Nokia 106 IMEI blank after flash ! - GSM-Forum

zakiyyboss · 02-18-2015, 14:41

What can be the PROBLEM !!! AND dOES NOT NOT AT ALL!!

Quote:

VBATT Powering Down <<<<
VBATT Powering Up >>>>
SET VCCIO Level Done
SET BSI Load Done

Booting Phone...
CPU ID Response: A200341100
CPU Type: XG110 2.1B
Phone Booted at after First attempt...

************************************************** ****
TIME STARTS HERE
************************************************** ****

Sending PBL 19456 bytes...
PBL Successfully Sent...

Sending SBL 65024 bytes...
SBL Successfully Sent...
Flash Chip Manufacturer ID: 0x00EF
Flash Chip Type: 64 Mbit (4Mb x 16) NOR
Extended Information: Multi-Bank / 1.8v

Processing Image File: D:\Nokia Flash File\products\RM-962\rm962_02.90ic

Data Block Found...
Number of Sections: 01
IMAGE Certificate Block Sent Successfully...
Processing Section 01 of 01
IMAGE Erase Block: 0x00210000~0x0039A33E
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 1614656 bytes
Data Checksum: 6B15
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...

Processing Image File: D:\Nokia Flash File\products\RM-962\rm962_nai02.90ic

Data Block Found...
Number of Sections: 01
IMAGE Certificate Block Sent Successfully...
Processing Section 01 of 01
IMAGE Erase Block: 0x00EB0000~0x00F161BE
Start Erasing...
Erasing Please Wait...
Block Erase Done...
Preparing Data Blocks...
Data Size: 418240 bytes
Data Checksum: 7E6F
Uploading Data Blocks to phone...
IMAGE Data Blocks uploaded to phone...
Start Data Verification... (Please wait)
Data Verification Successful...

Exit Flash Mode Done...
Time Elapse : 00:00:36

************************************************** ****
You must Factory Reset the phone to enable the
ringtones and other customized settings to work
************************************************** ****

Waiting For Phone to go Online...

5, 4, 3, 2, 1...
MCU: V 02.70 22-02-13 RM-908 (c) Nokia
IMEI: ????????0000000
Product Serial Number: F93B5E6BI
Product Code : 059T2F5
Module Code : 0205710
Basic Production Code: 059S7H2
PPM SW Version : V 02.90 21-08-13 RM-962 (c) Nokia IC
ADSP Version : p V 02.90\n21-08-13\nRM-962\n(c) NMP\nic
MCU SW Version : V 02.70 22-02-13 RM-908 (c) Nokia
HW Version : 2300
UEM Version : 1328
UPP Version : 8850
LCD Version : TPO:BARACOAv90 HX5081
********** SIMLOCK INFO **********
CONFIG_DATA : 0000000000000000
PROFILE_BITS : 0000000000040000
ASIC : 11
PROVIDER : Unknown Provider

Unable to read SP Data..
ST_LCD_TEST : PASSED

FACTORY SET TO : Full Factory Set
FAILED
FACTORY SET TO : User Data
OK
FACTORY SET TO : Leave Factory
OK
FACTORY SET TO : Service Center
OK
FACTORY SET TO : Software Upgrade
OK
FACTORY SET TO : Production Tune
OK

bk.gsm · 02-18-2015, 15:29

flash your phone with 3 files at once(mcu+ppm+cnt)...cuz I saw from your log the mcu version is different that the ppm and cnt...

b.r.

zakiyyboss · 02-18-2015, 16:42

Quote:

Originally Posted by bk.gsm

flash your phone with 3 files at once(mcu+ppm+cnt)...cuz I saw from your log the mcu version is different that the ppm and cnt...

b.r.

Any LINK where i can GET this FLASh file.. LOOKING everywhere not able to DOWNLOAD !

bk.gsm · 02-19-2015, 10:34

Quote:

Originally Posted by zakiyyboss

Any LINK where i can GET this FLASh file.. LOOKING everywhere not able to DOWNLOAD !

Code:

MCU SW Version : V 02.70 22-02-13 RM-908 (c) Nokia

your phone is nokia 105 or nokia 106??cuz from the MCU your phone is Nokia 105 and u flashed Nokia 106 ppm and cnt..

download Nokia 105 flash files and flash your set again..

b.r.

zakiyyboss · 02-19-2015, 11:08

Quote:

Originally Posted by bk.gsm

Code:

MCU SW Version : V 02.70 22-02-13 RM-908 (c) Nokia

your phone is nokia 105 or nokia 106??cuz from the MCU your phone is Nokia 105 and u flashed Nokia 106 ppm and cnt..

download Nokia 105 flash files and flash your set again..

b.r.

My set is 106.1 I dont have any place to download the flash file? Please give me a link !?

bk.gsm · 02-19-2015, 11:50

Quote:

Originally Posted by zakiyyboss

My set is 106.1 I dont have any place to download the flash file? Please give me a link !?

sorry man...I just fine ppm and cnt files..MCU file is missing I guess

b.r.

mphussain · 07-01-2015, 11:21

Nokia 106 rm- 962 need flash file any boday have please uplode the file MCU+ ppm+ image file need full file product code 059t2d7 please its argent

02-18-2015, 15:29	#2 (permalink)
bk.gsm Product Supporter Join Date: Sep 2008 Location: UMT Support section Age: 33 Posts: 3,770 Member: 869809 Status: Offline Thanks Meter: 1,706	flash your phone with 3 files at once(mcu+ppm+cnt)...cuz I saw from your log the mcu version is different that the ppm and cnt... b.r.

07-01-2015, 11:21	#7 (permalink)
mphussain Major Poster Join Date: Dec 2014 Location: bihar jalley Posts: 46 Member: 2320363 Status: Offline Sonork: My sonoker I'd 100.166773 Thanks Meter: 44	Nokia 106 rm- 962 need flash file any boday have please uplode the file MCU+ ppm+ image file need full file product code 059t2d7 please its argent