Repair dead I9505 - (SOLVED!!! - SOLUTION via USB INSIDE) - Page 3 - GSM-Forum

svetoslakis · 12-01-2014, 23:06

1. Connect Battery to Phone...
2. Connect USB Cable to Phone...

Recovery Handle Found! - (Qualcomm)
Sending Factory Loader...
Loader Upload Done!
Executing Loader...
Start Loader Done!
Waiting for USB Cycle...
USB Cycle OK!
Device Factory Mode OK!
USB Reconfiguration Done...
eMMC Detected OK...

ERROR: QC Request Timeout 0x1B:

1. Connect Battery to Phone...
2. Connect USB Cable to Phone...

Recovery Handle Found! - (Qualcomm)
Sending Factory Loader...
Loader Upload Done!
Executing Loader...
Start Loader Done!
Waiting for USB Cycle...
USB Cycle OK!
Device Factory Mode OK!
USB Reconfiguration Done...
ERROR: QC Request Timeout 0x01:

used Qualcom Usb Drivers win 7

allumts · 12-01-2014, 23:12

Quote:

Originally Posted by svetoslakis

1. Connect Battery to Phone...
2. Connect USB Cable to Phone...

Recovery Handle Found! - (Qualcomm)
Sending Factory Loader...
Loader Upload Done!
Executing Loader...
Start Loader Done!
Waiting for USB Cycle...
USB Cycle OK!
Device Factory Mode OK!
USB Reconfiguration Done...
eMMC Detected OK...

ERROR: QC Request Timeout 0x1B:

1. Connect Battery to Phone...
2. Connect USB Cable to Phone...

Recovery Handle Found! - (Qualcomm)
Sending Factory Loader...
Loader Upload Done!
Executing Loader...
Start Loader Done!
Waiting for USB Cycle...
USB Cycle OK!
Device Factory Mode OK!
USB Reconfiguration Done...
ERROR: QC Request Timeout 0x01:

used Qualcom Usb Drivers win 7

Sure has use "Qualcomm Usb Drivers"?
Post screen od "Device Manager"
BR
allumts

Advance-Box · 12-02-2014, 01:48

@svetoslakis

Easiest way to avoid problems is to use Nokia Emergency Connectivity Drivers...

Because there are many kinds of qualcomm drivers and I cannot support of them all at once.

But there is only 1 kind of Nokia Emergency Connectivity driver, and this can be used on SAMSUNG phones as well.

More info about installing Nokia Emergency Connectivity Drivers here:
http://forum.gsmhosting.com/vbb/10702398-post2.html

Of course, this BOOT REPAIR Method only works on GT-i9505...

Lucas-m · 02-09-2015, 18:31

Can U please create a same repair via usb software for samsung note 2 N7100 ?

Thx in advance !

allumts · 02-09-2015, 21:46

@Lucas-m, first of post read all thread.
N7100 is Exinos based and how can read above this method work only for I9505 Qualcomm based, (for now...i want to hope).

BR
allumts

Bruno Rafael · 03-07-2015, 16:59

i try and show-me this error?

Please Update Important Files
Goto "Product Support" tab then
Click "Update Files" tab then
Click "UPDATE IMPORTANT FILES" button
1. Connect Battery to Phone...
2. Connect USB Cable to Phone...

Recovery Handle Found! - (Qualcomm)
ERROR: Cannot Open COM PORT

I reinstal drivers and some error...

Bruno Rafael · 03-07-2015, 17:12

this is a screen for my error!

allumts · 03-07-2015, 23:41

Update you box to last version 12.05 and loock if are using right drivers, if not have Riff or other box that use same Drivers

Bruno Rafael · 03-09-2015, 11:48

@allumts

i update my box , update drivers, but some problem:

1. Connect Battery to Phone...
2. Connect USB Cable to Phone...

Recovery Handle Found! - (Qualcomm)
Sending Factory Loader...
Loader Upload Done!
Executing Loader...
Start Loader Done!
Waiting for USB Cycle...
USB Cycle OK!
Device Factory Mode OK!
USB Reconfiguration Done...
eMMC Detected OK...

ERROR: QC Request Timeout 0x1B:

ps:i try this:http://forum.gsmhosting.com/vbb/10702398-post2.html
But, my pc wont install this drivers!, install only qualcomm hs-usb QDloader 9008

i need repair this phone..

allumts · 03-09-2015, 17:32

I have used the "Emergency Drivers" and have restored this I9505.

Please if you has download the package can see there are 2 .Bin Boot file, can post screen of you "Device manager" open with "qhsusb_dload_Drivers" installed and with "Scan EMMC " from emmc tabulate, want see where's you problem

Quote:

ERROR: QC Request Timeout 0x1B:

for me error is in drivers...try from a pc where you not have also Riff installed or Medusa or other "qhsusb" drivers installed

Bruno Rafael · 03-10-2015, 22:49

now program close in process!!!

allumts · 03-11-2015, 15:04

Quote:

Originally Posted by Bruno Rafael

now program close in process!!!

Had start to write? if yes many time can be any conflict with other running program... try from other pc if can, now drivers are ok

gilica_gsm · 03-11-2015, 21:08

hy
1. Connect Battery to Phone...
2. Connect USB Cable to Phone...

Recovery Handle Found! - (Qualcomm)
Sending Factory Loader...
Loader Upload Done!
Executing Loader...
Start Loader Done!
Waiting for USB Cycle...
USB Cycle OK!
Device Factory Mode OK!
USB Reconfiguration Done...
eMMC Detected OK...

Start Writing eMMC Blocks at : 0x00000000
ERROR: eMMC READ Failed at 0x0000CC00

1. Connect Battery to Phone...
2. Connect USB Cable to Phone...

Recovery Handle Found! - (Qualcomm)
Sending Factory Loader...
Loader Upload Done!
Executing Loader...
Start Loader Done!
Waiting for USB Cycle...
USB Cycle OK!
Device Factory Mode OK!
USB Reconfiguration Done...
eMMC Detected OK...

Start Writing eMMC Blocks at : 0x00000000
ERROR: eMMC READ Failed at 0x0000D000

rgds

Bruno Rafael · 03-12-2015, 13:19

Quote:

Originally Posted by allumts

Had start to write? if yes many time can be any conflict with other running program... try from other pc if can, now drivers are ok

i try in 2 pc...now i try in 1 NEW laptop...wait result!!!!

allumts · 03-12-2015, 17:00

@Bruno Rafael,

try last time via Usb if not have success at this time i can think you eMMc can be damaged.... last way that can try is via JTAG, I9505 is qualcomm platform and can be solve with Jtag, if also fail...then replace eMMc chip..

BR
allumts

12-01-2014, 23:06	#31 (permalink)
svetoslakis No Life Poster Join Date: Apr 2011 Location: Bulgaria Age: 53 Posts: 667 Member: 1559599 Status: Offline Thanks Meter: 222	1. Connect Battery to Phone... 2. Connect USB Cable to Phone... Recovery Handle Found! - (Qualcomm) Sending Factory Loader... Loader Upload Done! Executing Loader... Start Loader Done! Waiting for USB Cycle... USB Cycle OK! Device Factory Mode OK! USB Reconfiguration Done... eMMC Detected OK... ERROR: QC Request Timeout 0x1B: 1. Connect Battery to Phone... 2. Connect USB Cable to Phone... Recovery Handle Found! - (Qualcomm) Sending Factory Loader... Loader Upload Done! Executing Loader... Start Loader Done! Waiting for USB Cycle... USB Cycle OK! Device Factory Mode OK! USB Reconfiguration Done... ERROR: QC Request Timeout 0x01: used Qualcom Usb Drivers win 7

12-02-2014, 01:48	#33 (permalink)
Advance-Box No Life Poster Join Date: Dec 2007 Posts: 7,598 Member: 651945 Status: Offline Thanks Meter: 20,118	@svetoslakis Easiest way to avoid problems is to use Nokia Emergency Connectivity Drivers... Because there are many kinds of qualcomm drivers and I cannot support of them all at once. But there is only 1 kind of Nokia Emergency Connectivity driver, and this can be used on SAMSUNG phones as well. More info about installing Nokia Emergency Connectivity Drivers here: http://forum.gsmhosting.com/vbb/10702398-post2.html Of course, this BOOT REPAIR Method only works on GT-i9505...

02-09-2015, 18:31	#34 (permalink)
Lucas-m Junior Member Join Date: Feb 2004 Location: Ireland Dublin Age: 42 Posts: 18 Member: 53293 Status: Offline Thanks Meter: 6	Can U please create a same repair via usb software for samsung note 2 N7100 ? Thx in advance !

02-09-2015, 21:46	#35 (permalink)
allumts No Life Poster Join Date: Apr 2011 Age: 58 Posts: 16,408 Member: 1564612 Status: Offline Thanks Meter: 12,343	@Lucas-m, first of post read all thread. N7100 is Exinos based and how can read above this method work only for I9505 Qualcomm based, (for now...i want to hope). BR allumts

03-07-2015, 16:59	#36 (permalink)
Bruno Rafael No Life Poster Join Date: Feb 2008 Location: Brazil Age: 41 Posts: 1,316 Member: 700706 Status: Offline Sonork: 100.1590381 Thanks Meter: 208	i try and show-me this error? Please Update Important Files Goto "Product Support" tab then Click "Update Files" tab then Click "UPDATE IMPORTANT FILES" button 1. Connect Battery to Phone... 2. Connect USB Cable to Phone... Recovery Handle Found! - (Qualcomm) ERROR: Cannot Open COM PORT I reinstal drivers and some error...

03-07-2015, 23:41	#38 (permalink)
allumts No Life Poster Join Date: Apr 2011 Age: 58 Posts: 16,408 Member: 1564612 Status: Offline Thanks Meter: 12,343	Update you box to last version 12.05 and loock if are using right drivers, if not have Riff or other box that use same Drivers

03-09-2015, 11:48	#39 (permalink)
Bruno Rafael No Life Poster Join Date: Feb 2008 Location: Brazil Age: 41 Posts: 1,316 Member: 700706 Status: Offline Sonork: 100.1590381 Thanks Meter: 208	@allumts i update my box , update drivers, but some problem: 1. Connect Battery to Phone... 2. Connect USB Cable to Phone... Recovery Handle Found! - (Qualcomm) Sending Factory Loader... Loader Upload Done! Executing Loader... Start Loader Done! Waiting for USB Cycle... USB Cycle OK! Device Factory Mode OK! USB Reconfiguration Done... eMMC Detected OK... ERROR: QC Request Timeout 0x1B: ps:i try this:http://forum.gsmhosting.com/vbb/10702398-post2.html But, my pc wont install this drivers!, install only qualcomm hs-usb QDloader 9008 i need repair this phone..

03-11-2015, 21:08	#43 (permalink)
gilica_gsm No Life Poster Join Date: Oct 2004 Location: Romania, Bistrita Age: 70 Posts: 856 Member: 85467 Status: Offline Thanks Meter: 104	hy 1. Connect Battery to Phone... 2. Connect USB Cable to Phone... Recovery Handle Found! - (Qualcomm) Sending Factory Loader... Loader Upload Done! Executing Loader... Start Loader Done! Waiting for USB Cycle... USB Cycle OK! Device Factory Mode OK! USB Reconfiguration Done... eMMC Detected OK... Start Writing eMMC Blocks at : 0x00000000 ERROR: eMMC READ Failed at 0x0000CC00 1. Connect Battery to Phone... 2. Connect USB Cable to Phone... Recovery Handle Found! - (Qualcomm) Sending Factory Loader... Loader Upload Done! Executing Loader... Start Loader Done! Waiting for USB Cycle... USB Cycle OK! Device Factory Mode OK! USB Reconfiguration Done... eMMC Detected OK... Start Writing eMMC Blocks at : 0x00000000 ERROR: eMMC READ Failed at 0x0000D000 rgds

03-12-2015, 17:00	#45 (permalink)
allumts No Life Poster Join Date: Apr 2011 Age: 58 Posts: 16,408 Member: 1564612 Status: Offline Thanks Meter: 12,343	@Bruno Rafael, try last time via Usb if not have success at this time i can think you eMMc can be damaged.... last way that can try is via JTAG, I9505 is qualcomm platform and can be solve with Jtag, if also fail...then replace eMMc chip.. BR allumts