<<<o>>> <<< Resolve GREEN LIGHT Problems >>> <<<o>>> - Page 3 - GSM-Forum

**Advance-Box** · 07-09-2010, 03:13

@cdma-india

Hi, no need to replace anything... Just remove LT1930 and it's supporting components.
Then redirect VBATT to use the backup regulator and put the special firmware to the box.

All this can be done by following the first post of this thread.

asia_e4 · 07-12-2010, 09:57

hy, ATF Team,
I am new perchase atf box but its green light is not on,i install new vergen 5.50 and update firmware no any respons not info not connect any mobile so what can i do plz help me with thanks, here is my box logs.
AdvanceBox Turbo Flasher Found
Driver Version : 00020601
Library Version : 00030119
Initialize Device....
Init TRY : 1
Box Name : AdvanceBox Turbo
Box Firmware : LogiCore 7.07.10
Software Version : v5.50
AdvanceBox SN : 9CFF6A3C9D41F35DC478B338
BOX Status : ACTIVATED
INIT : OK

VBATT OFF ...
VBATT ON
Setting VBATT Done!...

obioha · 07-12-2010, 16:49

Quote:

Originally Posted by Robi-K

About 2 days ago my ATF box was working fine, the next day nothing worked with it.
I launch the program and its ok my box fimware ok, but cannot boot or check
any phone. Nor info.
It says Vbat off
Vbat on etc for over about 3 times.
The phone doesnt blink nor does it power on nothing.
Tried installing, uninstalling, 2 different pc plus 1 laptop. Nothing works.
Also only the yellow led on the RJ45 port lights up, the green one doesn't.
My question, do I need to replace the box or I can fix it myself? Am I having the same issue as a few members here?

Thanks in advance.
Regards

i have same problem right now,what do i do

**Advance-Box** · 07-12-2010, 16:56

@obioha

It can be easily fixed by you or your reseller. Once it is fixed, it will never go back
to same problem again and you do not have to replace any parts at all. We already
removed the LT1930 in the new batches of PCB. It takes less than 15 minutes to
perform the pcb modification. And your box will still function the same as before
and you get some free 1.5 GB extra from our download servers as well.

B/R

obioha · 07-13-2010, 09:29

Quote:

Originally Posted by Advance-Box

@obioha

It can be easily fixed by you or your reseller. Once it is fixed, it will never go back
to same problem again and you do not have to replace any parts at all. We already
removed the LT1930 in the new batches of PCB. It takes less than 15 minutes to
perform the pcb modification. And your box will still function the same as before
and you get some free 1.5 GB extra from our download servers as well.

B/R

so how do i fix it,and what about the warranty

gamal hussein · 07-13-2010, 10:00

how much atf have light pls help me withe pic ..........................help me atf

1 SYSTEM_ASIC_ID 01
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00000001
ID DWORD 1 : 00000226
ID DWORD 2 : 00000001
ID DWORD 3 : 020C1921
ID DWORD 4 : 02034100
2 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00001040
3 ROM_ID 15
Block Length : 5 (05)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 00001030
4 PUBLIC_ID 12
Block Length : 21 (15)
BB ASIC Index : 0 (00) CMT
ID DWORD 0 : 27D0020B
ID DWORD 1 : A7400E49
ID DWORD 2 : DFF1905E
ID DWORD 3 : 187B1DBC
ID DWORD 4 : 2102763D
5 ASIC_MODE_ID 13
Block Length : 2 (02)
BB ASIC Index : 0 (00) CMT
Mode Id : 00
6 ROOT_KEY_HASH 14
Block Length : 17 (11)
BB ASIC Index : 0 (00) CMT
Hash : 7B 04 54 00 E1 75 20 22 F9 EB 80 B0 DE A9 C6 5D
7 ROM_ID 15
Block Length : 9 (09)
BB ASIC Index : 0 (00) CMT
CRC 0 : 67E82268
CRC 1 : F29CEA60
Checksum F1
SearchForBootstrap_DCT5..
CMT Loader : C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\Old\RAP3Gv40_2nd.fg
PrepareBootstrapFile_DCT5 replaced "SILO" with "2ND\0"
PrepareBootstrapFile_DCT5 replaced "BOOT_MEDIAX" with "BOOT_MEDIA0"
SearchForBootstrap_DCT5 : No Error - 0 (0x00)
Secondary Loader Sent...
TransmissionTypeRequest_DCT5_NewProtocol TRANSMISSION_TYPE_REQUEST_BB5 GET_PROTOCOLS_BB5
TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 3E 00 C0
TransmissionTypeRequest_DCT5_NewProtocol FPIF_TRANSMISSION_MODE_LIST_BB5 using default mode 04 DDRand2TX
TRANSMISSION_TYPE_REQUEST_BB5 : 59 02 41 02 04 00 36 03 00 00 61 1C
Transmission Type Request Sent...
ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000)..
MCU_CONFIGURATION_RESPONSE_BB5:
ERROR : Sending Loader Failed, CHECK PHONE RX2 PINOUT
ERROR : Sending Loader Failed, CHECK PHONE RX2 PINOUT

faisal.u7 · 07-14-2010, 17:13

thanks sir keep it up

**Advance-Box** · 07-14-2010, 17:30

@gamal hussein

This is RAP3Gv4 Phone and it requires a good QUALITY wire for the cable.

Tell me the brand of your cable and I will PM to you how to fix the manufacturer's
short comings...

B/R

cdma-india · 07-14-2010, 20:43

Quote:

Originally Posted by Advance-Box

@cdma-india

Hi, no need to replace anything... Just remove LT1930 and it's supporting components.
Then redirect VBATT to use the backup regulator and put the special firmware to the box.

All this can be done by following the first post of this thread.

my box is working fine after modification ,thanks atf team

varos$-7 · 07-15-2010, 22:01

This is a great punch, but xara cool Turbo Flasher

ALKALAJE7M · 07-18-2010, 12:07

thanks atf team thanks..............

stargsm_ro · 07-18-2010, 17:58

Quote:

Originally Posted by Advance-Box

@obioha
We already
removed the LT1930 in the new batches of PCB. It takes less than 15 minutes to
perform the pcb modification. And your box will still function the same as before
and you get some free 1.5 GB extra from our download servers as well.

B/R

After remove components of PCB and install special firmware is OK to make "restore Box" or Update firmware?
Thank's!

X-Shadow · 07-19-2010, 04:35

@stargsm_ro

"Restore Box"

Do not forget that "STEP 2" inside the modify_pcb.rar

B/R

stargsm_ro · 07-19-2010, 07:43

Quote:

Originally Posted by X-Shadow

@stargsm_ro

"Restore Box"

Do not forget that "STEP 2" inside the modify_pcb.rar

B/R

I make Step 1,2,3 and is OK. After this i try "restore box" and is ok !
Thank's!

simnana · 07-23-2010, 12:11

hi all the product supporter pls guide me for the problem in my atf box when i m connecting my atf it is not showing found new hardware or detecting new hardware only green light blinking continuously pls its urgent

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-09-2010, 03:13	#31 (permalink)
Advance-Box Product Manager Join Date: Dec 2007 Posts: 4,525 Member: 651945 Status: Offline Thanks: 19 Thanked 13,144 Times in 2,208 Posts	@cdma-india Hi, no need to replace anything... Just remove LT1930 and it's supporting components. Then redirect VBATT to use the backup regulator and put the special firmware to the box. All this can be done by following the first post of this thread.

07-12-2010, 09:57	#32 (permalink)
asia_e4 Junior Member Join Date: Jan 2006 Posts: 12 Member: 223608 Status: Offline Thanks: 6 Thanked 0 Times in 0 Posts	hy, ATF Team, I am new perchase atf box but its green light is not on,i install new vergen 5.50 and update firmware no any respons not info not connect any mobile so what can i do plz help me with thanks, here is my box logs. AdvanceBox Turbo Flasher Found Driver Version : 00020601 Library Version : 00030119 Initialize Device.... Init TRY : 1 Box Name : AdvanceBox Turbo Box Firmware : LogiCore 7.07.10 Software Version : v5.50 AdvanceBox SN : 9CFF6A3C9D41F35DC478B338 BOX Status : ACTIVATED INIT : OK VBATT OFF ... VBATT ON Setting VBATT Done!...

07-12-2010, 16:56	#34 (permalink)
Advance-Box Product Manager Join Date: Dec 2007 Posts: 4,525 Member: 651945 Status: Offline Thanks: 19 Thanked 13,144 Times in 2,208 Posts	@obioha It can be easily fixed by you or your reseller. Once it is fixed, it will never go back to same problem again and you do not have to replace any parts at all. We already removed the LT1930 in the new batches of PCB. It takes less than 15 minutes to perform the pcb modification. And your box will still function the same as before and you get some free 1.5 GB extra from our download servers as well. B/R

07-13-2010, 10:00	#36 (permalink)
gamal hussein Crazy Poster Join Date: Mar 2010 Posts: 57 Member: 1271501 Status: Offline Thanks: 0 Thanked 4 Times in 3 Posts	how much atf have light pls help me withe pic ..........................help me atf 1 SYSTEM_ASIC_ID 01 Block Length : 21 (15) BB ASIC Index : 0 (00) CMT ID DWORD 0 : 00000001 ID DWORD 1 : 00000226 ID DWORD 2 : 00000001 ID DWORD 3 : 020C1921 ID DWORD 4 : 02034100 2 ROM_ID 15 Block Length : 5 (05) BB ASIC Index : 0 (00) CMT ID DWORD 0 : 00001040 3 ROM_ID 15 Block Length : 5 (05) BB ASIC Index : 0 (00) CMT ID DWORD 0 : 00001030 4 PUBLIC_ID 12 Block Length : 21 (15) BB ASIC Index : 0 (00) CMT ID DWORD 0 : 27D0020B ID DWORD 1 : A7400E49 ID DWORD 2 : DFF1905E ID DWORD 3 : 187B1DBC ID DWORD 4 : 2102763D 5 ASIC_MODE_ID 13 Block Length : 2 (02) BB ASIC Index : 0 (00) CMT Mode Id : 00 6 ROOT_KEY_HASH 14 Block Length : 17 (11) BB ASIC Index : 0 (00) CMT Hash : 7B 04 54 00 E1 75 20 22 F9 EB 80 B0 DE A9 C6 5D 7 ROM_ID 15 Block Length : 9 (09) BB ASIC Index : 0 (00) CMT CRC 0 : 67E82268 CRC 1 : F29CEA60 Checksum F1 SearchForBootstrap_DCT5.. CMT Loader : C:\AdvanceBox Turbo Flasher\Nokia\BB5_Loader\Old\RAP3Gv40_2nd.fg PrepareBootstrapFile_DCT5 replaced "SILO" with "2ND\0" PrepareBootstrapFile_DCT5 replaced "BOOT_MEDIAX" with "BOOT_MEDIA0" SearchForBootstrap_DCT5 : No Error - 0 (0x00) Secondary Loader Sent... TransmissionTypeRequest_DCT5_NewProtocol TRANSMISSION_TYPE_REQUEST_BB5 GET_PROTOCOLS_BB5 TRANSMISSION_TYPE_REQUEST_BB5 : 59 01 3E 00 C0 TransmissionTypeRequest_DCT5_NewProtocol FPIF_TRANSMISSION_MODE_LIST_BB5 using default mode 04 DDRand2TX TRANSMISSION_TYPE_REQUEST_BB5 : 59 02 41 02 04 00 36 03 00 00 61 1C Transmission Type Request Sent... ConfigurationRequest_DCT5 (RAM_SIZE_BB5 0x0000).. MCU_CONFIGURATION_RESPONSE_BB5: ERROR : Sending Loader Failed, CHECK PHONE RX2 PINOUT ERROR : Sending Loader Failed, CHECK PHONE RX2 PINOUT

07-14-2010, 17:13	#37 (permalink)
faisal.u7 Freak Poster Join Date: May 2009 Location: pakistan Posts: 457 Member: 1028120 Status: Offline Sonork: 100.1607216 Thanks: 423 Thanked 73 Times in 53 Posts	thanks sir keep it up

07-14-2010, 17:30	#38 (permalink)
Advance-Box Product Manager Join Date: Dec 2007 Posts: 4,525 Member: 651945 Status: Offline Thanks: 19 Thanked 13,144 Times in 2,208 Posts	@gamal hussein This is RAP3Gv4 Phone and it requires a good QUALITY wire for the cable. Tell me the brand of your cable and I will PM to you how to fix the manufacturer's short comings... B/R

07-15-2010, 22:01	#40 (permalink)
varos$-7 Insane Poster Join Date: Jul 2010 Location: Arab-ABO_ALI Age: 28 Posts: 83 Member: 1345714 Status: Offline Sonork: Syria - Aleppo Thanks: 40 Thanked 7 Times in 7 Posts	This is a great punch, but xara cool Turbo Flasher

07-18-2010, 12:07	#41 (permalink)
ALKALAJE7M Insane Poster Join Date: Jul 2010 Location: Arabic Age: 28 Posts: 87 Member: 1346554 Status: Offline Sonork: Syria-Aleppo Thanks: 40 Thanked 10 Times in 9 Posts	thanks atf team thanks..............

07-19-2010, 04:35	#43 (permalink)
X-Shadow No Life Poster Join Date: Jan 2000 Location: GSM Forum Posts: 1,101 Member: 871 Status: Offline Thanks: 1 Thanked 591 Times in 133 Posts	@stargsm_ro "Restore Box" Do not forget that "STEP 2" inside the modify_pcb.rar B/R

07-23-2010, 12:11	#45 (permalink)
simnana Junior Member Join Date: Feb 2008 Posts: 22 Member: 711504 Status: Offline Thanks: 3 Thanked 8 Times in 2 Posts	hi all the product supporter pls guide me for the problem in my atf box when i m connecting my atf it is not showing found new hardware or detecting new hardware only green light blinking continuously pls its urgent