot Bus Config: x1 SDR, Bus Reset to x1 (0x00)
Testing Device Memory...OK
Sending Flash Loader...OK (6023 Op/Sec)
Restoring MBR Data...OK
Restoring GPT Data from AFP...OK
Restoring Partition #1...OK
Restoring Partition #2...OK
Restoring Partition #3...OK
Restoring Partition #4...OK
Restoring Partition #5...OK
Restoring Partition #6...OK
Restoring Partition #7...OK
Restoring Partition #8...OK
Restoring Partition #9...OK
Restoring Partition #10...OK
Completed in 0h 11m 54s. Code Download Speed 240 KiB/sec.
Boot Restore Done!
================================================== ===========
Assemble Phone and Start Normally
If Phone cannot Start, perform USB Firmware Update Procedure
================================================== ===========

[ken6430841]

ffu flash ,can boot.

Waiting for Device Connection 15 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core...OK
Initializing Device...OK
Detecting EMMC #1 ID...11010030333247393400DCD537F340CE
Flash Description: Toshiba 032G94, 29.12 GiB, SN DCD537F3, Apr 1997
Partition Config: Boot from USER, Boot ACK OFF (0x38)
Boot Bus Config: x1 SDR, Bus Reset to x1 (0x00)
Testing Device Memory...OK
Sending Flash Loader...OK (6022 Op/Sec)
FFU File Loaded: RM822_3051.40000.1349.0005_RETAIL_apac_prc_204_05_ 358049_prd_signed.ffu
FFU File CRC-32: Computing, Please wait...0x8BAC2DB3
Analyzing FFU, please wait...OK
Restoring MBR Data...OK
Restoring GPT Data from Backup...OK
Writing "SBL1" area, flash #1, p#0, 0x0001000000, 0x0000017400...OK
Writing "SBL2" area, flash #1, p#0, 0x0001200000, 0x000001C000...OK
Writing "SBL3" area, flash #1, p#0, 0x0001400000, 0x0000050800...OK
Writing "UEFI" area, flash #1, p#0, 0x0001600000, 0x0000101A00...OK
Writing "RPM" area, flash #1, p#0, 0x0001A00000, 0x0000021A00...OK
Writing "TZ" area, flash #1, p#0, 0x0001C00000, 0x0000032400...OK
Writing "WINSECAPP" area, flash #1, p#0, 0x0001E00000, 0x000004C600...OK
Writing "PLAT" area, flash #1, p#0, 0x0003400000, 0x00005D3800...OK
Writing "EFIESP" area, flash #1, p#0, 0x0004000000, 0x00014A5C00...OK
Writing "MMOS" area, flash #1, p#0, 0x0008C00000, 0x00049F2A00...OK
Completed in 0h 7m 20s. Code Download Speed 238 KiB/sec.

[Advance-Box]

@ken6430841


So your problem was solved or still problem?

B.R.

[TBOUY]

I had similar problem after big boot den flash it with ffu file n all was OK
U can try it as said

[ken6430841]

Originally Posted by Advance-Box

@ken6430841


So your problem was solved or still problem?

B.R.

sorry ,now repair ok ,this phone is rm867,
phone Changed the shell(display rm822)