N7100 NO Product Name "DONE" - GSM-Forum

rico_deep · 04-15-2014, 03:56

N7100 NOTE 2
Problem: NO PRODUCT NAME

1st try on ODIN but always FAILED or stuck at pit mapping

NOTICE

Quote:

First of all repairing N7100 and I9300 eMMC is NOT A 100% SOLUTION!!!

80% of these problematic phones NEED eMMC Chip Replacement.

This means you only have a 20% Success Rate on whatever Box or Tools you use.

2nd try via ATF Direct EMMC programming (ISP method)
Tools need:
ATF BOX (BIG or NITRO)
AFT 4 N 1 EMMC Adaptor

GUIDE and INSTRUCTION HERE

WRITE BOOT 1

WRITE USER DATA

BOOT PARTITION SET

AFTER this PHONE is ALIVE with PRODUCT NAME FIX
BUT in my case HANG on LOGO
FLASH via ODIN

IMEI Repair via Z3X

DONE

ATF ROCK'S

br.
FFC

amgad_x · 04-15-2014, 14:57

we need the pic for the pinout for emmc

saleem5001 · 04-16-2014, 09:57

not have good diagram just describe thats a red green orange etc me not undestatnd

make good diagram from team side i feel very bad atf cannot compition with jtag tool if they not start good diagram means emmc pinouts

..::Angel::.. · 04-16-2014, 10:59

@saleem5001

It is not our problem if you only not understand and cannot understand how eMMC Repair works with ATF Box. We will not come to your place and help you understand every pinout....

Here is posted clear diagram/photo of eMMC and it's Pinouts. If you cannot understand at first, then maybe read it a few times:
http://forum.gsmhosting.com/vbb/f609...epair-1785442/

If you still not understand, then post here what you didn't understand, instead of writing: "not have good diagram", "i feel very bad atf cannot compition with jtag tool" and all other blah blah...

saleem5001 · 04-16-2014, 12:08

Quote:

Originally Posted by ..::Angel::..

@saleem5001

http://forum.gsmhosting.com/vbb/f609...epair-1785442/

If you still not understand, then post here what you didn't understand, instead of writing: "not have good diagram", "i feel very bad atf cannot compition with jtag tool" and all other blah blah...

i m not smart like u r other user so make it easy life make a adaptor for direct emmc repairing

http://forum.gsmhosting.com/vbb/f609.../#post10239167

i hope u undestand what me say if u now not make it easy future is disturab all atf user its request from my side make it easy
sorry for all my all other blah blah all other blah blah all other blah blah......

04-15-2014, 14:57	#2 (permalink)
amgad_x Junior Member Join Date: Aug 2006 Posts: 35 Member: 327186 Status: Offline Sonork: 1621233 Thanks Meter: 8	good work we need the pic for the pinout for emmc

04-16-2014, 09:57	#3 (permalink)
saleem5001 No Life Poster Join Date: Jan 2010 Location: South africa Age: 35 Posts: 2,672 Member: 1197620 Status: Offline Sonork: 100.1602278 Thanks Meter: 647	not have good diagram just describe thats a red green orange etc me not undestatnd make good diagram from team side i feel very bad atf cannot compition with jtag tool if they not start good diagram means emmc pinouts

04-16-2014, 10:59	#4 (permalink)
..::Angel::.. No Life Poster Join Date: Dec 2006 Location: Karachi, Pakistan Age: 33 Posts: 16,237 Member: 643472 Status: Offline Sonork: 100.96901 Thanks Meter: 16,589	@saleem5001 It is not our problem if you only not understand and cannot understand how eMMC Repair works with ATF Box. We will not come to your place and help you understand every pinout.... Here is posted clear diagram/photo of eMMC and it's Pinouts. If you cannot understand at first, then maybe read it a few times: http://forum.gsmhosting.com/vbb/f609...epair-1785442/ If you still not understand, then post here what you didn't understand, instead of writing: "not have good diagram", "i feel very bad atf cannot compition with jtag tool" and all other blah blah...