lumia710 unlock pb - GSM-Forum

biguo_gsm · 12-20-2013, 18:40

please atf team help urgent
================================================== ====
eMMC Test Point Connection Module
================================================== ====
================================================== ====

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.

Interface Reset OK!
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 2.7-2.8V, 2.6-2.7V, 2.5-2.6V
2.4-2.5V, 2.3-2.4V, 2.2-2.3V, 2.1-2.2V, 2.0-2.1V
1.9-2.0V

eMMC Boot Information
BOOT PARTITION : USER AREA
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT: DISABLED
PWR_BOOT_CFG_PROT : DISABLED
eMMC FirmW UPDATE : DISABLED

Lumia 710 Detected

eMMC Device Information
Manufacturer ID: 90
Device Type : Embedded BGA
Application ID : 4A
Product Name : HYNIX
Product Rev : 5.13
Product SN : 002F2F0C
Manufactured : January 2011

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 300 ns
TRANS_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Dumping Custom Region
Please wait for some time...
Partition Selected: USER AREA
(eMMC Clock 7500000 Hz)
Patch Bit Found...
Total Patch Bits Found: 1
Patching AMSS...
Patch OK!

SP Unlock Done!

PIN: 00000000
PUK: 0000000000

Total Elapsed Time 00:01:05
Operation Cancelled...

before unlock all working well ,after i unlock my lumia 710 no display just light and also on off button not working ,but when i plug phone to computer usb or charger its vibrate computer detecting phone in normal mode without display ,hav just light and song off lumia .i try flash and succesful flash but same prob no display and on off botton not work
please help team to solved this problem
thks

..::Angel::.. · 12-21-2013, 10:25

Hi, why did you unlock lumia 710 with Test Points? We supports this model unlocking with simple USB cable.
So do NOT use Test Point unlocking next time.
As of now, check Test Point if there are some soldering left on PCB or if something is grounded.

BR

12-20-2013, 18:40	#1 (permalink)
biguo_gsm Freak Poster Join Date: Jul 2008 Posts: 139 Member: 822943 Status: Offline Thanks Meter: 7	lumia710 unlock pb please atf team help urgent ================================================== ==== eMMC Test Point Connection Module ================================================== ==== ================================================== ==== 1. DO NOT USE THE PHONE"S BATTERY 2. Connect the Soldered TP Connections to ATF Box 3. Disconnect the USB Cable and Wait until the the ATF Software will tell you to Connect the USB. Interface Reset OK! eMMC Supported Voltage Range: 3.5-3.6V, 3.4-3.5V, 2.7-2.8V, 2.6-2.7V, 2.5-2.6V 2.4-2.5V, 2.3-2.4V, 2.2-2.3V, 2.1-2.2V, 2.0-2.1V 1.9-2.0V eMMC Boot Information BOOT PARTITION : USER AREA PARTITION ACCESS : R/W USER PARTITION PERM_BOOT_CFG_PROT: DISABLED PWR_BOOT_CFG_PROT : DISABLED eMMC FirmW UPDATE : DISABLED Lumia 710 Detected eMMC Device Information Manufacturer ID: 90 Device Type : Embedded BGA Application ID : 4A Product Name : HYNIX Product Rev : 5.13 Product SN : 002F2F0C Manufactured : January 2011 Card Specific Data CSD_STRUCTURE : Extended SPEC_VERS : Version 4.1/4.2/4.3 TAAC : 300 ns TRANS_SPEED : 4000000 KHz READ_BL_LEN : 512 Bytes C_SIZE : HIGH CAPACITY WP_GRP_ENABLE : YES WRITE_BL_LEN : 512 Bytes CONTENT_PROT_APP : NO PERM_WRITE_PROTECT: NO TMP_WRITE_PROTECT : NO Dumping Custom Region Please wait for some time... Partition Selected: USER AREA (eMMC Clock 7500000 Hz) Patch Bit Found... Total Patch Bits Found: 1 Patching AMSS... Patch OK! SP Unlock Done! PIN: 00000000 PUK: 0000000000 Total Elapsed Time 00:01:05 Operation Cancelled... before unlock all working well ,after i unlock my lumia 710 no display just light and also on off button not working ,but when i plug phone to computer usb or charger its vibrate computer detecting phone in normal mode without display ,hav just light and song off lumia .i try flash and succesful flash but same prob no display and on off botton not work please help team to solved this problem thks

12-21-2013, 10:25	#2 (permalink)
..::Angel::.. No Life Poster Join Date: Dec 2006 Location: Karachi, Pakistan Age: 33 Posts: 16,237 Member: 643472 Status: Offline Sonork: 100.96901 Thanks Meter: 16,589	Hi, why did you unlock lumia 710 with Test Points? We supports this model unlocking with simple USB cable. So do NOT use Test Point unlocking next time. As of now, check Test Point if there are some soldering left on PCB or if something is grounded. BR