Need help with E66 DCC writing problem. - GSM-Forum

Alex1234 · 07-17-2012, 09:57

I can't fix DCC mismath problem at one E66 RM-343, log:

================================================
Basic Phone Information
================================================
MCU Version: V ICPR71_09w47.10 20-01-11 RM-343 (c) Nokia
IMEI Plain : xxxxxxxxxxxxxxxxxxxx
IMEI Spare : xxxxxxxxxxxxxxxxxxxxxx
IMEI SV : xxxxxxxxxxxxxxxxxxxx
Phone Model: Nokia E66
Category : Smartphone
Phone Type : RM-343

================================================
Extended Phone Information
================================================
Product Serial Number: MEJ626714
Product Code : 0557928
Basic Production Code: 0552842
Long Production SN : 0
MCU SW Version : V ICPR71_09w47.10 20-01-11 RM-343 (c) Nokia
HW Version : 0700
RFIC Version : 17141716
DSP Version : ICPR71_09w40
Content : )510.21.009 19-03-2011 RM-343 (c)Nokia
AHNE Version : 11
APE SW Core Version : 510.21.009
Variant Version : 510.21.009510.21.009_v05
APE Test Version : RM343ENO74110842.a26
RETU Version : 16
TAHVO Version : 22
APE HW Version : 256
APE ADSP SW Version : 256
Wireless LAN ID : 30:38:55:EE:FA:18
Bluetooth ID : 30:38:55:EE:E2:A8
CS Type : GSM850, GSM900, GSM1800, GSM1900, WCDMA I, WCDMA VIII

================================================
Simlock Information
================================================
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2440700000000000
NETWORK NAME : Nokia Default;Finland
LOCK COUNTERS : KEYPRESS 0/3, FBUS 0/10
SIMLOCK TABLE :
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SIMLOCK STATE : Not Locked

SIMLOCK_TYPE : PA_SL3 (15-digit NCK)
SIMLOCK_TEST : PASSED
SECURITY_TEST : PASSED
SECURITY_CODE : ENCRYPTED
PHONE_MODE : LOCAL

================================================
Primary Dynamic Camera Configuration
================================================
DCC ID : 86L10300010406260004
DCC Ver: 000000

ERROR: DCC File Mismatched!

Required DCC File: 86L10300010406260004
Write the correct DCC to Fix the Problem

================================================
Secondary Dynamic Camera Configuration
================================================
DCC ID : 86000300010401022B04
DCC Ver: 000000

ERROR: DCC File Mismatched!

Required DCC File: 86L10300010406260004
Write the correct DCC to Fix the Problem

I turn off option "Automatically fix DCC errors", checks "Forced write", then write needed dcc file:

Required DCC File: 86L10300010406260004
Write the correct DCC to Fix the Problem

You selected >>> C:\AdvanceBox Turbo Flasher\Nokia\DCC\Common\86L10300010406260004_0015 09.dcc
Uploading to phone...

Successfully Uploaded DCC Data
Rebooting Phone... (Wait for 9 Seconds)
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

================================================
Basic Phone Information
================================================
MCU Version: V ICPR71_09w47.10 20-01-11 RM-343 (c) Nokia
IMEI Plain : 351549046820081
IMEI Spare : A351549046820080
IMEI SV : 33515490468200856F
Phone Model: Nokia E66
Category : Smartphone
Phone Type : RM-343

================================================
Primary Dynamic Camera Configuration
================================================
DCC ID : 86L10300010406260004
DCC Ver: 000000

ERROR: DCC File Mismatched!

Required DCC File: 86L10300010406260004
Write the correct DCC to Fix the Problem

================================================
Secondary Dynamic Camera Configuration
================================================
DCC ID : 86000300010401022B04
DCC Ver: 000000

ERROR: DCC File Mismatched!

Required DCC File: 86L10300010406260004
Write the correct DCC to Fix the Problem

How i can fix it?

gsm_new1 · 07-17-2012, 17:21

@Alex1234
bro this DCC (86L10300010406260004) file is already here...

C:\AdvanceBox Turbo Flasher\Nokia\DCC\Common

bro

Alex1234 · 07-18-2012, 04:16

I know. And i write it for 1000 times

But error not fix.

Quote:

You selected >>> C:\AdvanceBox Turbo Flasher\Nokia\DCC\Common\86L10300010406260004_0015 09.dcc
Uploading to phone...

Successfully Uploaded DCC Data
Rebooting Phone... (Wait for 9 Seconds)
VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

================================================
Basic Phone Information
================================================
MCU Version: V ICPR71_09w47.10 20-01-11 RM-343 (c) Nokia
IMEI Plain : 351549046820081
IMEI Spare : A351549046820080
IMEI SV : 33515490468200856F
Phone Model: Nokia E66
Category : Smartphone
Phone Type : RM-343

================================================
Primary Dynamic Camera Configuration
================================================
DCC ID : 86L10300010406260004
DCC Ver: 000000

ERROR: DCC File Mismatched!

Required DCC File: 86L10300010406260004
Write the correct DCC to Fix the Problem

Yesterday i change camera, ATF is reading new camera's id, so i think hardware is Ok, it's just software problem.

srinibas · 07-18-2012, 04:53

Quote:

Originally Posted by Alex1234

I know. And i write it for 1000 times

But error not fix.

Yesterday i change camera, ATF is reading new camera's id, so i think hardware is Ok, it's just software problem.

Yes after change camera the DCC id also changed , it need to match with software & your desired DCC id available in - C:\AdvanceBox Turbo Flasher\Nokia\DCC\Common

Br - srinibas

Alex1234 · 07-18-2012, 08:50

thx Bro

)
But:

I write correct dcc from ATF folder, many-many times, but no result, i always get error!!!
I write all of ddc what exist for E66, no result, always dcc mismatch error!

gsm_new1 · 07-18-2012, 09:07

Quote:

Originally Posted by Alex1234

thx Bro

)
But:

I write correct dcc from ATF folder, many-many times, but no result, i always get error!!!
I write all of ddc what exist for E66, no result, always dcc mismatch error!

ok bro read the rpl.

and then write the full pm u will be find the full pm here...

C:\AdvanceBox Turbo Flasher\Nokia\PM Files

bro

Alex1234 · 07-18-2012, 09:43

History of this phone:
Bad simlock zone - buy RPL - full erase - write rpl, pm, etc...

But i will try now one more time

greg_kovacs · 08-03-2015, 21:27

Hello,

did you manage to fix the DCC problem ?
I have the same trouble, ATF shows me DCC version 000000 but i dont have such a file.

Thank you

07-17-2012, 09:57	#1 (permalink)
Alex1234 Freak Poster Join Date: Jun 2003 Location: Russia Age: 45 Posts: 285 Member: 31044 Status: Offline Thanks Meter: 0	Need help with E66 DCC writing problem. I can't fix DCC mismath problem at one E66 RM-343, log: ================================================ Basic Phone Information ================================================ MCU Version: V ICPR71_09w47.10 20-01-11 RM-343 (c) Nokia IMEI Plain : xxxxxxxxxxxxxxxxxxxx IMEI Spare : xxxxxxxxxxxxxxxxxxxxxx IMEI SV : xxxxxxxxxxxxxxxxxxxx Phone Model: Nokia E66 Category : Smartphone Phone Type : RM-343 ================================================ Extended Phone Information ================================================ Product Serial Number: MEJ626714 Product Code : 0557928 Basic Production Code: 0552842 Long Production SN : 0 MCU SW Version : V ICPR71_09w47.10 20-01-11 RM-343 (c) Nokia HW Version : 0700 RFIC Version : 17141716 DSP Version : ICPR71_09w40 Content : )510.21.009 19-03-2011 RM-343 (c)Nokia AHNE Version : 11 APE SW Core Version : 510.21.009 Variant Version : 510.21.009510.21.009_v05 APE Test Version : RM343ENO74110842.a26 RETU Version : 16 TAHVO Version : 22 APE HW Version : 256 APE ADSP SW Version : 256 Wireless LAN ID : 30:38:55:EE:FA:18 Bluetooth ID : 30:38:55:EE:E2:A8 CS Type : GSM850, GSM900, GSM1800, GSM1900, WCDMA I, WCDMA VIII ================================================ Simlock Information ================================================ CONFIG KEY : 0000000000000000 PROVIDER KEY : 2440700000000000 NETWORK NAME : Nokia Default;Finland LOCK COUNTERS : KEYPRESS 0/3, FBUS 0/10 SIMLOCK TABLE : Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open SIMLOCK STATE : Not Locked SIMLOCK_TYPE : PA_SL3 (15-digit NCK) SIMLOCK_TEST : PASSED SECURITY_TEST : PASSED SECURITY_CODE : ENCRYPTED PHONE_MODE : LOCAL ================================================ Primary Dynamic Camera Configuration ================================================ DCC ID : 86L10300010406260004 DCC Ver: 000000 ERROR: DCC File Mismatched! Required DCC File: 86L10300010406260004 Write the correct DCC to Fix the Problem ================================================ Secondary Dynamic Camera Configuration ================================================ DCC ID : 86000300010401022B04 DCC Ver: 000000 ERROR: DCC File Mismatched! Required DCC File: 86L10300010406260004 Write the correct DCC to Fix the Problem I turn off option "Automatically fix DCC errors", checks "Forced write", then write needed dcc file: Required DCC File: 86L10300010406260004 Write the correct DCC to Fix the Problem You selected >>> C:\AdvanceBox Turbo Flasher\Nokia\DCC\Common\86L10300010406260004_0015 09.dcc Uploading to phone... Successfully Uploaded DCC Data Rebooting Phone... (Wait for 9 Seconds) VBATT Powering Down <<<< VBATT Powering Up >>>> SET VCCIO Level Done SET BSI Load Done ================================================ Basic Phone Information ================================================ MCU Version: V ICPR71_09w47.10 20-01-11 RM-343 (c) Nokia IMEI Plain : 351549046820081 IMEI Spare : A351549046820080 IMEI SV : 33515490468200856F Phone Model: Nokia E66 Category : Smartphone Phone Type : RM-343 ================================================ Primary Dynamic Camera Configuration ================================================ DCC ID : 86L10300010406260004 DCC Ver: 000000 ERROR: DCC File Mismatched! Required DCC File: 86L10300010406260004 Write the correct DCC to Fix the Problem ================================================ Secondary Dynamic Camera Configuration ================================================ DCC ID : 86000300010401022B04 DCC Ver: 000000 ERROR: DCC File Mismatched! Required DCC File: 86L10300010406260004 Write the correct DCC to Fix the Problem How i can fix it?

07-18-2012, 08:50	#5 (permalink)
Alex1234 Freak Poster Join Date: Jun 2003 Location: Russia Age: 45 Posts: 285 Member: 31044 Status: Offline Thanks Meter: 0	thx Bro) But: I write correct dcc from ATF folder, many-many times, but no result, i always get error!!! I write all of ddc what exist for E66, no result, always dcc mismatch error!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
need ericsson 88 cable	migdamas	Old Ericsson Phones & Sony Phones	2	03-24-2017 16:24
Need software upgrade for Nokia 5110	ptkrf	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	30	02-24-2016 10:21
Help with 6110	paulomt1	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	2	05-25-2009 16:29
need eeprom photo????	mobileinfo	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	0	05-26-1999 11:35

07-17-2012, 17:21	#2 (permalink)
gsm_new1 No Life Poster Join Date: Dec 2009 Location: DUBAI Age: 33 Posts: 1,261 Member: 1189306 Status: Offline Sonork: 100.1589231 Thanks Meter: 273	@Alex1234 bro this DCC (86L10300010406260004) file is already here... C:\AdvanceBox Turbo Flasher\Nokia\DCC\Common bro

07-18-2012, 09:43	#7 (permalink)
Alex1234 Freak Poster Join Date: Jun 2003 Location: Russia Age: 45 Posts: 285 Member: 31044 Status: Offline Thanks Meter: 0	History of this phone: Bad simlock zone - buy RPL - full erase - write rpl, pm, etc... But i will try now one more time

08-03-2015, 21:27	#8 (permalink)
greg_kovacs Junior Member Join Date: Jun 2014 Posts: 36 Member: 2213833 Status: Offline Thanks Meter: 3	Hello, did you manage to fix the DCC problem ? I have the same trouble, ATF shows me DCC version 000000 but i dont have such a file. Thank you