nokia 625 usb boot repair - GSM-Forum

Jeethesh · 12-26-2014, 06:16

Windows Phone 8/8.1 Flashing Started
Loading Flash Files Please Wait...
[DEAD BOOT REPAIR SUPPORTED]
                                                      
======================================================
          Windows Phone 8/8.1 Lumia Flasher           
======================================================
                                                      
If the Phone is ALIVE                                 
  1. Power On the Phone and Connect it to the USB Port
                                                      
If the Phone is DEAD                                  
  1. Connect Phone to the USB Port                    
  2. Press and Hold the VOLUME DOWN and POWER Buttons 
  3. Wait until the Phone Vibrates Shortly...         
  4. Stop Pressing the Buttons...                     
                                                      
If the Phone is DEAD BOOT                             
  1. Connect Phone to the USB Port                    
  2. Install Correct Drivers:                         
     "Nokia Emergency Connectivity"                   
======================================================
                                                      
Recovery Handle Found! - (WinUSB)
Sending Factory Loader...
Loader Upload Done!
Executing Loader...
Start Loader Done!
Waiting for USB Cycle...
USB Cycle OK!
Device Factory Mode OK!
USB Reconfiguration Done...
eMMC Detected OK...

Extracting Partitions from FFU...
Looking for SBL1...
SBL1 OK
Looking for SBL2...
SBL2 OK
Looking for SBL3...
SBL3 OK
Looking for UEFI...
UEFI OK
Looking for RPM...
RPM OK
Looking for TZ...
TZ OK
Looking for WINSECAPP...
WINSECAPP OK
Extracting Partitions Done!
Start Writing eMMC Blocks at : 0x00000000
Start Writing eMMC Blocks at : 0x01000000
ERROR: eMMC WRITE Failed at 0x2A000000
ERROR: Flashing Failed!

Advance-Box · 12-26-2014, 07:54

That's because USB Boot repair cannot fix all kinds of problems. It can be used effectively for phones killed by usb flashing related issues. Other than this, it is a hit or miss.

marvin03 · 01-20-2016, 08:02

any solution for this problem coz atf jtag doesnt detect even the solder was good

12-26-2014, 07:54	#2 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	That's because USB Boot repair cannot fix all kinds of problems. It can be used effectively for phones killed by usb flashing related issues. Other than this, it is a hit or miss.

01-20-2016, 08:02	#3 (permalink)
marvin03 No Life Poster Join Date: Apr 2009 Age: 41 Posts: 2,031 Member: 1015389 Status: Offline Sonork: 19830303 Thanks Meter: 526	any solution for this problem coz atf jtag doesnt detect even the solder was good