GSM Shop GSM Shop
GSM-Forum  

Welcome to the GSM-Forum forums.

You are currently viewing our boards as a guest which gives you limited access to view most discussions and access our other features.
Only registered members may post questions, contact other members or search our database of over 8 million posts.

Registration is fast, simple and absolutely free so please - Click to REGISTER!

If you have any problems with the registration process or your account login, please contact contact us .

Go Back   GSM-Forum > Product Support Sections > No More Supported Solutions (Dead Products) > No More Supported H/W Products > Advance-Box
Reload this Page Samsung SM-J700F/H/K/M/P/8 BOOT Repair via eMMC Flashing
Register FAQDonate Forum Rules Root any Device ★iPhone Unlock★ ★ Direct Codes ★ Direct Unlock Source Mark Forums Read


 
Page 22 of 27 « First 12192021 22 232425 Last »
 
LinkBack Thread Tools Display Modes
Old 07-03-2016, 10:06   #316 (permalink)
Freak Poster
 
Join Date: Jun 2012
Location: Iran-Behbahan
Age: 42
Posts: 464
Member: 1778926
Status: Offline
Thanks Meter: 60

hi help me pls
i got this error
eMMC Boot Information
Revision 1.0 (for MMC v4.0)
BOOT PARTITION : NOT BOOT ENABLED
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x1 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 0 KB
HC ERASE GROUP SIZE: 0 KB
USER AREA SIZE : 0 BYTES
BOOT PARTITION SIZE: 0 KB
RPMB PARTITION SIZE: 0 KB


eMMC Device Information
Manufacturer ID: TOSHIBA
Device Type : Embedded BGA
Application ID : 00
Product Name : 400073
Product Rev : 0.0
Product SN : A6823883
Manufactured : January 1999

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 8000 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
11010034303030373300A6823883A299.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\


MBR is Corrupted...
ERROR: PIT Partition NOT FOUND!
Please Provide a PIT File via Selecting "Re-Partition"
 
Old 07-04-2016, 06:15   #317 (permalink)
Freak Poster
 
Join Date: Jun 2012
Location: Iran-Behbahan
Age: 42
Posts: 464
Member: 1778926
Status: Offline
Thanks Meter: 60
pls masters help me ro solve my problem
 
Old 07-04-2016, 09:43   #318 (permalink)
No Life Poster
 
ashraf_bcs's Avatar
 
Join Date: Jun 2006
Location: Bangladesh
Posts: 2,545
Member: 303373
Status: Offline
Sonork: 100.1584377
Thanks Meter: 1,241
J700H success
================================================== ====
eMMC Test Point Connection Module
================================================== ====
================================================== ====

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.


Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : 11010034303030373300C2D04B75B245
CSD : D07E00320F5903FFFFFFFFE78A4000D1

eMMC Boot Information
Revision 1.7 (for MMC v5.0, v5.01)
BOOT PARTITION : BOOT PARTITION 1
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x4 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 4096 KB
HC ERASE GROUP SIZE: 4096 KB
USER AREA SIZE : 15758000128 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 4096 KB


eMMC Device Information
Manufacturer ID: TOSHIBA
Device Type : Embedded BGA
Application ID : 00
Product Name : 400073
Product Rev : 0.0
Product SN : C2D04B75
Manufactured : January 1999

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 8000 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
11010034303030373300C2D04B75B245.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\




Start Writing Flash Images...



Flash Image: sboot.bin
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 1

Total Elapsed Time 00:02:07
Write Success!


Flash Image: cm.bin
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 2

Total Elapsed Time 00:01:42
Write Success!


Total Images Written: 2
Process Done!
 
The Following 2 Users Say Thank You to ashraf_bcs For This Useful Post:
Old 07-04-2016, 09:53   #319 (permalink)
No Life Poster
 
ashraf_bcs's Avatar
 
Join Date: Jun 2006
Location: Bangladesh
Posts: 2,545
Member: 303373
Status: Offline
Sonork: 100.1584377
Thanks Meter: 1,241
Another one J700H
================================================== ====
eMMC Test Point Connection Module
================================================== ====
================================================== ====

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.


Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : 11010034303030373300AB4142B5A235
CSD : D07E00320F5903FFFFFFFFE78A4000D1

eMMC Boot Information
Revision 1.7 (for MMC v5.0, v5.01)
BOOT PARTITION : BOOT PARTITION 1
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x4 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 4096 KB
HC ERASE GROUP SIZE: 4096 KB
USER AREA SIZE : 15758000128 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 4096 KB


eMMC Device Information
Manufacturer ID: TOSHIBA
Device Type : Embedded BGA
Application ID : 00
Product Name : 400073
Product Rev : 0.0
Product SN : AB4142B5
Manufactured : January 1999

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 8000 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
11010034303030373300AB4142B5A235.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\




Start Writing Flash Images...



Flash Image: sboot.bin
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 1

Total Elapsed Time 00:01:41
Write Success!


Flash Image: cm.bin
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 2

Total Elapsed Time 00:01:19
Write Success!


Total Images Written: 2
Process Done!
 
The Following User Says Thank You to ashraf_bcs For This Useful Post:
Old 07-04-2016, 10:12   #320 (permalink)
No Life Poster
 
ashraf_bcs's Avatar
 
Join Date: Jun 2006
Location: Bangladesh
Posts: 2,545
Member: 303373
Status: Offline
Sonork: 100.1584377
Thanks Meter: 1,241
This time J700F
eMMC Test Point Connection Module
================================================== ====
================================================== ====

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.


Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : 11010034303030373300A3E0BC729243
CSD : D07E00320F5903FFFFFFFFE78A4000D1

eMMC Boot Information
Revision 1.7 (for MMC v5.0, v5.01)
BOOT PARTITION : BOOT PARTITION 1
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x4 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 4096 KB
HC ERASE GROUP SIZE: 4096 KB
USER AREA SIZE : 15758000128 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 4096 KB


eMMC Device Information
Manufacturer ID: TOSHIBA
Device Type : Embedded BGA
Application ID : 00
Product Name : 400073
Product Rev : 0.0
Product SN : A3E0BC72
Manufactured : January 1999

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 8000 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
11010034303030373300A3E0BC729243.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\




Start Writing Flash Images...



Flash Image: sboot.bin
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 1

Total Elapsed Time 00:05:43
Write Success!


Flash Image: param.bin
Start Writing 0x00004000 Blocks at 0x0001A800
Partition Selected: USER AREA

Total Elapsed Time 00:04:14
Write Success!


Flash Image: cm.bin
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 2

Total Elapsed Time 00:02:43
Write Success!


Total Images Written: 3
Process Done!
 
The Following User Says Thank You to ashraf_bcs For This Useful Post:
Old 07-04-2016, 11:32   #321 (permalink)
No Life Poster
 
kamiran's Avatar
 
Join Date: Jan 2006
Location: could'nt found yet
Posts: 717
Member: 223973
Status: Offline
Thanks Meter: 155
Quote:
Originally Posted by ashraf_bcs View Post
================================================== ====
eMMC Test Point Connection Module
================================================== ====
================================================== ====

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.


Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : 11010034303030373300AB4142B5A235
CSD : D07E00320F5903FFFFFFFFE78A4000D1

eMMC Boot Information
Revision 1.7 (for MMC v5.0, v5.01)
BOOT PARTITION : BOOT PARTITION 1
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x4 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 4096 KB
HC ERASE GROUP SIZE: 4096 KB
USER AREA SIZE : 15758000128 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 4096 KB


eMMC Device Information
Manufacturer ID: TOSHIBA
Device Type : Embedded BGA
Application ID : 00
Product Name : 400073
Product Rev : 0.0
Product SN : AB4142B5
Manufactured : January 1999

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 8000 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
11010034303030373300AB4142B5A235.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\




Start Writing Flash Images...



Flash Image: sboot.bin
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 1

Total Elapsed Time 00:01:41
Write Success!


Flash Image: cm.bin
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 2

Total Elapsed Time 00:01:19
Write Success!


Total Images Written: 2
Process Done!
can u please tell me what firmware u used for repair....


Br

K@mi
 
Old 07-04-2016, 11:46   #322 (permalink)
No Life Poster
 
allumts's Avatar
 
Join Date: Apr 2011
Age: 58
Posts: 16,408
Member: 1564612
Status: Offline
Thanks Meter: 12,343
Donate money to this user
@Kamiran,

As you have writed:

Quote:
dont wast your time see the previous posts from around the world in this thread only a few people succeed to get their phone alive there must be a glitch for toshiba emmc .... i have tried every single file from sammobile but no luck
Br
 
Old 07-04-2016, 12:12   #323 (permalink)
No Life Poster
 
kamiran's Avatar
 
Join Date: Jan 2006
Location: could'nt found yet
Posts: 717
Member: 223973
Status: Offline
Thanks Meter: 155
Quote:
Originally Posted by allumts View Post
@Kamiran,

As you have writed:



Br
i can post 100 of such logs with no proof of download mode )

Br
 
Old 07-04-2016, 15:02   #324 (permalink)
No Life Poster
 
AgicAga's Avatar
 
Join Date: Sep 2008
Location: FMI OF
Age: 52
Posts: 2,435
Member: 866455
Status: Offline
Sonork: SAMSUNG CPID ONLINE
Thanks Meter: 577
Donate money to this user
================================================== ====
================================================== ====
eMMC Test Point Connection Module
================================================== ====
================================================== ====

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.


Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : 110100343030303733009571BFD0B267
CSD : D07E00320F5903FFFFFFFFE78A4000D1

eMMC Boot Information
Revision 1.7 (for MMC v5.0, v5.01)
BOOT PARTITION : BOOT PARTITION 1
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x4 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 4096 KB
HC ERASE GROUP SIZE: 4096 KB
USER AREA SIZE : 15758000128 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 4096 KB


eMMC Device Information
Manufacturer ID: TOSHIBA
Device Type : Embedded BGA
Application ID : 00
Product Name : 400073
Product Rev : 0.0
Product SN : 9571BFD0
Manufactured : January 1999

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 8000 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
110100343030303733009571BFD0B267.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\




Start Writing Flash Images...



Flash Image: sboot.bin
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 1

Total Elapsed Time 00:00:05
Write Success!


Flash Image: cm.bin
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 2

Total Elapsed Time 00:00:04
Write Success!


Total Images Written: 2
Process Done!
[IMG]***** photo sharing[/IMG]
 
Old 07-04-2016, 17:11   #325 (permalink)
No Life Poster
 
kamiran's Avatar
 
Join Date: Jan 2006
Location: could'nt found yet
Posts: 717
Member: 223973
Status: Offline
Thanks Meter: 155
Quote:
Originally Posted by AgicAga View Post
================================================== ====
================================================== ====
eMMC Test Point Connection Module
================================================== ====
================================================== ====

1. DO NOT USE THE PHONE"S BATTERY
2. Connect the Soldered TP Connections to ATF Box
3. Disconnect the USB Cable and Wait until the
the ATF Software will tell you to Connect the USB.


Interface Reset OK!
eMMC Access Type: SECTOR MODE
eMMC Supported Voltage Range:
3.5-3.6V, 3.4-3.5V, 3.3-3.4V, 3.2-3.3V, 3.1-3.2V
3.0-3.1V, 2.9-3.0V, 2.8-2.9V, 2.7-2.8V, 1.9-2.0V

CID : 110100343030303733009571BFD0B267
CSD : D07E00320F5903FFFFFFFFE78A4000D1

eMMC Boot Information
Revision 1.7 (for MMC v5.0, v5.01)
BOOT PARTITION : BOOT PARTITION 1
PARTITION ACCESS : R/W USER PARTITION
PERM_BOOT_CFG_PROT : DISABLED
PWR_BOOT_CFG_PROT : DISABLED
BOOT MODE : x4 SINGLE DATA RATE + LOW SPEED
RESET BUS WIDTH : ENABLED
eMMC FirmW UPDATE : DISABLED
EMMC CACHE SIZE : 0 KB
SUPER PAGE SIZE : 4096 KB
HC ERASE GROUP SIZE: 4096 KB
USER AREA SIZE : 15758000128 BYTES
BOOT PARTITION SIZE: 4096 KB
RPMB PARTITION SIZE: 4096 KB


eMMC Device Information
Manufacturer ID: TOSHIBA
Device Type : Embedded BGA
Application ID : 00
Product Name : 400073
Product Rev : 0.0
Product SN : 9571BFD0
Manufactured : January 1999

Card Specific Data
CSD_STRUCTURE : Extended
SPEC_VERS : Version 4.1/4.2/4.3
TAAC : 8000 ns
TRAN_SPEED : 4000000 KHz
READ_BL_LEN : 512 Bytes
C_SIZE : HIGH CAPACITY
WP_GRP_ENABLE : YES
WRITE_BL_LEN : 512 Bytes
CONTENT_PROT_APP : NO
PERM_WRITE_PROTECT: NO
TMP_WRITE_PROTECT : NO

Extended CSD Saved:
110100343030303733009571BFD0B267.ext_csd
Backup Directory:
C:\AdvanceBox Turbo Flasher\eMMC\EXT_CSD\




Start Writing Flash Images...



Flash Image: sboot.bin
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 1

Total Elapsed Time 00:00:05
Write Success!


Flash Image: cm.bin
Start Writing 0x00002000 Blocks at 0x00000000
Partition Selected: BOOT 2

Total Elapsed Time 00:00:04
Write Success!


Total Images Written: 2
Process Done!
[IMG]***** photo sharing[/IMG]
phone goes to download mode???


Br
 
Old 07-05-2016, 23:53   #326 (permalink)
No Life Poster
 
AgicAga's Avatar
 
Join Date: Sep 2008
Location: FMI OF
Age: 52
Posts: 2,435
Member: 866455
Status: Offline
Sonork: SAMSUNG CPID ONLINE
Thanks Meter: 577
Donate money to this user
[QUOTE][phone goes to download mode???/QUOTE]
yes phone successfully repaired model j700h-ds regards team
 
Old 07-06-2016, 08:21   #327 (permalink)
Insane Poster
 
Join Date: Jan 2010
Location: russian federation
Posts: 66
Member: 1218019
Status: Offline
Thanks Meter: 6
[QUOTE=AgicAga;11911768]
Quote:
[phone goes to download mode???/QUOTE]
yes phone successfully repaired model j700h-ds regards team
what firmware you used, bro? many have tried but it does not work
 
Old 07-06-2016, 12:08   #328 (permalink)
No Life Poster
 
AgicAga's Avatar
 
Join Date: Sep 2008
Location: FMI OF
Age: 52
Posts: 2,435
Member: 866455
Status: Offline
Sonork: SAMSUNG CPID ONLINE
Thanks Meter: 577
Donate money to this user
Quote:
what firmware you used, bro? many have tried but it does not work
J700HXXU2APE3_J700HOXY2APE3_CAU working for my
 
Old 07-07-2016, 17:23   #329 (permalink)
No Life Poster
 
Join Date: Oct 2010
Location: Abidjan
Age: 38
Posts: 2,478
Member: 1418143
Status: Offline
Thanks Meter: 353
I succefully fixed about 10 pcs , but today I tried one w/o succes .
I tried even with a 6.0 firmware but handset is till dead ..
 
Old 07-10-2016, 13:14   #330 (permalink)
Crazy Poster
 
Join Date: Apr 2013
Posts: 51
Member: 1918840
Status: Offline
Thanks Meter: 11
hi
i have a j700f ds with dead boot and i try with this methode and prosses done
but phone still dead ..

plzzzzzz help
 
 
Page 22 of 27 « First 12192021 22 232425 Last »

Bookmarks

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 



All times are GMT +1. The time now is 06:17.

Contact Us - GSM-Forum - Archive - Top


Powered by Searchlight © 2024 Axivo Inc.
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
- GSM Hosting Ltd. - 1999-2023 -
Page generated in 0.26725 seconds with 9 queries

SEO by vBSEO