Need Help with ATF FBUS <<< SOLVED >>> - GSM-Forum

ajit bs · 07-06-2013, 12:29

I long back raised a question that I have recently bought a ATF box but unable to detect any set with FBUS but I did not get any appropriate solution .. while I was thinking that opening box might breaks its warranty .. but today I dared to open my box and did the procedure as discussed so many time on this forum for green light ... But doing all this I am still facing problem for old models with FBUS .. Hope I will be helped

what I did

Pictures of my box :

as by the product supporter of ATF Mr. Srinibas that this Board is new and needs not to remove any components .. it needs just to short these two points

after shorting these two points without removing any part

I got it done but only for extension port I mean for New models

Here are screenshots

But old Models I mean another Port have still Problem none of the old models are detected ..

Screenshot

ajit bs · 07-06-2013, 16:13

is there any team member who can reply to my request ...

..::Angel::.. · 07-06-2013, 17:05

@ajit bs

Did you Restore Box with Normal PCB ticked ???

BR

ajit bs · 07-07-2013, 03:26

yes i did .. but same problem

ajit bs · 07-07-2013, 03:48

Ok thanks I solved my problem myself

qualitymobile · 08-10-2014, 19:04

thanks angel bro . i did all thing but didnt see that the modified pcb was ticked

07-06-2013, 12:29	#1 (permalink)
ajit bs No Life Poster Join Date: May 2008 Posts: 1,479 Member: 772651 Status: Offline Thanks Meter: 1,694	Need Help with ATF FBUS <<< SOLVED >>> I long back raised a question that I have recently bought a ATF box but unable to detect any set with FBUS but I did not get any appropriate solution .. while I was thinking that opening box might breaks its warranty .. but today I dared to open my box and did the procedure as discussed so many time on this forum for green light ... But doing all this I am still facing problem for old models with FBUS .. Hope I will be helped what I did Pictures of my box : as by the product supporter of ATF Mr. Srinibas that this Board is new and needs not to remove any components .. it needs just to short these two points after shorting these two points without removing any part I got it done but only for extension port I mean for New models Here are screenshots But old Models I mean another Port have still Problem none of the old models are detected .. Screenshot

07-06-2013, 16:13	#2 (permalink)
ajit bs No Life Poster Join Date: May 2008 Posts: 1,479 Member: 772651 Status: Offline Thanks Meter: 1,694	is there any team member who can reply to my request ...

07-06-2013, 17:05	#3 (permalink)
..::Angel::.. No Life Poster Join Date: Dec 2006 Location: Karachi, Pakistan Age: 33 Posts: 16,237 Member: 643472 Status: Offline Sonork: 100.96901 Thanks Meter: 16,589	@ajit bs Did you Restore Box with Normal PCB ticked ??? BR

07-07-2013, 03:26	#4 (permalink)
ajit bs No Life Poster Join Date: May 2008 Posts: 1,479 Member: 772651 Status: Offline Thanks Meter: 1,694	yes i did .. but same problem

07-07-2013, 03:48	#5 (permalink)
ajit bs No Life Poster Join Date: May 2008 Posts: 1,479 Member: 772651 Status: Offline Thanks Meter: 1,694	Ok thanks I solved my problem myself

08-10-2014, 19:04	#6 (permalink)
qualitymobile Junior Member Join Date: Apr 2012 Posts: 14 Member: 1754148 Status: Offline Sonork: 12345 Thanks Meter: 0	thanks angel bro . i did all thing but didnt see that the modified pcb was ticked