Nokia 520 RM-914 Flash with RM-915 - HELP !

[zakiyyboss]

Nokia 520 RM-914 Flash with RM-915 now phone dead try with JTAG but getting problem !!

ATF JTAG v1.0.15.8544 (6/17/2015)
Default language ID 0x0409, LR 14
JTAG Interface Connected, S/N 0x910025A8
Resetting and Exploring JTAG chain...No Devices found in Chain!
Loading AFP (Please Wait)...OK
AFP revision 4, compiled 7/4/2014 5:08:00 PM

================================================== ========
Phone Type : Lumia 520 RM-915
CPU Type : Qualcomm MSM8227
Storage Type: eMMC 8GB
Boot Package: 3056.40000.1402.0008 (BIG BOOT)
================================================== ========

1. Make sure JTAG Connection is 100% OK
2. Always Disconnect the Phone BATTERY
3. Connect USB Cable to Phone
4. Connect RJ-45 JTAG Cable to ATF Box
5. Select the Correct Phone Type RM-XXX
6. Use RESET JTAG button to check the JTAG Connection
7. Click RESTORE BOOT button to Start Boot Repairs
----------------------------------------------------------

Resetting and Exploring JTAG chain...No Devices found in Chain!
Resetting and Exploring JTAG chain...No Devices found in Chain!
Resetting and Exploring JTAG chain...No Devices found in Chain!
Resetting and Exploring JTAG chain...1 Device(s)
Device #1 ID 0x4F1F0F0F IR4
Restore Boot...
Waiting for Device Connection 15 second(s)...OK
Resetting and Exploring JTAG chain...OK
Halting Core with 100ms Delay...OK
Initializing Device...OK
Detecting eMMC #1 ID...eMMC Timeout, Status 0x00000000

[zakiyyboss]

I tried another thing on ATF.. and it SOLVED !!

Windows Phone 8/8.1/10 Flashing Started
Loading Flash Files Please Wait...

[DEAD BOOT REPAIR via USB is SUPPORTED]

================================================== ====
Windows Phone 8/8.1/10 Lumia Flasher
================================================== ====

If the Phone is ALIVE
1. Power On the Phone and Connect it to the USB Port

If the Phone is DEAD
1. Connect Phone to the USB Port
2. Press and Hold the VOLUME DOWN and POWER Buttons
3. Wait until the Phone Vibrates Shortly...
4. Stop Pressing the Buttons...

If the Phone is DEAD BOOT
1. Connect Phone to the USB Port
2. Install Correct Drivers:
"Nokia Emergency Connectivity" Located at:

C:\AdvanceBox Turbo Flasher\Driver\NOKIA_X2_USB_DRIVERS\
================================================== ====

SBL2 OK
Looking for SBL3...
SBL3 OK
Looking for UEFI...
UEFI OK
Looking for RPM...
RPM OK
Looking for TZ...
TZ OK
Looking for WINSECAPP...
WINSECAPP OK
Extracting Partitions Done!
Start Writing eMMC Blocks at : 0x00000000
Start Writing eMMC Blocks at : 0x01000000
Start Writing eMMC Blocks at : 0x01200000
Start Writing eMMC Blocks at : 0x01400000
Start Writing eMMC Blocks at : 0x01600000
Start Writing eMMC Blocks at : 0x01A00000
Start Writing eMMC Blocks at : 0x01C00000
Start Writing eMMC Blocks at : 0x01E00000
eMMC Write OK!
Closing Partition...
Partition Close OK!
BOOT WRITE DONE!
Waiting for USB Cycle...
USB Cycle OK!
Rebooting Phone...
Nokia Phone Info Mode Initiated...
Please wait upto 15 Seconds for SW Reset

1. Press and Hold the VOLUME DOWN and POWER
2. Wait until the Phone Reboots...
3. Wait until you see BIG "NOKIA" Logo
4. Stop Pressing the Buttons...
IMEI: 359998056214390
Version: 1.1.1.3
Product Code: 059S5T6
Module Code: 0205437

Continuing Previous Boot...
Please wait upto 30 Seconds for Boot Re-entry

Boot Flash Mode Successful...
Buffers Flushed OK...

Phone Info Query Start...
Blocks Returned: 0x07 Blocks
Block ID 0x01 : 00241000
Block ID 0x02 : 00240000
Block ID 0x03 : 00E74000
Block ID 0x05 : Nokia.MSM8227.P6036.1.2
Block ID 0x0D : 0001
Block ID 0x0F : 0301010100000101FF
Block ID 0x10 : 0100130000
Checking SD Card Size...
Card Size: 0x00000000
Checking Platform Security Status...
Platform Secure Boot Status: Active
Secure FFU EFUSE Status: Active
Debug Status: Active
RDC Status: Not Active
Authentication Status: Not Active
UEFI Secure Boot Status: Active
Checking Secure FFU Mode...
Secure FFU Mode :
Query Flash App Information...
Flash App Information: 02010F011C00
UEFI App: FLASH APP
Flash App Protocol Version: 1.15
Flash App Implementation Version: 1.28
Query ROOT KEY HASH...
ROOT_KEY_HASH: 7C81AABA97E4904DB782605A6C74A59480361E5A363337B2EF 5B8F925763110B
Query PUBLIC ID...
PUBLIC_ID: 453DC7FE88E61F54ECDCEB3BA36F3E4FF7CF3906
Query eMMC Info...
EMMC Manufacture ID: HYNIX
EMMC Product SN : 00D4AA71
EMMC_SIZE: 8 Gigabytes
Query Battery Charge Status...
BATTERY CHARGE_STATUS: 64%

Sending Image Signatures...
Image Signatures Accepted!
Erasing Data Partition...
Data Partition Erased Successfully
Preparing Buffers for DATA LOOP...
Allocating System RAM OK!
Start Sending DATA BLOCKS...
Finished Sending all DATA BLOCKS!
Exiting FLASH Mode via REBOOT...
Exit FLASH Mode Successful!

Flashing Done!
Total Flashing Time : 00:02:52