Nokia 2690 Flash Error... 1 Sub Block ID : 16 PROGRAMMING_ERROR_BB5 - GSM-Forum

binadam23 · 02-04-2014, 08:11

I Try All my best but still getting the error bellow:
================================================
INFO: RX2 PIN is OK
================================================
>> CMT Rootkey Hash CERT : NOLO
>> CMT Rootkey Hash CERT : KEYS
>> CMT Rootkey Hash CERT : PRIMAPP
>> CMT Rootkey Hash CERT : PASUBTOC
>> CMT Rootkey Hash CERT : PAPUBKEYS
>> CMT Rootkey Hash CERT : UPDAPP
>> CMT Rootkey Hash CERT : DSP0
>> CMT Rootkey Hash CERT : MCUSW
>> CMT Rootkey Hash CERT : PMM_CONF
>> CMT Rootkey Hash CERT : SBIF_CONF
ContinueFlash_DCT5 Complete
Status_BB5 STATUS_REQUEST_BB5..
1 Sub Block ID : 16 PROGRAMMING_ERROR_BB5
Block Length : 0F
BB ASIC Index : 00
Error Type : 01
Error Spec : 06
Of*****ng Address : 003FC400
Expected Content : 0000D06D
Detected Content : 0000D06D

Try to change the Flashing clock...
Flashing FAILED
BB5_WRITE_FlashFile_0
Go to Settings -->
Nokia Settings -->
FBUS DDR&2TX Synchronization Timeout
Change the current value selected to a higher value
and Restart AdvanceBox.exe software to apply it
Operations Failed....

And i also configure the atf like in this link: http://forum.gsmhosting.com/vbb/7381772-post5.html

Advance-Box · 02-04-2014, 08:16

@binadam23

What ATF Version are you using?

binadam23 · 02-04-2014, 08:50

Quote:

Originally Posted by Advance-Box

@binadam23

What ATF Version are you using?

Version 10.50

............................

Advance-Box · 02-04-2014, 08:52

@binadam23

Try with latest atf v11.00

binadam23 · 02-04-2014, 08:55

ok now updating it already...

binadam23 · 02-04-2014, 08:56

but note am using the atf+ufc4

binadam23 · 02-04-2014, 08:59

because when i try with the usb am getting this:

ERROR: Use FBUS Connection for this Phone...

================================================== ====
The CPU of this Phone is not capable of
USB New Protocol Communication
================================================== ====

Advance-Box · 02-04-2014, 09:02

@binadam23

Yes,, ATF is telling you correct INFO.

If phone is dead, you cannot USB flash it because:

================================================== ====
The CPU of this Phone is not capable of
USB New Protocol Communication
================================================== ====

binadam23 · 02-04-2014, 09:09

Now After Update Am getting new Error:

SearchForBootstrap_DCT5..
ERROR: SECONDARY LOADER NOT FOUND
ERROR: Sending Loader Failed...
ERROR: FBUS Boot FAILED
================================================
Basic Phone Information
================================================

================================================== ====
Selected VPL File:
RM635_0592085_10.10_028.vpl
================================================== ====
Variant Details : RM-635 MEA M_N BLACK LATIN MEA18
Software Version : 10.10
Product Type : RM-635
Product Code : 0592085
Variant Version : 028

azeem jeddah · 02-04-2014, 15:56

br use good fbus cable then flash .this model usb flashing problem and every time error

binadam23 · 02-04-2014, 16:50

Quote:

Originally Posted by azeem jeddah

br use good fbus cable then flash .this model usb flashing problem and every time error

am using Dits UFC4 instead of fbus cable.

binadam23 · 02-04-2014, 16:53

@X-Shadow
see what am seeing now after updating the ATF to v11.00

when i scan the phone i get this error:

Code:

Forcing Test Mode via BUSCHECK...
Booting Phone via FBUS...

VBATT Powering Down <<<<
VBATT Powering Up   >>>>
SET VCCIO Level Done
SET BSI Load Done

AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

******************************************************
                  TIME STARTS HERE                      
******************************************************

BootFlashModeDCT5Ex Succeeded after 3 Attempts
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0  (0x00) bytes returned
Number of Sub Blocks 7  (0x07)
  1  SYSTEM_ASIC_ID 01
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000001
     ID DWORD    1 : 00000226
     ID DWORD    2 : 00010006
     ID DWORD    3 : 030C1921
     ID DWORD    4 : 01033000
  2  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000296
  3  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000B22
  4  PUBLIC_ID 12
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 22500218
     ID DWORD    1 : 10A68E56
     ID DWORD    2 : D732E0E5
     ID DWORD    3 : 80B7500C
     ID DWORD    4 : 8FE4FF73
  5  ASIC_MODE_ID 13
     Block Length  : 2  (02)
     BB ASIC Index : 0  (00)  CMT
     Mode Id       : 00
  6  ROOT_KEY_HASH 14
     Block Length  : 17  (11)
     BB ASIC Index : 0  (00)  CMT
     Hash          :  9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23 
  7  ROM_ID 15
     Block Length  : 9  (09)
     BB ASIC Index : 0  (00)  CMT
     CRC         0 : 273F6D55
     CRC         1 : DFAAF68F
Checksum           39

SearchForBootstrap_DCT5..
ERROR: SECONDARY LOADER NOT FOUND
ERROR: Sending Loader Failed...
ERROR: FBUS Boot FAILED
================================================
             Basic Phone Information             
================================================

======================================================
Selected VPL File:
RM635_0592085_10.10_028.vpl
======================================================
Variant Details     : RM-635 MEA M_N BLACK LATIN MEA18
Software Version : 10.10
Product Type       : RM-635
Product Code      : 0592085
Variant Version    : 028


Forcing Test Mode via BUSCHECK...
Booting Phone via FBUS...

VBATT Powering Down <<<<
VBATT Powering Up   >>>>
SET VCCIO Level Done
SET BSI Load Done

AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

******************************************************
                  TIME STARTS HERE                      
******************************************************

BootFlashModeDCT5Ex Succeeded after 3 Attempts
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0  (0x00) bytes returned
Number of Sub Blocks 7  (0x07)
  1  SYSTEM_ASIC_ID 01
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000001
     ID DWORD    1 : 00000226
     ID DWORD    2 : 00010006
     ID DWORD    3 : 030C1921
     ID DWORD    4 : 01033000
  2  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000296
  3  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000B22
  4  PUBLIC_ID 12
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 22500218
     ID DWORD    1 : 10A68E56
     ID DWORD    2 : D732E0E5
     ID DWORD    3 : 80B7500C
     ID DWORD    4 : 8FE4FF73
  5  ASIC_MODE_ID 13
     Block Length  : 2  (02)
     BB ASIC Index : 0  (00)  CMT
     Mode Id       : 00
  6  ROOT_KEY_HASH 14
     Block Length  : 17  (11)
     BB ASIC Index : 0  (00)  CMT
     Hash          :  9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23 
  7  ROM_ID 15
     Block Length  : 9  (09)
     BB ASIC Index : 0  (00)  CMT
     CRC         0 : 273F6D55
     CRC         1 : DFAAF68F
Checksum           39

SearchForBootstrap_DCT5..
ERROR: SECONDARY LOADER NOT FOUND
ERROR: Sending Loader Failed...
ERROR: FBUS Boot FAILED
================================================
             Basic Phone Information             
================================================

======================================================
Selected VPL File:
RM635_0592085_10.10_028.vpl
======================================================
Variant Details     : RM-635 MEA M_N BLACK LATIN MEA18
Software Version : 10.10
Product Type       : RM-635
Product Code      : 0592085
Variant Version    : 028

and when i try flashing i get this error:

Code:

ATF Software Version v11.00         
ATF Nitro FBUS Flash Started...
                                   
Number of Image Files: 3
Forcing Test Mode via BUSCHECK...
Booting Phone via FBUS...


AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

******************************************************
                  TIME STARTS HERE                      
******************************************************

BootFlashModeDCT5Ex Succeeded First Time
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0  (0x00) bytes returned
Number of Sub Blocks 7  (0x07)
  1  SYSTEM_ASIC_ID 01
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000001
     ID DWORD    1 : 00000226
     ID DWORD    2 : 00010006
     ID DWORD    3 : 030C1921
     ID DWORD    4 : 01033000
  2  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000296
  3  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000B22
  4  PUBLIC_ID 12
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 22500218
     ID DWORD    1 : 10A68E56
     ID DWORD    2 : D732E0E5
     ID DWORD    3 : 80B7500C
     ID DWORD    4 : 8FE4FF73
  5  ASIC_MODE_ID 13
     Block Length  : 2  (02)
     BB ASIC Index : 0  (00)  CMT
     Mode Id       : 00
  6  ROOT_KEY_HASH 14
     Block Length  : 17  (11)
     BB ASIC Index : 0  (00)  CMT
     Hash          :  9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23 
  7  ROM_ID 15
     Block Length  : 9  (09)
     BB ASIC Index : 0  (00)  CMT
     CRC         0 : 273F6D55
     CRC         1 : DFAAF68F
Checksum           39

SearchForBootstrap_DCT5..
ERROR: SECONDARY LOADER NOT FOUND
ERROR: Sending Loader Failed...
ERROR: FBUS Boot FAILED
================================================
             Basic Phone Information             
================================================
WARNING: Simlock Backup Failed
If this is a Dead Phone, just click YES
to Continue with the Flash Procedure...
                                          
Changing MODE : FLASH
Booting Phone via FBUS...

VBATT Powering Down <<<<
VBATT Powering Up   >>>>
SET VCCIO Level Done
SET BSI Load Done

AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

******************************************************
                  TIME STARTS HERE                      
******************************************************

BootFlashModeDCT5Ex Succeeded after 3 Attempts
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0  (0x00) bytes returned
Number of Sub Blocks 7  (0x07)
  1  SYSTEM_ASIC_ID 01
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000001
     ID DWORD    1 : 00000226
     ID DWORD    2 : 00010006
     ID DWORD    3 : 030C1921
     ID DWORD    4 : 01033000
  2  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000296
  3  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000B22
  4  PUBLIC_ID 12
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 22500218
     ID DWORD    1 : 10A68E56
     ID DWORD    2 : D732E0E5
     ID DWORD    3 : 80B7500C
     ID DWORD    4 : 8FE4FF73
  5  ASIC_MODE_ID 13
     Block Length  : 2  (02)
     BB ASIC Index : 0  (00)  CMT
     Mode Id       : 00
  6  ROOT_KEY_HASH 14
     Block Length  : 17  (11)
     BB ASIC Index : 0  (00)  CMT
     Hash          :  9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23 
  7  ROM_ID 15
     Block Length  : 9  (09)
     BB ASIC Index : 0  (00)  CMT
     CRC         0 : 273F6D55
     CRC         1 : DFAAF68F
Checksum           39

SearchForBootstrap_DCT5..
ERROR: SECONDARY LOADER NOT FOUND
ERROR: Sending Loader Failed...
 Failed to complete RPL backup..

Processing Image File : 
 C:\Program Files (x86)\Common Files\Nokia\DataPackage\Products\RM-635\rm635__10.10.mcusw
CMT Type                   :  BB5
CMT Algorithm              :  BB5 ALGORITHM
Secondary Sending Speed    :  3250000 Hz
Algorithm Sending Speed    :  6500000 Hz
Program Sending Speed      :  6500000 Hz
Message Reading Speed      :  98000 Hz
Number of Blocks           :  1165
Entry Point                :  0x5047
Page Format                :  128K
Maximum Page Size          :  0x00004000

Changing MODE : FLASH
Booting Phone via FBUS...

VBATT Powering Down <<<<
VBATT Powering Up   >>>>
SET VCCIO Level Done
SET BSI Load Done

AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

******************************************************
                  TIME STARTS HERE                      
******************************************************

BootFlashModeDCT5Ex Succeeded after 3 Attempts
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0  (0x00) bytes returned
Number of Sub Blocks 7  (0x07)
  1  SYSTEM_ASIC_ID 01
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000001
     ID DWORD    1 : 00000226
     ID DWORD    2 : 00010006
     ID DWORD    3 : 030C1921
     ID DWORD    4 : 01033000
  2  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000296
  3  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000B22
  4  PUBLIC_ID 12
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 22500218
     ID DWORD    1 : 10A68E56
     ID DWORD    2 : D732E0E5
     ID DWORD    3 : 80B7500C
     ID DWORD    4 : 8FE4FF73
  5  ASIC_MODE_ID 13
     Block Length  : 2  (02)
     BB ASIC Index : 0  (00)  CMT
     Mode Id       : 00
  6  ROOT_KEY_HASH 14
     Block Length  : 17  (11)
     BB ASIC Index : 0  (00)  CMT
     Hash          :  9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23 
  7  ROM_ID 15
     Block Length  : 9  (09)
     BB ASIC Index : 0  (00)  CMT
     CRC         0 : 273F6D55
     CRC         1 : DFAAF68F
Checksum           39

SearchForBootstrap_DCT5..
ERROR: SECONDARY LOADER NOT FOUND
ERROR: Sending Loader Failed...
 Operations Failed....

Please what do you think is the problem.........?
am using ATF+UFC4....

binadam23 · 02-05-2014, 08:21

Now After Downloading the ATF 11.00 Fixed http://forum.gsmhosting.com/vbb/f609...-hang-1774138/ The Flashing went smoothly but at the end in the process of Waiting for phone to go online it shows me flashing aborted. and ATF didn't shows the Basic Phone Information. and i connect the phone battery and on it but the phone just >> shows Nokia Logo >> then shows white screen and goes off.

please what do you think is wrong......?
and how can i solve it..........?

Code:

ATF Software Version v11.00         
ATF Nitro FBUS Flash Started...
                                   
Number of Image Files: 3

Waiting for Phone to Go Online...
Elapsed Time: 1s
Elapsed Time: 2s
Elapsed Time: 3s
Elapsed Time: 4s
Elapsed Time: 5s
Elapsed Time: 6s
Elapsed Time: 7s
Elapsed Time: 8s
Elapsed Time: 9s
Elapsed Time: 10s

================================================
             Basic Phone Information             
================================================
WARNING: Simlock Backup Failed
If this is a Dead Phone, just click YES
to Continue with the Flash Procedure...
                                          
Changing MODE : FLASH
Booting Phone via FBUS...

VBATT Powering Down <<<<
VBATT Powering Up   >>>>
SET VCCIO Level Done
SET BSI Load Done

AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

******************************************************
                  TIME STARTS HERE                      
******************************************************

BootFlashModeDCT5Ex Succeeded after 3 Attempts
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0  (0x00) bytes returned
Number of Sub Blocks 7  (0x07)
  1  SYSTEM_ASIC_ID 01
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000001
     ID DWORD    1 : 00000226
     ID DWORD    2 : 00010006
     ID DWORD    3 : 030C1921
     ID DWORD    4 : 01033000
  2  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000296
  3  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000B22
  4  PUBLIC_ID 12
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 22500218
     ID DWORD    1 : 10A68E56
     ID DWORD    2 : D732E0E5
     ID DWORD    3 : 80B7500C
     ID DWORD    4 : 8FE4FF73
  5  ASIC_MODE_ID 13
     Block Length  : 2  (02)
     BB ASIC Index : 0  (00)  CMT
     Mode Id       : 00
  6  ROOT_KEY_HASH 14
     Block Length  : 17  (11)
     BB ASIC Index : 0  (00)  CMT
     Hash          :  9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23 
  7  ROM_ID 15
     Block Length  : 9  (09)
     BB ASIC Index : 0  (00)  CMT
     CRC         0 : 273F6D55
     CRC         1 : DFAAF68F
Checksum           39

SearchForBootstrap_DCT5..
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_2nd.fg
Boot File - Version  010.042.00
Boot File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForBootstrap_DCT5  : No Error - 0 (0x00)
Secondary Loader Sent...
ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
MCU_CONFIGURATION_RESPONSE_BB5:
 MessageID  : 03
 SubBlocks  : 03
 1 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : NOR  00
   Device Index      : 00
   Manufacturer Code : 0089 -> 
   Device ID         : 8982 -> NU48F512
   Extended/Fixed ID : 0000
   Revision ID       : 8A31
 2 Sub Block ID      : 11  STORAGE_DEVICE_CONTENTS_BB5
   Block Length      : 13
   BB ASIC Index     : CMT  00
   Device Type       : NOR  00
   Device Index      : 00
   Device Contents   : 00000000000000000000
 3 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : MMC  04
   Device Index      : 00
   Manufacturer Code : FFFF -> Flash
   Device ID         : 0000 -> BAD FLASH TYPE
   Extended/Fixed ID : 0000
   Revision ID       : 0000
 Checksum   : 51
SearchForBootstrap_DCT5  : No Error - 0 (0x00)
FLS1SendAlgoCodeEx..
SendAlgoCode_DCT5..
SearchForAlgorithm_DCT5..
Looking for ALL Devices...
Searching Algorithm Files NOR (00) ManID :0089 DevID :8982 ExtID :0000 RevID :8A31
Flash Descriptor
   Manufacturer Code : 0089
   Device ID         : 8982
   Extended/Fixed ID : 0000
   Revision ID       : 0000
   Size              : 04000000 (64 MB)
   VPP Info          : 0009
   Erase10s          : 28
   Block1s           : 64
   BErase1s          : 02
   Reserved0         : 00
   Reserved1         : 00
   Reserved2         : 00
VPPInfo : VPP_INFO_3V_MASK  VPP_INFO_9V_MASK
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_algo.fg
Algorithm File - Version  010.040.00
Algorithm File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForAlgorithm_DCT5  : No Error - 0 (0x00)
TransmissionTypeRequest_DCT5...
SuggestedType  : 01 16BIT
TRANSMISSION_TYPE_REQUEST_BB5 :  59 01 20 01 01 DC
ReturnedType : 01 16BIT
TransmissionTypeRequest_DCT5  : No Error - 0 (0x00)

Uploading ALGO File...
SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
PAPUB_KEYS_HASH_REQ_BB5 
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
   PAPUB_KEYS_HASH_RESP_BB5 2A
   BB Asic Index   : 00
CMT PAPUBKEYS HASH: 
C6B9354E81AC464DED33FC7B90295086150F4539

===========================================
PHONE FIRMWARE VERSION:
V 10.10 22-04-10 RM-635 (c) Nokia
===========================================

START READING RPL DATA
Reading : NPC (CMT)
OK
Reading : VARIANT (CMT)
 VARIANT :  Empty  
Reading : CCC (CMT)
OK
Reading : HWC (CMT)
OK
Reading : R&D (CMT)
OK
Reading : PARTNERC (CMT)
 PARTNERC :  Empty  
Reading : MDM_KEYS (CMT)
 MDM_KEYS :  Empty  

NPC CERTIFICATE INFORMATION (CMT):
IMEI           : 352705041681212
PRODUCT CODE   : 0592085
BLUETOOTH ID   : A0:4E:04:2E:8A:45
PUBLIC_ID      : 2250021810A68E56D732E0E580B7500C8FE4FF73
PAPUB_KEYS_HASH: C6B9354E81AC464DED33FC7B90295086150F4539
CCC CERTIFICATE INFORMATION (CMT):
PRODUCT CODE   : 0592085
HWC CERTIFICATE INFORMATION (CMT):
PUBLIC_ID      : 2250021810A68E56D732E0E580B7500C8FE4FF73
PRODUCT CODE   : 0592085

FINISHED READING RPL DATA
 RPL saved to: C:\AdvanceBox Turbo Flasher\Nokia\backup\352705041681212\352705041681212_74319.rpl

Processing Image File : 
 C:\Program Files (x86)\Common Files\Nokia\DataPackage\Products\RM-635\rm635__10.10.mcusw
CMT Type                   :  BB5
CMT Algorithm              :  BB5 ALGORITHM
Secondary Sending Speed    :  3250000 Hz
Algorithm Sending Speed    :  6500000 Hz
Program Sending Speed      :  6500000 Hz
Message Reading Speed      :  98000 Hz
Number of Blocks           :  1165
Entry Point                :  0x5047
Page Format                :  128K
Maximum Page Size          :  0x00004000

Changing MODE : FLASH
Booting Phone via FBUS...

VBATT Powering Down <<<<
VBATT Powering Up   >>>>
SET VCCIO Level Done
SET BSI Load Done

AdvanceBox SendBootCodeEx
InitialiseBootstrap_DCT5 DIR
BootFlashMode_DCT5

******************************************************
                  TIME STARTS HERE                      
******************************************************

BootFlashModeDCT5Ex Succeeded after 3 Attempts
SYSTEM_ID_RESPONSE_BB5 (0xC0) - 0  (0x00) bytes returned
Number of Sub Blocks 7  (0x07)
  1  SYSTEM_ASIC_ID 01
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000001
     ID DWORD    1 : 00000226
     ID DWORD    2 : 00010006
     ID DWORD    3 : 030C1921
     ID DWORD    4 : 01033000
  2  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000296
  3  EM_ASIC_ID 02
     Block Length  : 5  (05)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 00000B22
  4  PUBLIC_ID 12
     Block Length  : 21  (15)
     BB ASIC Index : 0  (00)  CMT
     ID DWORD    0 : 22500218
     ID DWORD    1 : 10A68E56
     ID DWORD    2 : D732E0E5
     ID DWORD    3 : 80B7500C
     ID DWORD    4 : 8FE4FF73
  5  ASIC_MODE_ID 13
     Block Length  : 2  (02)
     BB ASIC Index : 0  (00)  CMT
     Mode Id       : 00
  6  ROOT_KEY_HASH 14
     Block Length  : 17  (11)
     BB ASIC Index : 0  (00)  CMT
     Hash          :  9D DB FC FE 6E 73 CE D7 D8 C6 26 8C 8E B8 57 23 
  7  ROM_ID 15
     Block Length  : 9  (09)
     BB ASIC Index : 0  (00)  CMT
     CRC         0 : 273F6D55
     CRC         1 : DFAAF68F
Checksum           39

SearchForBootstrap_DCT5..
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_2nd.fg
Boot File - Version  010.042.00
Boot File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForBootstrap_DCT5  : No Error - 0 (0x00)
Secondary Loader Sent...
ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
MCU_CONFIGURATION_RESPONSE_BB5:
 MessageID  : 03
 SubBlocks  : 03
 1 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : NOR  00
   Device Index      : 00
   Manufacturer Code : 0089 -> 
   Device ID         : 8982 -> NU48F512
   Extended/Fixed ID : 0000
   Revision ID       : 8A31
 2 Sub Block ID      : 11  STORAGE_DEVICE_CONTENTS_BB5
   Block Length      : 13
   BB ASIC Index     : CMT  00
   Device Type       : NOR  00
   Device Index      : 00
   Device Contents   : 00000000000000000000
 3 Sub Block ID      : 10  STORAGE_DEVICE_ID_BB5
   Block Length      : 0B
   BB ASIC Index     : CMT  00
   Device Type       : MMC  04
   Device Index      : 00
   Manufacturer Code : FFFF -> Flash
   Device ID         : 0000 -> BAD FLASH TYPE
   Extended/Fixed ID : 0000
   Revision ID       : 0000
 Checksum   : 51
SearchForBootstrap_DCT5  : No Error - 0 (0x00)
FLS1SendAlgoCodeEx..
SendAlgoCode_DCT5..
SearchForAlgorithm_DCT5..
Looking for ALL Devices...
Searching Algorithm Files NOR (00) ManID :0089 DevID :8982 ExtID :0000 RevID :8A31
Flash Descriptor
   Manufacturer Code : 0089
   Device ID         : 8982
   Extended/Fixed ID : 0000
   Revision ID       : 0000
   Size              : 04000000 (64 MB)
   VPP Info          : 0009
   Erase10s          : 28
   Block1s           : 64
   BErase1s          : 02
   Reserved0         : 00
   Reserved1         : 00
   Reserved2         : 00
VPPInfo : VPP_INFO_3V_MASK  VPP_INFO_9V_MASK
C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\New\RAP3Gv3_algo.fg
Algorithm File - Version  010.040.00
Algorithm File - Revision 0x0000 (0)
eBB5ProtocolType == Original
SearchForAlgorithm_DCT5  : No Error - 0 (0x00)
TransmissionTypeRequest_DCT5...
SuggestedType  : 01 16BIT
TRANSMISSION_TYPE_REQUEST_BB5 :  59 01 20 01 01 DC
ReturnedType : 01 16BIT
TransmissionTypeRequest_DCT5  : No Error - 0 (0x00)

Uploading ALGO File...
SendAlgoCodeFile_DCT5 : No Error - 0 (0x00)
PAPUB_KEYS_HASH_REQ_BB5 
PhoneInfoRequest_BB5 (Asic Index 00 )
PHONE_INFO_RESPONSE_BB5
   PAPUB_KEYS_HASH_RESP_BB5 2A
   BB Asic Index   : 00
CMT PAPUBKEYS HASH: 
C6B9354E81AC464DED33FC7B90295086150F4539

===========================================
PHONE FIRMWARE VERSION:
V 10.10 22-04-10 RM-635 (c) Nokia
===========================================

Read Type : FIASCO_BB5_DO_NOT_READ_CERTIFICATE (01)
Sending STORE_CERTIFICATE_REQUEST_BB5 (CMT  00 only)
Certificate 1
  Name        : NPC
  ASIC Index  : CMT  0
Certificate 2
  Name        : VARIANT
  ASIC Index  : CMT  0
Certificate 3
  Name        : R&D
  ASIC Index  : CMT  0
Certificate 4
  Name        : CCC
  ASIC Index  : CMT  0
Certificate 5
  Name        : HWC
  ASIC Index  : CMT  0
STORE_CERTIFICATE_REQUEST_BB5 : 61 05 2B 0D 4E 50 43 00 00 00 00 00 00 00 00 00 00 2B 0D 56 41 52 49 41 4E 54 00 00 00 00 00 00 2B 0D 52 26 44 00 00 00 00 00 00 00 00 00 00 2B 0D 43 43 43 00 00 00 00 00 00 00 00 00 00 2B 0D 48 57 43 00 00 00 00 00 00 00 00 00 00 85 
STORE_CERTIFICATE_REQUEST_BB5 : No Error - 0 (0x00)
VPP Enabled by Software
Using Internal VPP
StartErase_DCT5...
BlockLength  :  0x36  (54)
ERASE Blocks :  0x01  (1)
     0   ERASE_AREA_BB5 0x12
            Block Length     : 0x33 (51)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x00 NOR
            Device Index     : 0x00
               0             : 00000000-000006BF
               1             : 000006C0-0001FFFF
               2             : 00040000-000BFFFF
               3             : 000C0000-0013FFFF
               4             : 00140000-0137FFFF
               5             : 01380000-0151FFFF

Erase_SendEraseBlock_BB5_NOR
Task in Progress... Please Wait...
STATUS_REQUEST_BB5...
1  Sub Block ID      : 14 STATUS_NOR_OK_BB5
           Block Length      : 01
           BB ASIC Index     : 00

Successfully erased..
Time Taken to Erase : 00:01:42
TRANSMISSION_TYPE_REQUEST_BB5 :  59 01 20 01 04 D9
ReturnedType : 04 DDR & 2TX
TransmissionTypeRequest_DCT5  : No Error - 0 (0x00)

Flashing Speed: 5.00 Mhz
Processing  : rm635__10.10.mcusw
Total blocks to write : 1165
================================================
         FBUS Cable RX2 PIN Diagnostics         
================================================
STATUS_REQUEST_BB5...
1  Sub Block ID      : 14 STATUS_NOR_OK_BB5
           Block Length      : 01
           BB ASIC Index     : 00
================================================
INFO: RX2 PIN is OK
================================================
>>  CMT Rootkey Hash CERT : NOLO
>>  CMT Rootkey Hash CERT : KEYS
>>  CMT Rootkey Hash CERT : PRIMAPP
>>  CMT Rootkey Hash CERT : PASUBTOC
>>  CMT Rootkey Hash CERT : PAPUBKEYS [C6B9354E81AC464DED33FC7B90295086150F4539]
>>  CMT Rootkey Hash CERT : UPDAPP
>>  CMT Rootkey Hash CERT : DSP0
>>  CMT Rootkey Hash CERT : MCUSW
ContinueFlash_DCT5 Complete
STATUS_REQUEST_BB5...
1  Sub Block ID      : 14 STATUS_NOR_OK_BB5
           Block Length      : 01
           BB ASIC Index     : 00
Continue Flash Complete :  : No Error - 0 (0x00)
Time Taken to Flash  : 00:00:54

Processing Image File : 
 C:\Program Files (x86)\Common Files\Nokia\DataPackage\Products\RM-635\rm635__10.10.ppm_m_n
CMT Type                   :  BB5
CMT Algorithm              :  BB5 ALGORITHM
Secondary Sending Speed    :  3250000 Hz
Algorithm Sending Speed    :  6500000 Hz
Program Sending Speed      :  6500000 Hz
Message Reading Speed      :  98000 Hz
Number of Blocks           :  216
Entry Point                :  0x00B6
Page Format                :  128K
Maximum Page Size          :  0x00004000

VPP Enabled by Software
Using Internal VPP
StartErase_DCT5...
BlockLength  :  0x0E  (14)
ERASE Blocks :  0x01  (1)
     0   ERASE_AREA_BB5 0x12
            Block Length     : 0x0B (11)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x00 NOR
            Device Index     : 0x00
               0             : 01520000-01DBFFFF

Erase_SendEraseBlock_BB5_NOR
Task in Progress... Please Wait...
STATUS_REQUEST_BB5...
1  Sub Block ID      : 14 STATUS_NOR_OK_BB5
           Block Length      : 01
           BB ASIC Index     : 00

Successfully erased..
Time Taken to Erase : 00:00:19
TRANSMISSION_TYPE_REQUEST_BB5 :  59 01 20 01 04 D9
ReturnedType : 04 DDR & 2TX
TransmissionTypeRequest_DCT5  : No Error - 0 (0x00)

Flashing Speed: 5.00 Mhz
Processing  : rm635__10.10.ppm_m_n
Total blocks to write : 216
ContinueFlash_DCT5 Complete
STATUS_REQUEST_BB5...
1  Sub Block ID      : 14 STATUS_NOR_OK_BB5
           Block Length      : 01
           BB ASIC Index     : 00
Continue Flash Complete :  : No Error - 0 (0x00)
Time Taken to Flash  : 00:00:09

Processing Image File : 
 C:\Program Files (x86)\Common Files\Nokia\DataPackage\Products\RM-635\rm635__10.10.image_m_n_black
CMT Type                   :  BB5
CMT Algorithm              :  BB5 ALGORITHM
Secondary Sending Speed    :  3250000 Hz
Algorithm Sending Speed    :  6500000 Hz
Program Sending Speed      :  6500000 Hz
Message Reading Speed      :  98000 Hz
Number of Blocks           :  368
Entry Point                :  0x00C8
Page Format                :  128K
Maximum Page Size          :  0x00004000

VPP Enabled by Software
Using Internal VPP
StartErase_DCT5...
BlockLength  :  0x16  (22)
ERASE Blocks :  0x01  (1)
     0   ERASE_AREA_BB5 0x12
            Block Length     : 0x13 (19)
            BB ASIC Index    : 0x00 CMT
            Device Type      : 0x00 NOR
            Device Index     : 0x00
               0             : 01DC0000-0215FFFF
               1             : 02160000-03FBFFFF

Erase_SendEraseBlock_BB5_NOR
Task in Progress... Please Wait...
STATUS_REQUEST_BB5...
1  Sub Block ID      : 14 STATUS_NOR_OK_BB5
           Block Length      : 01
           BB ASIC Index     : 00

Successfully erased..
Time Taken to Erase : 00:01:20
TRANSMISSION_TYPE_REQUEST_BB5 :  59 01 20 01 04 D9
ReturnedType : 04 DDR & 2TX
TransmissionTypeRequest_DCT5  : No Error - 0 (0x00)

Flashing Speed: 5.00 Mhz
Processing  : rm635__10.10.image_m_n_black
Total blocks to write : 368
ContinueFlash_DCT5 Complete
STATUS_REQUEST_BB5...
1  Sub Block ID      : 14 STATUS_NOR_OK_BB5
           Block Length      : 01
           BB ASIC Index     : 00
Continue Flash Complete :  : No Error - 0 (0x00)
Time Taken to Flash  : 00:00:14

Total Flash Write Time (Flashing Only) : 00:01:18
Total Flashing Time (Booting + Erase + Flashing) : 00:04:43


Waiting for Phone to Go Online...
Elapsed Time: 1s
Elapsed Time: 2s
Elapsed Time: 3s
Elapsed Time: 4s
Elapsed Time: 5s
Elapsed Time: 6s
Elapsed Time: 7s
Elapsed Time: 8s
Elapsed Time: 9s
Elapsed Time: 10s

================================================
             Basic Phone Information             
================================================

binadam23 · 02-05-2014, 09:52

@Advance-Box and @all, Please Help..

..::Angel::.. · 02-05-2014, 11:52

Hi, flash your phone with most recent firmware version 10.65. It should be oki.

BR

02-04-2014, 08:11	#1 (permalink)
binadam23 Freak Poster Join Date: May 2013 Location: Nigeria Posts: 435 Member: 1931004 Status: Offline Sonork: 100.1662382 Thanks Meter: 85	Nokia 2690 Flash Error... 1 Sub Block ID : 16 PROGRAMMING_ERROR_BB5 I Try All my best but still getting the error bellow: ================================================ INFO: RX2 PIN is OK ================================================ >> CMT Rootkey Hash CERT : NOLO >> CMT Rootkey Hash CERT : KEYS >> CMT Rootkey Hash CERT : PRIMAPP >> CMT Rootkey Hash CERT : PASUBTOC >> CMT Rootkey Hash CERT : PAPUBKEYS >> CMT Rootkey Hash CERT : UPDAPP >> CMT Rootkey Hash CERT : DSP0 >> CMT Rootkey Hash CERT : MCUSW >> CMT Rootkey Hash CERT : PMM_CONF >> CMT Rootkey Hash CERT : SBIF_CONF ContinueFlash_DCT5 Complete Status_BB5 STATUS_REQUEST_BB5.. 1 Sub Block ID : 16 PROGRAMMING_ERROR_BB5 Block Length : 0F BB ASIC Index : 00 Error Type : 01 Error Spec : 06 Of*****ng Address : 003FC400 Expected Content : 0000D06D Detected Content : 0000D06D Try to change the Flashing clock... Flashing FAILED BB5_WRITE_FlashFile_0 Go to Settings --> Nokia Settings --> FBUS DDR&2TX Synchronization Timeout Change the current value selected to a higher value and Restart AdvanceBox.exe software to apply it Operations Failed.... And i also configure the atf like in this link: http://forum.gsmhosting.com/vbb/7381772-post5.html

02-04-2014, 08:16	#2 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	@binadam23 What ATF Version are you using?

02-04-2014, 08:52	#4 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	@binadam23 Try with latest atf v11.00

02-04-2014, 08:55	#5 (permalink)
binadam23 Freak Poster Join Date: May 2013 Location: Nigeria Posts: 435 Member: 1931004 Status: Offline Sonork: 100.1662382 Thanks Meter: 85	ok now updating it already...

02-04-2014, 08:56	#6 (permalink)
binadam23 Freak Poster Join Date: May 2013 Location: Nigeria Posts: 435 Member: 1931004 Status: Offline Sonork: 100.1662382 Thanks Meter: 85	but note am using the atf+ufc4

02-04-2014, 08:59	#7 (permalink)
binadam23 Freak Poster Join Date: May 2013 Location: Nigeria Posts: 435 Member: 1931004 Status: Offline Sonork: 100.1662382 Thanks Meter: 85	because when i try with the usb am getting this: ERROR: Use FBUS Connection for this Phone... ================================================== ==== The CPU of this Phone is not capable of USB New Protocol Communication ================================================== ====

02-04-2014, 09:02	#8 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	@binadam23 Yes,, ATF is telling you correct INFO. If phone is dead, you cannot USB flash it because: ================================================== ==== The CPU of this Phone is not capable of USB New Protocol Communication ================================================== ====

02-04-2014, 09:09	#9 (permalink)
binadam23 Freak Poster Join Date: May 2013 Location: Nigeria Posts: 435 Member: 1931004 Status: Offline Sonork: 100.1662382 Thanks Meter: 85	Now After Update Am getting new Error: SearchForBootstrap_DCT5.. ERROR: SECONDARY LOADER NOT FOUND ERROR: Sending Loader Failed... ERROR: FBUS Boot FAILED ================================================ Basic Phone Information ================================================ ================================================== ==== Selected VPL File: RM635_0592085_10.10_028.vpl ================================================== ==== Variant Details : RM-635 MEA M_N BLACK LATIN MEA18 Software Version : 10.10 Product Type : RM-635 Product Code : 0592085 Variant Version : 028

02-04-2014, 15:56	#10 (permalink)
azeem jeddah Junior Member Join Date: Dec 2013 Posts: 20 Member: 2085842 Status: Offline Sonork: 100.28977 Thanks Meter: 2	br use good fbus cable then flash .this model usb flashing problem and every time error

02-05-2014, 09:52	#14 (permalink)
binadam23 Freak Poster Join Date: May 2013 Location: Nigeria Posts: 435 Member: 1931004 Status: Offline Sonork: 100.1662382 Thanks Meter: 85	@Advance-Box and @all, Please Help..

02-05-2014, 11:52	#15 (permalink)
..::Angel::.. No Life Poster Join Date: Dec 2006 Location: Karachi, Pakistan Age: 33 Posts: 16,237 Member: 643472 Status: Offline Sonork: 100.96901 Thanks Meter: 16,589	Hi, flash your phone with most recent firmware version 10.65. It should be oki. BR