(RM-320) n95 8gb after flash white screen big problem!!!! - GSM-Forum

acelai00 · 02-02-2012, 09:02

dear bro...i have take the phone from custormer....

1st time problem is memory full ，phone work nice...

then i try to flash it with atf 35.0001 version...after flash phone is white screen when power on....

then i backup the rpl , do full erase ， full flash , write back rpl,repair simlock , repair sd , write full pm , write eno file rm320_ENO_x_2007wk45v0.020_sos.fpsx after that phone is goto test mode ， but insert battery try phone is white screen restart too....any solution???

i have try 2 set with this problem...

acelai00 · 02-02-2012, 09:30

log here~~~~

Basic Phone Information
================================================
MCU Version: V 06wk41v64.20 01-10-09 RM-320 (c) Nokia
IMEI Plain : 359542013802929
IMEI Spare : A359542013802920
IMEI SV : 33595420138029214F
Phone Model: Nokia N95 8GB
Category : Classic Phone
Phone Type : RM-320

================================================
Extended Phone Information
================================================
Product Serial Number: SHG437010
Product Code : 0557631
Basic Production Code: 0548236
Long Production SN : 0
MCU SW Version : V 06wk41v64.20 01-10-09 RM-320 (c) Nokia
HW Version : 4120
RFIC Version : 17141715
DSP Version : aino.ICPR62_08w28p2
Content : RM320_31.0.002_U01 ¥ RM320_003_000_M025
APE BT Version : HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10.
Content Pack Version : RM320_31.0.002_U01 r RM320_003_000_M025
AHNE Version : 11
APE SW Core Version : 35.0.001
APE Test Version : rm320_eno_2007wk45v0.020
RETU Version : 15
TAHVO Version : 22
APE HW Version : 1
APE ADSP SW Version : 256
Wireless LAN ID : 00:1E:3A:8F:19:F4
Bluetooth ID : 00:1E:3A:7F

7:B4
CS Type : GSM850, GSM900, GSM1800, GSM1900, WCDMA I

================================================
Simlock Information
================================================
CONFIG KEY : 0000000000000000
PROVIDER KEY : 2440700000000000
NETWORK NAME : Nokia Default;Finland
LOCK COUNTERS : KEYPRESS 0/3, FBUS 0/10
SIMLOCK TABLE :
Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open
Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open
SIMLOCK STATE : Not Locked

SIMLOCK_TYPE : PA_SL2
SIMLOCK_TEST : PASSED
SECURITY_TEST : PASSED
SECURITY_CODE : 12345
PHONE_MODE : TEST
DCC ID : NOT USED

Karlos007 · 02-02-2012, 09:42

Hi, If you perform selftests is everything ok (pass)?

Karel

Karlos007 · 02-02-2012, 09:48

...and did you tried * + 3 + call + power on (hard reset)?

acelai00 · 02-02-2012, 10:40

self test~

08-ST_MBUS_RX_TX_LOOP_TEST = minor

3B-ST_MAIN_LCD_IF_TEST = minor

other is all passed....

acelai00 · 02-02-2012, 10:41

Quote:

Originally Posted by Karlos007

...and did you tried * + 3 + call + power on (hard reset)?

this solution is no work for me bro~。。

..::Angel::.. · 02-02-2012, 10:48

@acelai00

Use this procedure, it should work if phone do not have any kind of hardware:

http://forum.gsmhosting.com/vbb/7746277-post16.html

acelai00 · 02-02-2012, 11:09

Quote:

Originally Posted by ..::Angel::..

@acelai00

Use this procedure, it should work if phone do not have any kind of hardware:

http://forum.gsmhosting.com/vbb/7746277-post16.html

this solution i have read and try before open thread bro...

step 88. Now flash the second ENO file to the phone, file name:
"normalize_susd_eno_aino_urel.fpsx"

Manually add the SINGLE file above in ATF Software and flash this
SINGLE file to your phone...

Flash Settings:

* uncheck Backup Simlocks
* uncheck Backup RPL
* uncheck Factory Reset

--> You will still get "Test Mode" on screen no work...when i input this file at mcu press flash atf no any respon....just write ( please wait load big file!!!) i wait long time but still no respon....

..::Angel::.. · 02-02-2012, 11:23

Quote:

Originally Posted by acelai00

this solution i have read and try before open thread bro...

step 88. Now flash the second ENO file to the phone, file name:
"normalize_susd_eno_aino_urel.fpsx"

Manually add the SINGLE file above in ATF Software and flash this
SINGLE file to your phone...

Flash Settings:

* uncheck Backup Simlocks
* uncheck Backup RPL
* uncheck Factory Reset

--> You will still get "Test Mode" on screen no work...when i input this file at mcu press flash atf no any respon....just write ( please wait load big file!!!) i wait long time but still no respon....

Hi,

If You have followed the full procedure written by AdvanceBox, then I would
suggest to chk phone hardware...

BR

**chand_gee** · 02-02-2012, 11:31

200% sure phone will be ok try this
try to rehot 8gb memory ic if not ok
remove memory ic you will see some damage prints

easir.comilla_e · 02-02-2012, 11:32

bor.........Nokia E63 Black Screen Problem....help..me

acelai00 · 02-02-2012, 11:58

Quote:

Originally Posted by ..::Angel::..

Hi,

If You have followed the full procedure written by AdvanceBox, then I would
suggest to chk phone hardware...

BR

thank your suggest bro...i try to check the mmc ic

acelai00 · 02-02-2012, 12:01

Quote:

Originally Posted by chand_gee

200% sure phone will be ok try this
try to rehot 8gb memory ic if not ok
remove memory ic you will see some damage prints

yes bro! i try check it and reply back~~~~

02-02-2012, 09:02	#1 (permalink)
acelai00 Registered User Join Date: Apr 2006 Location: malaysia Posts: 531 Member: 255011 Status: Offline Thanks Meter: 56	(RM-320) n95 8gb after flash white screen big problem!!!! dear bro...i have take the phone from custormer.... 1st time problem is memory full ，phone work nice... then i try to flash it with atf 35.0001 version...after flash phone is white screen when power on.... then i backup the rpl , do full erase ， full flash , write back rpl,repair simlock , repair sd , write full pm , write eno file rm320_ENO_x_2007wk45v0.020_sos.fpsx after that phone is goto test mode ， but insert battery try phone is white screen restart too....any solution???i have try 2 set with this problem...

02-02-2012, 09:30	#2 (permalink)
acelai00 Registered User Join Date: Apr 2006 Location: malaysia Posts: 531 Member: 255011 Status: Offline Thanks Meter: 56	log here~~~~ Basic Phone Information ================================================ MCU Version: V 06wk41v64.20 01-10-09 RM-320 (c) Nokia IMEI Plain : 359542013802929 IMEI Spare : A359542013802920 IMEI SV : 33595420138029214F Phone Model: Nokia N95 8GB Category : Classic Phone Phone Type : RM-320 ================================================ Extended Phone Information ================================================ Product Serial Number: SHG437010 Product Code : 0557631 Basic Production Code: 0548236 Long Production SN : 0 MCU SW Version : V 06wk41v64.20 01-10-09 RM-320 (c) Nokia HW Version : 4120 RFIC Version : 17141715 DSP Version : aino.ICPR62_08w28p2 Content : RM320_31.0.002_U01 ¥ RM320_003_000_M025 APE BT Version : HCI Version 3 (rev. 1740). LMP Version 3 (rev. 1740). Manufacturer 10. Content Pack Version : RM320_31.0.002_U01 r RM320_003_000_M025 AHNE Version : 11 APE SW Core Version : 35.0.001 APE Test Version : rm320_eno_2007wk45v0.020 RETU Version : 15 TAHVO Version : 22 APE HW Version : 1 APE ADSP SW Version : 256 Wireless LAN ID : 00:1E:3A:8F:19:F4 Bluetooth ID : 00:1E:3A:7F7:B4 CS Type : GSM850, GSM900, GSM1800, GSM1900, WCDMA I ================================================ Simlock Information ================================================ CONFIG KEY : 0000000000000000 PROVIDER KEY : 2440700000000000 NETWORK NAME : Nokia Default;Finland LOCK COUNTERS : KEYPRESS 0/3, FBUS 0/10 SIMLOCK TABLE : Block [1] 1:Open 2:Open 3:Open 4:Open 5:Open Block [2] 1:Open 2:Open 3:Open 4:Open 5:Open Block [3] 1:Open 2:Open 3:Open 4:Open 5:Open Block [4] 1:Open 2:Open 3:Open 4:Open 5:Open Block [5] 1:Open 2:Open 3:Open 4:Open 5:Open Block [6] 1:Open 2:Open 3:Open 4:Open 5:Open Block [7] 1:Open 2:Open 3:Open 4:Open 5:Open SIMLOCK STATE : Not Locked SIMLOCK_TYPE : PA_SL2 SIMLOCK_TEST : PASSED SECURITY_TEST : PASSED SECURITY_CODE : 12345 PHONE_MODE : TEST DCC ID : NOT USED

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
HELP!!! BACKGROUND SCREEN LOGO	Michael Go	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	11-23-2017 08:11
Seeking for flash nokia 5110 old version (3 version) can exchange for new	Tomas	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	8	10-14-2017 19:29
5110 flash new software , need help	steve	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	4	01-03-2015 05:41
Really big favour!	MiMiR the WiseMan	Nokia Legacy Phones ( DCT-1 ,2 ,3 ,L )	3	06-18-1999 03:21

02-02-2012, 09:42	#3 (permalink)
Karlos007 Freak Poster Join Date: Aug 2005 Location: Prague, Czech Republic Age: 41 Posts: 196 Member: 170013 Status: Offline Thanks Meter: 42	Hi, If you perform selftests is everything ok (pass)? Karel

02-02-2012, 09:48	#4 (permalink)
Karlos007 Freak Poster Join Date: Aug 2005 Location: Prague, Czech Republic Age: 41 Posts: 196 Member: 170013 Status: Offline Thanks Meter: 42	...and did you tried * + 3 + call + power on (hard reset)?

02-02-2012, 10:40	#5 (permalink)
acelai00 Registered User Join Date: Apr 2006 Location: malaysia Posts: 531 Member: 255011 Status: Offline Thanks Meter: 56	self test~ 08-ST_MBUS_RX_TX_LOOP_TEST = minor 3B-ST_MAIN_LCD_IF_TEST = minor other is all passed....

02-02-2012, 10:48	#7 (permalink)
..::Angel::.. No Life Poster Join Date: Dec 2006 Location: Karachi, Pakistan Age: 33 Posts: 16,237 Member: 643472 Status: Offline Sonork: 100.96901 Thanks Meter: 16,589	@acelai00 Use this procedure, it should work if phone do not have any kind of hardware: http://forum.gsmhosting.com/vbb/7746277-post16.html

02-02-2012, 11:31	#10 (permalink)
chand_gee Moderator Join Date: Jan 2008 Location: <jeddah al saudia> Age: 36 Posts: 2,261 Member: 668050 Status: Offline Sonork: 100.1656307 Thanks Meter: 991	200% sure phone will be ok try this try to rehot 8gb memory ic if not ok remove memory ic you will see some damage prints

02-02-2012, 11:32	#11 (permalink)
easir.comilla_e Freak Poster Join Date: Jan 2011 Posts: 434 Member: 1488757 Status: Offline Thanks Meter: 98	bor.........Nokia E63 Black Screen Problem....help..me